Fly RCF ART 910-A Loudspeakers with Confidence Using the FL-BR ART 910
The RCF FL-BR ART 910 is a purpose-built flying mount bracket designed specifically for
ART 9 Series loudspeakers, including the ART 910-A, ART 910-AX, and
COMPACT A 10. Built from strong steel and finished in
scratch-resistant black paint, it gives installers, integrators, and Chicago DJs a clean, reliable way to hang
their RCF speakers from ceilings or truss while maintaining a discreet visual footprint.
At the core of the system are upper and lower FL-BR plates that interface directly with the factory mounting points
on the ART 910 enclosure. The upper bracket ties into the threaded point above the top handle, while the lower plate fastens over the
existing stand support plate using the supplied hardware. Once attached, the bracket offers adjustable inclination,
allowing you to fine-tune coverage toward the dance floor, seating area, or stage without fighting improvised hardware.
The FL-BR ART 910 keeps safety and practicality front and center. RCF’s design integrates robust brackets and hardware
for secure attachment, while the CE-compliant construction and scratch protection support long-term use in clubs, bars, churches, and
event spaces. Chains, cables, and hooks can be routed from the upper and lower flying points so the system can be suspended according
to rigging standards and venue regulations.
Whether you’re flying a single ART 910-A over a DJ booth, building a left–right distributed system over a bar, or hanging COMPACT A 10
speakers for corporate events, the FL-BR bracket gives you a repeatable, manufacturer-approved way to get ART 9 boxes in the air
without improvising hardware or compromising coverage.
Real-World Applications and Sound Roles
- Permanent ceiling or truss mounting of RCF ART 910-A over club dance floors and live stages.
- Flown COMPACT A 10 systems for corporate AV, hotel ballrooms, and conference centers.
- Distributed speaker hangs along bar perimeters or restaurant seating zones.
- House-of-worship installs where clean sightlines and discreet black hardware matter.
- Chicago mobile DJs and production companies needing repeatable, safe flown configurations with RCF ART 9.
Where the RCF FL-BR ART 910 Flying Bracket Excels
-
Purpose-Built for ART 9 Loudspeakers:
Designed specifically for ART 9 Series cabinets, including ART 910-A, ART 910-AX, and COMPACT A 10, so mounting points align with factory hardware.
-
Strong Steel Construction:
Steel components provide a rigid, durable structure that resists flex and supports reliable flown positioning in demanding venues.
-
Adjustable Inclination for Focused Coverage:
The bracket allows the speaker to be angled to match room geometry, helping you aim energy at the audience instead of ceilings or walls.
-
Scratch-Resistant Black Finish:
Black, scratch-resistant paint keeps the rig looking clean under stage lighting, in clubs, and on camera, even after repeated handling.
-
Streamlined Ceiling and Truss Hanging:
Dedicated upper and lower attachment points make it straightforward to connect chains, cables, and hooks in compliance with rigging practice.
-
Compact, Lightweight Hardware:
At approximately 2.07 kg (4.56 lbs), the bracket adds minimal extra weight while still providing a solid mechanical interface to the speaker.
-
CE-Compliant Design:
Built to meet CE safety expectations, supporting spec sheets and designs where regulatory compliance is part of the approval process.
-
Ideal for Chicago DJs and Installers:
Perfect for Chicago DJ booths, lounges, and multipurpose rooms where flown RCF systems free up floor space and improve sightlines.
Installation-Ready Details for the RCF FL-BR ART 910
Steel Flying Hardware Engineered Around ART 9 Series
The FL-BR ART 910 is not a generic bracket; it is engineered for the mounting geometry of the RCF ART 9 family.
The upper bracket ties directly into the threaded point above the top handle of the ART 910, while the lower plate overlays the stand
socket plate using the supplied screws. This direct approach minimizes additional adapters and preserves the structural intent of the
enclosure design.
Ceiling and Truss Suspension with Defined Pick Points
Once the bracket is secured to the loudspeaker, two upper flying points and a lower point are available for attaching
chains or cables. This three-point configuration supports stable suspension from ceilings or truss structures when used with appropriate
rigging hardware. The layout makes it easier for riggers and installers to manage tilt and load distribution while keeping the rig tidy.
Adjustable Inclination to Match the Room
Adjustable inclination is built into the bracket so the speaker can be aimed where it is needed most. After the angle is set, the
mounting bolts are tightened to lock the position. Installers can align coverage to a dance floor, seated area, or stage lip without
improvising shims or secondary brackets, which helps maintain predictable coverage in both small rooms and larger venues.
Compatible with ART 910-A, ART 910-AX, and COMPACT A 10
Compatibility extends across multiple RCF models, including the ART 910-A professional active speaker,
ART 910-AX professional active Bluetooth speaker, and the COMPACT A 10 two-way professional speaker.
That makes the FL-BR ART 910 a flexible choice for venues and rental houses standardizing on ART 9 and COMPACT A 10 enclosures.
