Command the Low End with the DAS Audio VANTEC-118A-W Powered Subwoofer
The DAS VANTEC-118A-W is a premium 18-inch powered subwoofer designed to deliver professional-grade bass reinforcement with the aesthetic flexibility required in elegant or architecturally sensitive environments. Finished in clean white ISO-flex paint and housed in a robust birch plywood enclosure, it balances high-output performance with discreet visual presence—ideal for houses of worship, corporate installs, and high-end event production.
Driven by a high-efficiency 2000W Class D amplifier, the VANTEC-118A-W employs DAS Audio’s 18FW4 transducer with a 4-inch voice coil in a front-loaded, direct-radiating configuration. This delivers tight, punchy low-frequency response with minimal distortion and a peak SPL of up to 134 dB. Whether used in standalone sub deployment or integrated into a VANTEC-series full-range stack, it provides the headroom and clarity needed to anchor even the most dynamic audio systems.
Rear panel controls include gain, polarity, and a variable low-pass filter for fine-tuned system matching. The integrated pole socket supports satellite top mounting, while the side handles and compact footprint make transport and positioning fast and efficient. Built to perform on the road or in fixed installations, the VANTEC-118A-W is a powerful solution for any application that demands clean aesthetics without compromising sonic authority.
Real-World Applications and Sound Roles
Perfect for portable PA rigs, flown venue arrays, mobile AV rental setups, and white-themed performance environments, the VANTEC-118A-W empowers sound professionals with flexible DSP tuning, rugged construction, and refined industrial design—making it a go-to subwoofer for environments where look and performance must go hand in hand.
Where the DAS VANTEC-118A-W Excels
- House of Worship Audio: The clean white finish, tight low-frequency extension, and visual discretion make it ideal for sanctuaries and multipurpose worship venues.
- Corporate AV & Fixed Installations: Perfect for ballrooms, museums, and event spaces requiring aesthetics and intelligible bass with tight DSP control.
- Luxury Events & Rentals: Preferred by mobile AV providers serving weddings, galas, and upscale outdoor events that demand sonic power without industrial appearance.
- Touring Sound & Mobile Rigs: Easily stackable, pole-mountable, and rugged enough for daily transport—providing scalable low-end reinforcement for any VANTEC-based system.
- DJ and Club Extensions: Adds clarity and punch below 100Hz for DJs who demand clean, distortion-free bass response in stylish venues or hybrid club spaces.
Accessory Spotlight
- DAS Audio VANTEC-20A-W: Full-range white companion speaker designed to pair seamlessly with the VANTEC-118A-W for scalable, matched system deployment.
- ProX T-SS28P Heavy Duty Speaker Stands (Pair + Bag): Support satellite top mounting via sub’s integrated pole socket—durable, transportable, and stage-ready.
- Pig Hog PHM10 10ft XLR Cable: Reliable signal connectivity with thick 8mm jacket and tour-grade build—ideal for linking mixers, DSPs, or controller outputs to the VANTEC-118A-W input.
- DAS Audio INTEGRAL-M26X DSP Processor: 2-in/6-out 1U rack-mount digital signal processor with ALMA™ software control, advanced routing, EQ, limiting, and custom VANTEC presets—ideal for centralized loudspeaker management.
Control Modes of the DAS VANTEC-118A-W Powered Subwoofer
The VANTEC-118A-W includes onboard DSP accessible directly from the rear panel, enabling fast, flexible control for various deployment needs. Key tuning options include a variable low-pass filter (LPF) with adjustable crossover points, a polarity invert switch for phase alignment, and a master gain control to match signal levels within multi-speaker systems. These direct-access features ensure optimal performance when stacking with full-range tops or integrating into more complex arrays.
For advanced system tuning and preset recall, the subwoofer can be managed externally through the optional INTEGRAL-M26X DSP. This rack-mount processor allows precise filtering, limiting, EQ, and delay per output channel—essential for time-aligning sub arrays or creating custom system curves. Whether you're running a simple two-box setup or a zoned multi-point deployment, the control options on the VANTEC-118A-W provide professional-grade flexibility at every level.
