PGXD14/85 System Features:

PGXD1 Bodypack Transmitter with WL185 Lavalier Microphone:

• Cardioid condenser lavalier microphone for general purpose sound reinforcement
• Smooth extended frequency response with presence rise specially tailored for chestworn microphone operation
• Power, mute, and battery status LED
• Up to 10 hours of continuous use from 2 AA batteries
• 200ft (60m) operating range
• Rugged construction for reliable performance show after show
• Low profile bodypack, easily clips onto belts or clothing

PGXD4 Wireless Receiver:

• 24-bit / 48 kHz digital technology for incredibly accurate sound
• Automatic frequency selection locates a clear channel instantly
• One-touch sync automatically syncs the transmitter and receiver
• True digital diversity for rock-solid wireless signal reliability
• Up to 10 compatible channels per frequency band
• ¼" and XLR audio outputs
• Included padded carrying case for portability and protection

Synchrony Financing

Apply Now

Shure PGXD14/85 System Specifications:

• Operating Range*: 200ft (60m) under typical conditions.
  *Note: Actual range depends on RF signal absorption, reflection, and interference
• RF Carrier Range:
  • X8: 902 928 MHz
  • X8A: 915 928 MHz
  • X8B: 902 907.5 MHz
  • 915 928 MHz (Note: varies by region)
• Audio Frequency Response (± 2dB): 20 - 20,000 MHz
• System Gain:
  • PGXD2:
    • 0 dB at minimum gain setting, ¼" (6.35mm) connector
    • -12.5 dB at minimum gain setting, XLR output
  • PGXD1: -54.5 dBV/Pa at -10dB gain setting, with SM58 catridge, XLR output
• Total Harmonic Distortion: <0.02%, A-weighted, typical (Ref. 1 kHz, 6 dB below input clip)
• Dynamic Range: >108 dB (A-weighted)
• Operating Temperature Range*: 0°F (-18°C) to +122°F (+50°C)
  *Note: battery characteristics may limit this range.

PGXD1 Bodypack Transmitter with WL185 Lavalier Microphone Specifications:

• Audio Input Level:
  • +10 dBV maximum, at minimum gain setting
  • -16 dBVmaximum, at maximum gain setting
• Gain Adjustment Range: 26 dB
• Input Impedance: 1 M ohms
• RF Output Level: 10 mW maximum (dependent on applicable country regulations)
• Dimensions (HxWxD): 4.25" x 2.50" x 0.75" (108 x 64 x 19mm)
• Weight: 4.5 oz (128 g) without batteries
• Housing: Molded polycarbonate case
• Power Requirements: 2 AA size
• Battery Life: Up to 10 hours

PGXD4 Wireless Receiver:

• Dimensions (HxWxD): 1.6" x 7.125" x 4.1" (40 x 181 x 104 mm)
• Weight: 10.2 oz (289 g)
• Housing: ABS
• Audio Output Level: (ref. ± 38 kHz deviation, 1 kHz tone):
  • XLR connector (into 3,000-Ohm load): -2.5 dBV
  • ¼" connector (into 10,000-Ohm load): +10 dBV
• Impedance: XLR: 50 Ohms / ¼": 50 Ohms
• Sensitivity: -102 dBm @ 10-5 BER
• Image Rejection: > 70 dB, typical
• XLR output (Impedance balanced):
  • Pin 1: Ground (cable shield)
  • Pin 2: Audio
  • Pin 3: No Audio
• Audio LED:
  • Red: 2 dB below clip
  • Amber: 12 dB below clip
  • Green: 50 dBbelow clip
• Power Requirements: 12-18 VDC at 150mA, supplied by external power supply
• PinAssignments:
• XLR: 1=ground, 2=hot, 3=cold
• ¼" (6.35mm) TRS: Tip=audio, Ring=no audio, Sleeve=ground

• PGXD4 receiver
• PGXD1 bodypack transmitter
• WL185 lavalier microphone
• Tie clip
• Power supply
• 2 AA batteries
• Carrying case
• User guide