Outdoor-Ready COB UV Wash with Flicker-Free Control
The ADJ UV PAR 100IP is a high-powered, IP65-rated ultraviolet LED fixture built for demanding outdoor and indoor environments. Its core engine is a single 100W COB (Chip On Board) UV LED with a massive 120° beam angle, optimized for even blacklight coverage across walls, stages, truss, and décor. With a wavelength range of 390–399nm, it delivers deep, vivid ultraviolet output ideal for clubs, concerts, theatrical scenes, and blacklight activations.
Designed for precision control, the UV PAR 100IP supports both DMX and RDM protocols, and includes four DMX modes (1, 2, 3, and 6 channels). It provides six dimming mode presets, four dimming curves, linear and randomized strobe patterns, and full 0–100% dimming—all accessible via an OLED touchscreen or remote control consoles. Built-in LED refresh rates from 900Hz to 25kHz make it flicker-free and camera-ready for video shoots and broadcast environments.
Physically, this fixture is a tour-grade tool. Its sealed power and DMX connectors are IP65-rated, while the rugged metal housing and scissor yoke with Omega bracket receivers ensure it mounts reliably in any orientation. Built for install pros, event producers, and mobile techs alike, the UV PAR 100IP merges high-output UV with weather-sealed resilience.
Real-World Applications and Sound Roles:
- Outdoor blacklight shows and themed environments
- Concerts, festivals, and large-scale glow parties
- Theatrical FX and scenic lighting with UV-reactive props
- Permanent architectural or venue installs
- DJ glow booths, truss facades, and event uplighting
Where This System Excels
- Outdoor Blacklight Wash: IP65 rating with sealed connectors ensures reliable UV output in rain, dust, and high-moisture environments.
- Wide Coverage: 120° native beam spread saturates large areas with fewer fixtures—ideal for walls, ceilings, and truss washes.
- Flicker-Free Video Lighting: Adjustable 900Hz–25kHz refresh rate eliminates flicker on camera and stage broadcast systems.
- DMX + RDM Control: Full remote addressing and status feedback over pro lighting networks, including Aria X2 support.
- All-In-One Touring Build: Metal housing, locking IP65 connectors, and scissor yoke make this fixture stage-ready right out of the box.
Control Modes for the UV PAR 100IP
The UV PAR 100IP offers flexible control options for both manual and console-driven operation, with robust DMX trait structuring and RDM compatibility:
- DMX Channel Modes: 1, 2, 3, and 6-channel modes to support basic through advanced programming needs.
- Dimming Modes: 6 selectable options — Standard, Stage, TV, Architectural, Theatre, and Stage 2.
- Dimming Curves: 4 user-selectable curves — Square, Linear, Inverted Curve, and S-Curve.
- Strobe Effects: Built-in Linear, Pulse, and Random strobe control.
- Dim Speed Control: Adjustable from 0.1 to 10 seconds for custom fade behavior.
- Refresh Rate Control: 900Hz to 25kHz selectable range to ensure flicker-free operation for video and camera setups.
- Display Navigation: 4-button OLED touchscreen with intuitive menu logic for setup without external gear.
- Protocol Support: DMX512, RDM, and Aria X2 wireless-ready infrastructure (external transceiver required).
COB UV Output & 120° Beam Control in the UV PAR 100IP
At the heart of the UV PAR 100IP is a powerful 100-watt COB ultraviolet LED operating in the 390–399nm wavelength range, optimized for deep-reactive UV response without visible purple spill. The integrated Chip-On-Board design maximizes surface density and efficiency, producing rich blacklight output while minimizing glare.
This UV engine pushes light through a custom-engineered optical array, delivering a native 120° beam angle that’s ideal for broad coverage across floors, walls, ceilings, or scenic structures. Whether hung from truss, positioned as an uplight, or built into a scenic element, the fixture floods with clean, even distribution—no beam hotspots or shadows.
DMX Channel Modes & Trait Control Architecture
The UV PAR 100IP supports 4 DMX channel configurations, offering flexibility for integration into both minimal and full-universe show files:
- 1CH Mode: Master dimmer
- 2CH Mode: Dimmer + strobe
- 3CH Mode: Dimmer + strobe + dimming mode
- 6CH Mode: Full access to dimming, strobe, dimming mode, dimming curve, speed, and refresh rate
All channels are mapped for fast recall on modern lighting consoles, and RDM support allows remote addressing, status polling, and fixture setup—ideal for high-ceiling or difficult-to-reach installations. The fixture is also Aria X2 wireless-ready when paired with compatible transmitters or receivers.