Scratch Protection and Visual Integration
The bracket is finished in black, scratch-resistant paint to match the aesthetic of RCF cabinets and typical rigging
hardware. This finish helps the bracket blend into dark ceilings and truss while providing basic protection from the nicks and scrapes
that come with installation work and mobile deployments.
How to Deploy the RCF FL-BR ART 910 in the Field
Deploying the RCF FL-BR ART 910 begins by securing the flying hardware directly to the ART 910 cabinet. On the top of
the speaker, the insert label covering the threaded point is removed, and the upper FL-BR bracket is placed over the handle region. An
M10 bolt with its washers passes through the bracket and into the threaded insert on top of the enclosure, then is tightened firmly.
On the bottom of the cabinet, the four screws holding the stand support plate are removed. The FL-BR lower plate is positioned over the
stand support plate and re-secured using the screws provided with the bracket. Once both upper and lower plates are installed, the
system is ready to be flown using appropriate chains, cables, and hooks rated for the loudspeaker and bracket combination.
- Confirm that all threaded points and hardware are clean and undamaged before installation.
- Install the upper bracket using the prescribed M10 bolt and washers, tightening to secure the connection.
- Attach the lower FL-BR plate over the stand support plate using the supplied screws.
- Connect chains or cables to the two upper points and single lower point according to the system weight and regulations.
- Verify final angle and orientation before energizing the system for a sound check.
RCF advises that flying operations be performed by qualified personnel who understand rigging practices and applicable regulations.
The supporting structure, attachment hardware, and safety factors must all be evaluated by the installer.
Mount the RCF FL-BR ART 910 once, fly it safely, and keep your ART 9 systems aimed exactly where your audience needs the sound.
Why Choose the RCF FL-BR ART 910 from AVMaxx:
AVMaxx understands how critical safe, predictable flying hardware is for RCF ART 9 systems. The FL-BR ART 910 gives
Chicago DJs, integrators, and production companies a manufacturer-designed path to hang ART 910-A, ART 910-AX, and COMPACT A 10
loudspeakers without improvising hardware or compromising coverage. When you source the bracket through AVMaxx, you get product guidance
tied to real-world DJ booths, clubs, churches, and corporate venues—not just catalog specs.
Our team works with RCF loudspeakers and accessories every day, so we can help match brackets, speakers, and deployment
styles to the realities of your space: ceiling height, truss layout, room shape, and the way your Chicago audiences actually use the
room. Whether you’re flying a pair of ART 910-A over a mobile DJ stage or installing COMPACT A 10 boxes in a multi-room venue, AVMaxx
can help you spec FL-BR brackets that support your vision.
- Guidance informed by real RCF ART 9 and COMPACT A 10 deployments.
- Support for Chicago DJs, rental houses, and installers building flown rigs.
- Inventory and accessory recommendations that keep systems consistent and serviceable.
- Focus on safe rigging practices and compatibility with the official ART 9 accessory ecosystem.
AVMaxx is your partner for RCF flying hardware—field-aware recommendations, dependable support, and builds that help Chicago DJs and event pros perform with confidence.
Frequently Asked Questions — RCF FL-BR ART 910 Flying Mount Bracket
Which RCF speakers are compatible with the FL-BR ART 910 bracket?
The FL-BR ART 910 is designed for use with RCF ART 9 Series cabinets, including the ART 910-A professional active speaker,
the ART 910-AX professional active Bluetooth speaker, and the COMPACT A 10 two-way professional speaker.
Can the FL-BR ART 910 be used for both ceiling and truss mounting?
Yes. The bracket and included plates allow the loudspeaker to be hung from suitable ceilings or truss structures using
appropriate chains, cables, and hooks. The installer must choose rigging hardware that is rated for the system weight and
follow applicable regulations.
Is the FL-BR ART 910 bracket a good choice for DJs and mobile rigs?
The FL-BR ART 910 bracket is well suited for flown DJ and mobile PA setups where RCF ART 910-A or COMPACT A 10 speakers need
to be suspended above a dance floor or stage. It provides a manufacturer-designed flying solution, freeing up floor space and
maintaining clean sightlines in Chicago clubs, lounges, and event rooms.
How should I handle safety and load when flying speakers with the FL-BR ART 910?
All flying operations should be carried out by qualified personnel familiar with rigging practices. The supporting structure,
attachment hardware, and chains or cables must be chosen for the total system weight, and installation should follow RCF’s
ART 9 accessories manual as well as local regulations and venue requirements.
What is included with the RCF FL-BR ART 910 flying bracket?
The FL-BR ART 910 kit centers on the upper and lower flying brackets and the mounting hardware required to attach them to
the ART 910 enclosure. Chains, cables, and hooks are selected by the installer so they can be matched to the system weight
and the rigging standards in use at the venue.
Share your room dimensions, rigging points, and RCF models with AVMaxx, and we’ll help you spec FL-BR ART 910 brackets that keep your flown ART 9 systems safe, clean, and ready for every show.
