Reloop RP-7 Turntables + ELITE DVS Mixer Package

Reloop RP-7 (Pair) + ELITE DVS Mixer: Purpose-Built 45s Culture Bundle

For the collectors. For the culture. This bundle pairs two Reloop RP-7 direct-drive turntables with the Reloop ELITE high-performance Serato DVS mixer to celebrate 7" vinyl while meeting pro demands. The RP-7 brings a newly developed brushless DC motor with 2.5 kgf/cm starting torque, a precision die-cast 215 mm platter, and a straight copper tonearm with internal damping—all tuned for accurate tracking and advanced scratching. The ELITE anchors the rig with dual 24-bit 10×10 USB, 16 velocity-sensitive RGB pads per mixer (8 per side), and three Mini Innofader Pro faders for surgical control.

Speed, pitch, and feel—dialed for performance: RP-7 offers 33 1/3, 45, and 78 RPM plus a clickless tempo fader with ±8%, ±16%, or ±35% ranges and a pitch reset. On the mixer, Tweak FX with color-coded, bipolar control covers filter, crush, flanger, white noise, and a user mode, while two independent FX units and mini-fader depth control shape transitions. ELITE’s dual OLEDs keep BPM, beat divisions, and FX states visible in low light. Together, the system is a battle-ready 45s platform that travels from club booths to showcases and livestreams without compromise.

• Real-World Roles:
• 45s tribute sets and scratch showcases that demand tight torque and pad-driven creativity.
• Club and event rigs needing seamless dual-laptop handoffs and reliable DVS control.
• Collectors who want pro-grade 7" playback with minimized wow/flutter and rock-solid tracking.
• Livestream and content workflows that benefit from multichannel USB, Rec Out, and clear OLED feedback.

If you want to take a deep dive into each item in bundle, or Check out our Recommended Accessories:

Where This Bundle Excels

• 45s-First Performance: RP-7’s motor, platter, and straight tonearm design support precise 7" cueing and scratch techniques.
• Serato-Centric Workflows: ELITE’s 16 RGB pads per side, dual OLEDs, and deep pad modes keep your hands on the mixer.
• Back-to-Back Changeovers: Dual 10×10 USB (24-bit) enables laptop swaps without dead air.
• Tempo Authority: ±8% / ±16% / ±35% pitch ranges with clickless fader and pitch reset for confident beat adjustments.
• Club-Grade I/O: Balanced XLR master, balanced TRS booth, dedicated Rec Out, and dual headphone jacks cover venue and recording needs.
• Clean Install: RP-7’s recessed terminal, gold-plated outputs, and detachable IEC/RCA make neat, reliable wiring easy.

Control Modes

Reloop ELITE — Performance & FX Control

• Pad Modes (per deck): Hot Cue, Loop Roll, Slicer, Sampler, Pitch Play, Saved Loop, Slicer Loop, Saved Flips, Platter Play, Transport, User, Scratch Bank.
• Tweak FX (bipolar, color-coded): Filter, Crush, Flanger, White Noise, plus User mode.
• FX Architecture: 2 independent FX units, 3 assignable FX slots per side, dedicated on buttons, mini-fader for level/depth (Hold or Toggle).
• Faders: 3× Mini Innofader Pro with custom curves, reverse (hamster), and digital cut-in/out adjustment.
• EQ / Filters: 3-band isolator (full kill), per-channel filter control.
• USB & Routing: Dual 10×10 USB (24-bit), Focus PC switching, sampler/AUX routable through Serato FX.
• Displays: 2 high-contrast OLEDs for effects, BPM, beat divisions, and setup feedback.

Reloop RP-7 — Transport & Pitch Control

• Speeds: 33 1/3, 45, and 78 RPM with strobe indicator.
• Pitch: Clickless tempo fader with ±8%, ±16%, or ±35% ranges; pitch reset toggle.
• Motor Behavior: 8-pole, 3-phase high-torque brushless DC motor; electronic brake; start-up < 1 sec (at 78 RPM).
• Visibility: Detachable, freely rotatable LED needle illuminator in unibody aluminum design.

Dual USB 10×10 DVS Interface (24-bit) & Focus PC Switching

Two independent USB paths keep both laptops live for uninterrupted handoffs. The 10×10, 24-bit interface supports clean recording, sampler routing, and booth management from the mixer.

16 RGB Performance Pads & 12 Modes per Deck

Velocity-sensitive pads deliver responsive control with clear color feedback. Run different pad modes per side to stack cues, rolls, or Scratch Bank workflows without menu diving.

