The RCF CVR TT 25 II is an official protection cover designed to keep an RCF TT 25-A II looking clean and working reliably through repeated load-ins, pack-downs, and venue turnovers.
Built around a 600D polyester outer fabric on a PVC base and a 190 T taffeta internal fabric on a PVC base, it adds a practical layer between your cabinet and the real world of carts, van packs, stage edges, and storage rooms. Inside, 10 mm foam rubber padding helps buffer routine bumps that can mark up finishes over time.
For working crews and mobile rigs, the cover is designed for fast handling: front and rear zip openings supported by Velcro fasteners let you get to the areas you need without fighting the fabric, while handle holes on the sides keep the carry workflow natural. A white embroidered logo on the front maintains a clean, professional look in club booths, corporate ballrooms, and event photo/video environments.
Real-World Applications and Sound Roles
This cover is not a thin slip-on. The outer layer is 600D polyester on a PVC base for durability in real transport conditions, while the inner lining uses 190 T taffeta fabric on a PVC base to keep contact smooth against the cabinet. The result is a cover built for repetition: on/off cycles, van packs, and storage moves that happen every week.
The 10 mm foam rubber layer is the difference between “covered” and “protected.” It helps buffer the light impacts that typically show up as scuffs, edge wear, and finish damage over time, especially when your TT 25-A II is in and out of vehicles, carts, and crowded load-in paths.
The closure system is built around front and rear zip openings with Velcro fasteners for practical access. Add the side handle holes, and you get a cover that supports real workflow: moving the speaker confidently, then opening only what you need as your setup changes from venue to venue.
If you are building a consistent TT-series rig, the CVR TT 25 II keeps the look uniform with a white embroidered front logo and is listed as compatible with the RCF TT 25-A II. For reference, the provided identifiers are Part Number 13360326 and EAN 8024530013431.
Use the CVR TT 25 II as part of your repeatable load-in process: cover the TT 25-A II for transport and storage, keep the cabinet protected while staging gear, and use the zipper openings to access the areas you need without removing the entire cover every time your workflow changes.
Treat the cover as part of the rig: faster handling, cleaner cabinets, and fewer cosmetic issues after high-frequency Chicago gig cycles.
When you are investing in a premium speaker like the RCF TT 25-A II, protecting it with the correct model-matched cover keeps your system presentation sharp and your long-term value higher. AVMaxx helps you avoid “close enough” accessory choices by confirming fit, compatibility, and field practicality so your rig stays consistent from warehouse prep to venue teardown.
For Chicago DJs, event production teams, and venue techs who run tight timelines, this cover supports a cleaner workflow: protect the cabinet during staging, keep your look professional on-site, and reduce the day-to-day wear that adds up across a busy calendar.
AVMaxx is your partner for RCF systems—field-aware pairing support and deployment-minded guidance that helps Chicago DJs and event pros keep rigs clean, consistent, and ready.
It is listed as compatible with the RCF TT 25-A II active high output two-way speaker.
It includes 10 mm foam rubber padding to help buffer routine bumps during transport and storage.
The outer fabric is 600D polyester on a PVC base, and the internal fabric is 190 T taffeta fabric on a PVC base.
Keep it on during transport, staging, and any time the cabinet could get bumped or scuffed. Use the front and rear zip openings with Velcro fasteners when you need access without fully removing the cover during fast venue turns.
Match the model name CVR TT 25 II and verify identifiers: Part Number 13360326 and EAN 8024530013431.
Tell AVMaxx how you deploy your TT 25-A II (mobile DJ, club, corporate, or install) and we will help you lock in the cleanest protection and transport workflow.
Select a row below to filter reviews.
5.0
Official English spec sheet for the RCF CVR TT 25 II, covering materials, padding, closure design, compliance, shipping data, and TT 25-A II compatibility.
Spanish-language spec sheet for the CVR TT 25 II, useful for Spanish-speaking crews, venues, and documentation workflows.
All downloads are pulled directly from RCF to ensure verified specifications and the most current deployment details for the RCF CVR TT 25 II protection cover.
The RCF CVR TT 25 II is a protection cover listed as compatible with the RCF TT 25-A II active high output two-way speaker, built to keep cabinets cleaner through transport, storage, and repeated event cycles.
Every material and measurement here is sourced from RCF manufacturer data provided for the CVR TT 25 II—no estimates.
A model-matched cover helps Chicago DJs and event teams keep TT 25-A II cabinets clean and presentable through frequent load-ins, carts, and van packs.
(1) RCF CVR TT 25 II: Protection cover for the RCF TT 25-A II.
Each included item is provided to support straightforward protection and handling from day one.
If you are building a TT 25-A II rig for mobile DJ work, a correct model-matched cover helps keep your system looking pro across Chicago venue cycles.
