Deploy VANTEC Line Arrays with Confidence Using the DAS Audio AX-VT20
The DAS Audio AX-VT20 is an official rigging bumper designed specifically for use with the VANTEC-20A line array system. Built from certified structural-grade steel, it enables safe flying or ground-stacked deployment of up to five VANTEC-20A units in a vertical array. With factory-rated integrity and field-tested performance, this bumper ensures secure suspension in both touring and permanent installs.
The AX-VT20 frame incorporates eleven strategically positioned pickup points, allowing system integrators and technicians to fine-tune hang angles and array alignment. Adjustable tilt positions provide crucial vertical aiming flexibility—ideal for matching coverage across variable venue geometries. Whether you're flying straight clusters, curved arrays, or ground-stacking with bass reinforcement, the AX-VT20 adapts without compromising safety or coverage.
Certified for mixed-configuration loads, the AX-VT20 supports deployment of four VANTEC-20A tops combined with up to two VANTEC-118A subwoofers using appropriate stacking hardware. The bumper’s durability and modular adaptability make it equally suitable for mobile event production, rental inventory, or permanent house-of-worship installs where compact line array performance is critical.
Real-World Applications and Sound Roles
- Flying arrays of up to 5 DAS VANTEC-20A speakers
- Mixed hangs with VANTEC-118A subwoofers for full-range coverage
- Ground-stacked systems for temporary stages and mobile DJ events
- Venue installs demanding tilt-adjustable flown arrays
- Certified suspension for rental houses and AV integrators
All deployment capabilities listed here are certified directly by DAS Audio and align with VANTEC system architecture for safety and optimal performance.
Where the DAS Audio AX-VT20 Rigging Bumper Excels
- Certified Multi-Unit Suspension: Supports flying or ground-stacking up to five VANTEC-20A units with verified structural integrity.
- Flexible Mixed Configuration Support: Deploy four VANTEC-20A tops with two VANTEC-118A subs in stacked array setups.
- 11 Pickup Points: Multiple rigging positions enable precise array angling and weight distribution.
- Tilt-Adjustable Design: Fine-tune vertical dispersion for optimized audience coverage across any venue.
- Road-Ready Steel Construction: Built to handle touring demands while integrating cleanly into installed systems.
Accessory Spotlight
DAS Audio VANTEC-20A: This compact powered line array module is fully compatible with the AX-VT20 rigging bumper, allowing safe suspension of up to five VANTEC-20A units per frame. Perfect for mobile DJs, touring sound providers, or installed venues demanding high output and vertical control.
DAS Audio VANTEC-118A: For stacked configurations, the AX-VT20 supports hybrid deployments that combine four VANTEC-20A tops with two VANTEC-118A subwoofers. Ideal for scalable PA stacks in ballrooms, stages, or houses of worship where full-range delivery and safe rigging are mission critical.
How to Deploy the DAS Audio AX-VT20 in the Field
The AX-VT20 black rigging bumper is engineered for certified integration with the DAS Audio VANTEC-20A line array system. Up to five enclosures can be safely flown from a single bumper using standard quick-lock rigging pins. Dual bumper arrays are fully supported for higher-output coverage or when designing delay hangs, front fills, or zone-specific clusters.
For ground-stacked systems, the AX-VT20 can be secured onto VANTEC-118A powered subwoofers using approved stacking hardware to create solid, modular PA towers suitable for touring rigs, mobile DJ setups, or event production platforms.
During transport, AX-VT20 frames may remain attached to the topmost VANTEC-20A cabinet or be loaded separately into DAS PL-VT20S dollies for efficient storage and movement across venues or stages.
All rigging workflows must follow DAS Audio's official guidelines for vertical load and suspension safety.
Why Choose the DAS Audio AX-VT20 from AVMaxx
At AVMaxx, we understand that rigging is not just about lifting—it’s about trust, safety, and seamless integration with your system. The DAS Audio AX-VT20 isn’t just another bumper—it’s a factory-certified rigging frame we use ourselves in flown VANTEC-20A deployments across mobile DJ arrays, church installs, and corporate live sound setups. We don’t just stock this product—we’ve built stages with it.
Our team is trained in DAS-certified rigging architecture and array logic, meaning we can help you spec, configure, and deploy AX-VT20 bumpers for any scale of use, from a four-box ballroom rig to a dual-bumper delay stack for a 1,000-seat venue. Every bumper we ship is backed by real-world experience and personalized support.
AVMaxx is your source for DAS Audio rigging solutions—with product knowledge that goes beyond the manual and into the field.
Frequently Asked Questions about the DAS Audio AX-VT20
How many VANTEC-20A speakers can I fly with this bumper?
The AX-VT20 supports up to five DAS Audio VANTEC-20A units in a single flown configuration, using certified rigging points and factory hardware.
Can I ground-stack this bumper with subwoofers?
Yes. The AX-VT20 is compatible with ground-stacked systems using DAS VANTEC-118A subwoofers and appropriate stacking hardware for safe deployment.
Is the AX-VT20 a good option for mobile DJs?
Absolutely. Its compact form factor, quick-connect compatibility, and support for stacked towers make it ideal for portable DJ PA setups and event work.
Can I combine this bumper with white VANTEC-20A-W units?
No. The AX-VT20 is black and intended for use with black VANTEC-20A enclosures. For white systems, use the AX-VT20-W version.
Does AVMaxx offer full system bundles with this rigging bumper?
Yes. We build complete VANTEC-20A system packages that include AX-VT20 bumpers, subs, covers, dollies, and everything needed for professional deployment.
From flown installs to mobile DJ towers, AVMaxx has the AX-VT20 expertise, gear, and system support you need to rig your array right the first time.
