The RCF ART 735-A MK5 is an active two-way loudspeaker engineered for wide rooms and high-energy dance floors. A pure titanium 3.0" compression driver couples to a constant-directivity 90° x 60° horn for articulate, far-reaching vocals, while a high-power 15" woofer delivers tight, punchy lows. The system reaches 132 dB Max SPL and spans a 45 Hz – 20 kHz response for full-range program material.
A 1400 W peak Class-D amplifier and onboard DSP manage crossover, equalisation, phase control, soft limiting, and protections, keeping mixes clean at show volume. Engage XBoost on the rear panel when running full-range to enhance perceived low frequencies; FiRPHASE processing maintains time-coherent imaging so music stays open and natural across the audience.
The polypropylene composite cabinet resists vibration and travel wear. Steel grille protection, dual side handles with a top carry, a 35 mm pole mount, and M10 points support flexible deployment, including wedge monitoring when needed.
The neodymium compression driver uses a pure titanium diaphragm with a 3.0" voice coil and an 800 Hz crossover point for fast transient response and superior vocal intelligibility at show volume.
A high-power 15" transducer with a 3.0" voice coil delivers punch and control down low while keeping mid-bass reproduction accurate and transparent.
The 1400 W peak Class-D amplifier offers high efficiency and strong transient response. DSP-controlled limiting with Thermal and RMS protections maintains reliability through long sets.
Proprietary FiRPHASE processing supports time-coherent playback so mixes feel open and natural, while the constant-directivity horn keeps tone balanced across the room.
The polypropylene composite enclosure minimizes vibration at high SPL. Steel grille, 35 mm pole mount, M10 points, and top/side handles support safe, flexible deployment on stands, over subs, or as wedges.
Position mains on 35 mm stands or sub poles with horns at or just above audience ear height. Aim slightly inward for dance floors; maintain clear sightlines. For wedge duty, place the cabinet on its monitor side and start in Flat mode for maximum gain-before-feedback; add XBoost sparingly if fuller playback is needed without subs. When flying or installing, use the integrated M10 points with rated hardware and follow local codes.
Keep limiter activity brief, aim coverage where people stand, and let FiRPHASE preserve clarity across the room.
AVMaxx focuses on performance-driven DJ and event systems. We know how the ART 735-A MK5 behaves in Chicago ballrooms, clubs, and mobile rigs, and we tailor placement, gain staging, and companion gear so you get reliable, high-impact results night after night.
AVMaxx is your partner for RCF solutions—field-aware recommendations, dependable support, and builds that help Chicago DJs and event pros perform with confidence.
ART 735-A MK5 reaches 132 dB Max SPL with a constant-directivity 90° (H) x 60° (V) horn for even room coverage.
A 3.0" titanium compression driver and a 15" woofer (3.0" voice coil) with a DSP crossover at 800 Hz provide clarity and punch.
Use XBoost to enhance perceived bass for full-range shows without subs or at lower background levels. Leave Flat when using subwoofers.
The amplifier is 1400 W peak (1000 W LF / 400 W HF) with DSP soft limiting plus Thermal and RMS protections to maintain reliability.
Contents can vary by region. AVMaxx will confirm official inclusions at checkout and reference current RCF documentation before fulfillment.
Share your room size and music style—we’ll pair the ART 735-A MK5 with the right stands, subs, and settings for maximum impact.
Select a row below to filter reviews.
5.0
Owner’s manual EN/IT/FR/DE/ES: safety, product description, rear-panel controls, connections, installation options, troubleshooting, and dimensions.
Official specifications: 132 dB Max SPL, 1400 W peak, 90° x 60° horn, 15" woofer, 3" titanium compression driver, 800 Hz DSP crossover, I/O, and physical data.
All downloads are pulled directly from RCF to ensure accurate specs and up-to-date deployment details.
All features and specifications are pulled directly from current RCF documentation for ART 7 MK5—no estimates or assumptions.
The VDE/IEC mains inlet and fanless convection cooling support safe, quiet operation in clubs, ballrooms, and mobile DJ rigs.
All specifications are pulled directly from current RCF materials for ART 7 MK5—no estimates, no assumptions.
(1) RCF ART 735-A MK5 active two-way loudspeaker.
Each component is designed to support full deployment and ease-of-use from day one.
Confirm regional inclusions at purchase; the standard VDE/IEC mains inlet ensures straightforward power connection across venues.
