Shure PGXD24/BETA58

Shure PGXD24/BETA58 adds the clarity of 24-bit digital audio to the famed PGX line of Shure wireless products. Offering tailored wireless solutions for vocalists, guitarists, and presenters, PGX Digital combines the trusted legacy of Shure microphones with state of the art, 24-bit digital wireless technology that delivers strong, clean RF performance. The result is wireless audio that sounds like wired, rock-solid RF signal, and simple setup and operation.

The PGX Digital Beta 58A® Vocal Wireless System from Shure adds the clarity of 24- bit digital audio to the legacy of trusted Shure microphone options for wireless performance. This system includes the Beta 58A, a precision-engineered supercardioid dynamic microphone optimized for lead vocal applications. Included: PGXD4 wireless receiver, Beta 58A microphone with PGXD2 handheld transmitter, padded carrying case, microphone clip.

Specifications

• Overall System:
  • Operating Range: 200 ft. (60 m) under typical conditions. (Actual range depends on RF signal absorption, reflection and interference.)
  • RF Carrier Range: X8: 902 928 MHz, X8A: 915 928 MHz, X8B: 902 907.5 MHz, 915 928 MHz (Note: varies by region)
  • Audio Frequency Response (± 2dB): 20 Hz - 20 kHz
  • System Gain: PGXD2: 0 dB at minimum gain setting, 6.35 mm (1/4 ) connector / -12.5 dB at minimum gain setting, XLR output
  • PGXD1: -54.5 dBV/Pa at -10 dB gain setting, with SM58 catridge, XLR output
  • Total Harmonic Distortion: < 0.02%, A-weighted, typical (Ref. 1 kHz, 6 dB below input clip)
  • Dynamic Range: > 108 dB A-weighted
  • Operating Temperature Range: -18°C (0°F) to +50°C (+122°F). Note: battery characteristics may limit this range.
  • Audio Input Level: +5dBV maximum at -10dB gain position / -5dBV maximum at 0dB gain position
• PGXD2 Handheld Transmitter:
  • Gain Adjustment Range: 10dB
  • RF Output Level: 10mW maximum (dependent on applicable country regulations)
  • Housing: Molded PC/ABS handle and battery cup
  • Dimensions (including SM58 cartridge): 10" x 2" x 2"
  • Weight: 10.2 oz without batteries
  • Power: 2 "AA" size batteries
  • Battery Life: Up to 9 hours
• PGXD4 Wireless Receiver:
  • Dimensions: (HxWxD) 40 mm x 181 mm x 104 mm (1.6" x 7.125" x 4.1")
  • Weight: 289 g (10.2 oz.)
  • Housing: ABS
  • Audio Output Level: (ref. ± 38 kHz deviation, 1 kHz tone): XLR connector (into 3,000 Ohm load): -2.5 dBV / 1/4" connector (into 10,000 Ohm load):+10 dBV
  • Impedance:
    • XLR: 50 Ohms
    • 1/4": 50 Ohms
  • Sensitivity: -102 dBm @ 10-5 BER
  • Image Rejection: > 70 dB, typical
  • XLR output (Impedance balanced):
    • Pin 1: Ground (cable shield)
    • Pin 2: Audio
    • Pin 3: No Audio
  • Audio LED:
    • Red: 2 dB below clip
    • Amber: 12 dB below clip
    • Green: 50 dB below clip
  • Power Requirements: 12 - 18Vdc at 150 mA, supplied by external power supply
  • Pin Assignments:
    • XLR: 1 = ground, 2 = hot, 3 = cold
    • 1/4 TRS: Tip = audio, Ring = no audio, Sleeve =ground