How to Deploy the DAS VANTEC-118A-W in the Field
For fast setup, place the VANTEC-118A-W on a stable surface near the performance zone, with the front-firing port facing forward for clean bass projection. Use the integrated M20 pole socket to mount a full-range top like the VANTEC-20A-W directly above for a compact vertical system. For stereo or distributed setups, space units evenly across the front of house for balanced sub coverage.
Use high-quality XLR cables like the Pig Hog PHM10 to feed signal from your mixer or DSP to the sub’s input. Dial in crossover and gain settings using the rear-panel DSP, or integrate with the INTEGRAL-M26X for remote control, preset recall, and precision management across zones. Always test phase polarity when combining with multiple subs or satellite tops to avoid cancellation.
With intuitive onboard control, the VANTEC-118A-W simplifies setup without sacrificing sonic integrity.
Recommended System Pairings for the DAS VANTEC-118A-W
Amplifier Architecture of the DAS VANTEC-118A-W
At the heart of the VANTEC-118A-W lies a high-efficiency 2000W Class D amplifier engineered for sustained output, low thermal loss, and ultra-fast transient response. This next-gen amplification stage drives a custom-designed 18FW4 transducer with a 4-inch voice coil, offering high excursion and control at extreme SPL levels.
Built for reliability in both portable and installed applications, the amplifier module integrates a universal power supply for seamless operation between 90–250V AC, active PFC (Power Factor Correction), and optimized thermal management via side-mounted cooling vents. It supports a peak SPL output of 134 dB while maintaining clear, distortion-free performance throughout the extended bass range.
This onboard architecture ensures the VANTEC-118A-W maintains consistent low-frequency authority without requiring an external amplifier—streamlining cabling, deployment time, and total system footprint.
Digital Signal Processing in the DAS VANTEC-118A-W
The VANTEC-118A-W includes onboard DSP controls located on the rear panel, offering quick-access filtering and level tuning directly from the unit. These controls include a variable low-pass filter for crossover frequency adjustment, a polarity switch for phase correction, and gain attenuation to balance output when combined with tops or arrays.
For advanced system tuning, the VANTEC-118A-W integrates seamlessly with the DAS INTEGRAL-M26X processor. This external 2-in/6-out DSP unlocks routing, parametric EQ, alignment delay, RMS limiting, and preset management via ALMA™ software or direct control. When used together, the onboard and rackmount DSP capabilities provide a complete signal control solution—from fast plug-and-play to professional loudspeaker optimization.
Why Choose the DAS VANTEC-118A-W from AVMaxx?
AVMaxx offers more than just the subwoofer—we deliver a complete experience backed by expert knowledge, precision system design, and direct access to DAS Audio's most powerful low-frequency technology. When you purchase the VANTEC-118A-W from us, you're choosing a vetted solution that’s been optimized for real-world deployment.
We stock all key accessories—including DSP controllers, speaker poles, XLR cabling, and full-range tops—to help you assemble a matched, professional system. Our team understands the demands of mobile production, venue installation, and worship system design. That means when we recommend the VANTEC-118A-W, we back it with proven gear pairing strategies, custom support, and system clarity you won’t find anywhere else.
Frequently Asked Questions
Can the VANTEC-118A-W be used in permanent installations?
Yes. Its white ISO-flex finish and M20 pole socket make it ideal for installed systems in sanctuaries, galleries, and multipurpose venues where aesthetics are important.
What DSP controller works best with this sub?
The
INTEGRAL-M26X is DAS Audio’s recommended DSP unit. It offers presets, routing, and limiter protection tuned specifically for the VANTEC series.
What crossover frequency should I use?
The onboard DSP allows user-configurable LPF. Start around 80–100 Hz when pairing with VANTEC full-range tops for a smooth transition.
Does this sub include a pole mount?
Yes. The subwoofer has an integrated M20 threaded pole socket compatible with standard speaker poles for stacking full-range cabinets above.
Own the low end with power, clarity, and confidence—add the DAS VANTEC-118A-W to your AVMaxx system today and experience subwoofer performance without compromise.