Strobe Engine, Dimming Logic & Refresh Rate Control
Beyond basic on/off UV illumination, the UV PAR 100IP includes a versatile internal logic engine with:
- Linear, Pulse, and Random Strobe: All speed-controllable and compatible with external timecode
- 6 Dimming Modes: Tailored for different environments—Standard, Stage, TV, Architectural, Theatre, and Stage 2
- 4 Dimming Curves: Square, Linear, Inverted, and S-Curve for shaping fade profiles
- Dimming Speed Control: Adjustable from 0.1 to 10 seconds
- Refresh Rate Control: 900Hz to 25kHz for flicker-free camera compatibility
This internal engine makes the fixture equally at home in broadcast lighting rigs, architectural builds, and fast-paced DJ or festival productions where precision fades and video compatibility are mandatory.
Housing Design, IP Rating & Mounting Options
The UV PAR 100IP is built around a fully metal chassis with sealed IP65-rated connections for both DMX and power, enabling long-term use in outdoor or exposed environments. Protective rubber caps cover each input when not in use to maintain weatherproof integrity.
Mounting is handled by a rugged scissor yoke with Omega bracket receivers (Omega bracket sold separately), allowing truss, clamp, or floor-based installs. A dedicated safety cable loop is welded into the frame, supporting rigging in overhead and high-risk zones.
Whether deployed on an outdoor stage, architectural structure, or as part of a mobile blacklight kit, the fixture’s all-weather housing and locking power make it ready for the field.
How to Deploy the UV PAR 100IP in the Field
The UV PAR 100IP is designed for fast, secure mounting in both temporary and permanent setups. Its IP65-rated connectors and weatherproof housing make it fully compatible with outdoor stages, architectural installations, and scenic design applications.
- Truss Hanging: Use the integrated scissor yoke and Omega bracket receivers with standard clamps (not included) to rig from overhead truss or grid structures.
- Ground Placement: The dual yoke functions as a floor stand for uplighting walls, scenic elements, or backdrops with consistent 120° UV coverage.
- Permanent Install: Ideal for fixed outdoor locations—mount to walls, ceilings, or beam supports using safety-rated clamps and locking IP-rated cables.
- Event Deployment: For mobile DJs or production techs, the unit’s compact footprint and locking I/O allow fast plug-and-play integration—even in wet zones.
To maintain IP65 protection, always use outdoor-rated power and DMX cables with sealed connections. Rubber port caps should remain in place on unused inputs during operation.
Why Choose the ADJ UV PAR 100IP from AVMaxx
At AVMaxx, we don’t just stock IP65-rated UV fixtures—we deploy them. The UV PAR 100IP is trusted by our install partners and touring clients because we’ve seen firsthand how it holds up in rain, dust, rooftop venues, and blacklight activations with zero compromise. Whether you’re lighting a high school glow party, outdoor festival rig, or building a permanent UV wash wall, we can help spec the right spacing, control gear, and weather-rated accessories to support your design.
We understand beam spread, wavelength accuracy, and refresh rates—not just as specs, but as mission-critical factors for your success. That’s why production crews, designers, and DJs count on AVMaxx as more than a store. We’re your deployment partner.
Frequently Asked Questions
Q: Is the UV PAR 100IP safe for permanent outdoor installs?
A: Yes. As long as IP65-rated DMX and power cables are used, the fixture is sealed for long-term exterior use in wet, dusty, or sandy environments.
Q: Can I run this fixture wirelessly?
A: The UV PAR 100IP supports Aria X2 wireless via external transmitter/receiver units, allowing for cable-free DMX distribution when needed.
Q: Does it flicker on camera?
A: No. With adjustable refresh rates from 900Hz to 25kHz, it’s fully flicker-free and camera-safe for livestreaming, broadcast, and recording.
Q: What kind of strobe and dimming control does it offer?
A: You get linear, pulse, and random strobe effects, plus 6 dimming modes, 4 dim curves, and a speed setting from 0.1 to 10 seconds.
Q: Is this fixture useful for DJs doing glow events?
A: Absolutely. It’s compact, high-output, IP65-rated, and ideal for glow parties, blacklight décor, or UV-reactive facades in mobile DJ rigs.
Designing a pro-level UV wash system? Let AVMaxx help you spec the ADJ UV PAR 100IP for safe, flicker-free, weather-ready installs and events.
