Rigging Certified DAS Enclosures with the ANL-2 Eyebolt Set
The DAS Audio ANL-2 is an officially supplied rigging accessory that includes (4) forged M10x40 steel eyebolts and (4) carabiners, designed for safely suspending compatible DAS enclosures that accept M10 hardware. Each eyebolt is manufactured to support flown configurations when inserted into factory-certified mounting points on DAS loudspeakers or brackets.
This kit is applicable across multiple product families, including selected models within the VANTEC, EVENT, and ACTION series. The included carabiners are suited for quick-connect applications during vertical suspension, allowing for secure integration with bumpers or fixed rigging infrastructure.
Whether used in flown clusters, distributed delay zones, or install arrays, the ANL-2 set gives system techs the hardware needed to comply with DAS-certified flying procedures—always assuming the enclosure supports M10 rigging bolts per the product's official specifications.
Real-World Applications and Sound Roles
- Flying EVENT series line arrays using M10-rated bumper points
- Installing VANTEC or ACTION enclosures in fixed ceiling grids
- Quick-deploy carabiner use in truss-based ground-support setups
- AV rental and staging teams needing certified M10 rigging hardware
Where This System Excels
- Speaker Flying: Provides certified M10x40 eyebolt mounting for DAS enclosures rated for flown use.
- Fast Rigging Integration: Included carabiners allow efficient connection to bumpers, truss, or safety points.
- Multi-Series Compatibility: Works with select VANTEC, EVENT, and ACTION series loudspeakers.
- Installation-Ready: Supports permanent mounts when used with official DAS rigging frames or anchor plates.
- Road-Ready Durability: Forged steel components provide secure load handling for portable or fixed PA systems.
Accessory Spotlight
DAS Audio VANTEC-20A: This compact line array module supports M10 flying hardware and is fully compatible with the ANL-2 eyebolt set. Use all four mounting points to safely suspend vertical VANTEC-20A clusters in touring, event, or install environments.
DAS Audio VANTEC-20A-W: The white-finished version of the VANTEC-20A uses the same M10 rigging architecture, allowing the ANL-2 to serve as a direct flying solution for white-clad installations such as worship centers and ballrooms.
DAS Audio VANTEC-118A: This 18 inch powered subwoofer features rear M10 rigging points designed for suspension using DAS-certified eyebolts. When used with compatible frames, the ANL-2 supports subwoofer flying in hybrid array configurations.
DAS Audio VANTEC-118A-W: The white version of the VANTEC-118A shares identical M10 rigging compatibility, making the ANL-2 a ready-to-deploy solution for suspended bass extension in white array systems.
How to Use the DAS Audio ANL-2 Rigging Set in the Field
The DAS Audio ANL-2 rigging accessory is installed by threading each M10x40 forged eyebolt into a certified rigging point on a compatible DAS loudspeaker. All connection points must match DAS's specified torque and thread depth guidelines, and only models with M10-rated mounting positions should be used for flown applications.
Once secured, the included carabiners can be clipped to a bumper frame, safety line, or rigging grid as part of a properly rated flying structure. DAS recommends using all available rigging points when suspending full-range enclosures or subwoofers to ensure balanced load handling and long-term mechanical integrity.
For distributed arrays or architectural installations, the ANL-2 allows quick visual alignment of enclosures while offering DAS-certified metal components for reliable suspension. Always verify mounting point integrity and follow DAS Audio's rigging instructions for each speaker model.
Suspension safety depends on using all certified mounting points and torque specifications listed in the DAS Audio user manuals.
Why Choose the DAS Audio ANL-2 from AVMaxx
At AVMaxx, we understand that rigging is more than just mounting hardware—it's about safety, certification, and peace of mind in every flown system. The ANL-2 kit gives installers and audio pros a direct-match solution for flying DAS speakers without compromise. Every eyebolt and carabiner in this set is manufacturer-certified and used across our own VANTEC and EVENT series configurations.
Whether you're suspending a 3-box cluster of VANTEC-20A units or flying a distributed delay line with ACTION series cabinets, our team can walk you through the hardware points and installation logic from real-world experience. We stock the correct accessories, understand their load ratings, and offer only what DAS certifies for the job.
Choose AVMaxx when safety, product knowledge, and certified rigging integration truly matter to your deployment.
Frequently Asked Questions about the DAS Audio ANL-2
What comes in the DAS Audio ANL-2 kit?
The ANL-2 includes (4) forged steel M10x40 eyebolts and (4) carabiners, all rated for flying compatible DAS enclosures.
Can I use this to fly VANTEC-20A or VANTEC-118A speakers?
Yes. Both VANTEC-20A and VANTEC-118A enclosures feature certified M10 rigging points compatible with the ANL-2 hardware.
Is the ANL-2 suitable for permanent installs?
Yes. When used with speakers featuring approved M10 mounting locations, the ANL-2 can support long-term rigging applications following DAS guidelines.
Are the included carabiners rated for flown systems?
Yes. The carabiners included in the ANL-2 are DAS Audio–approved for use in flown configurations and match the mechanical safety requirements.
Can AVMaxx help me choose the right rigging for my system?
Absolutely. Our team can help identify all DAS-certified flying hardware required for your exact loudspeaker model and deployment style.
For safe and certified rigging solutions backed by manufacturer data, AVMaxx is your trusted source for DAS Audio flying accessories.