Fader System: 3× Mini Innofader Pro

Non-contact, high-resolution faders (cross & lines) provide ultra-precise cuts with custom curves, reverse, and digital cut-in/out settings in the setup menu.

Tweak FX & Dual FX Units

Bipolar, color-coded Tweak FX (Filter, Crush, Flanger, White Noise, User) plus two independent FX units with 3 assignable slots per side and mini-fader depth (Hold/Toggle) enable expressive shaping on the fly.

Dual OLED Displays & Surface Feedback

High-contrast OLEDs keep effects, BPM, beat divisions, and system states readable in low light, reducing laptop reliance during routines.

I/O & Monitoring Topology

Balanced XLR master, balanced TRS booth (independent), dedicated Rec Out, and dual headphone jacks (6.3 mm & 3.5 mm) cover venue and capture scenarios cleanly.

Direct-Drive Motor & Platter Stability

8-pole, 3-phase brushless DC motor with 2.5 kgf/cm starting torque drives a precision 215 mm die-cast aluminum platter. Finely tuned characteristics help minimize wow & flutter for reliable cueing and scratching.

Straight Copper Tonearm & Tracking

Internally damped, straight copper tonearm with height-adjustable VTA base (0–6 mm) and static balance design focuses on tracking accuracy. The system eliminates the need for anti-skating to simplify setup.

Tempo Control & Pitch Logic

Clickless tempo fader supports ±8% / ±16% / ±35% ranges with a pitch reset toggle, giving DJs fast, precise BPM control across 33 1/3, 45, and 78 RPM.

Power Architecture & Noise Management

Integrated switching power supply and robust chassis help reduce interference. Electronic brake control and a start-up time < 1 sec (at 78 RPM) support responsive transport.

Connectivity, Cabling & Layout

Recessed connection terminal with switchable phono/line outputs (gold-plated) and IEC mains promotes neat installs and port protection. GND earth connection provided.

Visibility & Included Accessories

Detachable LED needle light improves groove visibility. Included: platter, vinyl puck with recessed slot, slipmat, slip sheet, LED light, counterweight, phono RCA with ground, mains cable, and instruction manual (headshell & cartridge sold separately).

How to Deploy This Bundle

1) Positioning & Power

• Place turntables: set both RP-7s on a stable surface; isolate from vibration where possible. Connect IEC mains and switch each deck to the appropriate voltage (auto-ranged PSU).
• Mixer power: connect ELITE to AC and leave power off until wiring is complete.

2) Tonearm & Cartridge (RP-7)

• Mount headshell/cartridge: install per your cartridge guidelines (headshell & cartridge not included).
• Balance tonearm: set counterweight for neutral balance, then dial recommended tracking force; adjust VTA (0–6 mm) so the arm sits level on record.

3) Audio Wiring

• Choose output mode on each RP-7: set Phono (to mixer phono inputs) or Line (to mixer line inputs) as required; connect GND leads if using phono.
• Connect to ELITE: RP-7 L/R to CH1 and CH2 on ELITE. Wire ELITE’s master (XLR) to PA, booth (TRS) to monitors, and Rec Out to recorder if needed.

4) USB & DVS

• Dual laptops: connect both computers to ELITE’s dual USB (10×10, 24-bit). Launch Serato DJ Pro on each.
• Input type: in software, set each channel to match RP-7 output (phono/line). Calibrate control signal for DVS.

5) Performance Prep

• Pads & modes: assign your pad modes (Hot Cue, Loop Roll, Slicer, Sampler, Pitch Play, etc.) per side.
• Faders & EQ: set cross/line curves and reverse; choose isolator/classic EQ and verify full-kill behavior.
• Tempo & pitch: set RP-7 pitch range (±8% / ±16% / ±35%); use pitch reset for instant zero.

6) Soundcheck & Show

• Gain staging: set channel gains to healthy peaks without clipping; adjust booth independently from master.
• LED needle light: use the RP-7 lamp for clear groove visibility in low-light booths.
• Changeovers: use ELITE Focus PC switching for seamless handoffs.

Why Choose AVMaxx for This Bundle

We build from verified data and real-world deployment. You get a 45s-focused turntable pair matched to a Serato-ready mixer, plus setup guidance grounded in performance workflows—not guesswork.

• Bundle fitment clarity: RP-7 tonearm/motor design paired with ELITE’s pads, faders, and dual USB for scratch and 45s sets.
• Deployment speed: wiring, DVS input selection, and pad/FX setup outlined for fast gigs and smooth changeovers.
• Logistics-minded: clean cabling and recessed terminals for neat, reliable installations.

Bottom line: a culture-true 7" performance system that cuts precisely, swaps seamlessly, and inspires nightly.