The QSC CP12 is a multipurpose loudspeaker suitable for portable or installed live-sound applications. Whether carting the speaker to gigs or installing it on stage as a vocal monitor, you'll find the monitor exhibits a powerful sound.
The monitor gives you the ability to mix up a mic/line input, a line input, and a music playback device, supplying a total of three inputs. Thus, the CP12 can function as your sole PA if you're an acoustic singer/songwriter playing anything from intimate clubs to menu-venue gigs. However, put the monitor on a speaker pole or yoke it to the ceiling, and you'll have secured a dependable element in your club's permanent PA system.
The QSC CP12 is capable of handling up to 1000W peak thanks to its Class-D amplifier, doing so through its 12" cone LF transducer and 1.4" HF compression driver. You can reach SPL values of up to 126 dB, and the construction of the monitors ensures an even frequency response from 49 Hz to 20 kHz.
The rear panel offers controls sure to be useful to your practice, whether it's the one-touch 25 dB Mic Boost switch on input B, or the contour selector switch; the latter tailors the speaker's response to better suit common scenarios such as dance floor, speech address system, and floor monitor. These contours are made possible by the DSP system programmed into the device.
Finally, the unit is relatively compact and portable. It measures 20.3 x 13.8 x 12.7", and weighs 30.3 lb, making it easier to handle than many conventional live-sound monitors or instrument amplifiers.
The Turbosound iQ15B is a 3,000 Watt (peak) powered front loaded subwoofer with digital networking designed for a wide range of portable PA and fixed installation applications. It consists of a high excursion 15" low frequency driver with 4" voice coil and double suspension.
As with all Turbosound powered loudspeakers, the iQ15B features a very efficient and lightweight two channel Klark Teknik Class-D power amplifier which provides 3,000 Watts of peak power. A high degree of control over the loudspeaker system's performance is provided by the highly sophisticated Klark Teknik Digital Signal Processing which offers dynamic EQ for impressive full range response at low volume levels, and transparent limiting to ensure the utmost clarity at high output levels, and the assurance of long term reliability. Highly advanced DSP speaker modeling includes accurate models of industry standard speakers.
The loudspeaker's rear panel amplifier module carries a fully featured user interface consisting of an LCD display providing intuitive access to level, EQ, and pre-set frequency contours that optimise response for FOH or floor monitor use, and provides USB remote control and access to the onboard DSP via Windows or Mac Computer. Two independent channels are provided with balanced combo TRS/XLR inputs and balanced filtered XLR outputs, allowing stereo satellite speakers to be configured with only one subwoofer, and the input gain control with signal and peak LEDs provides adjustment of the sub-bass level. The iQ15B is equipped with proprietary ULTRANET technology, using CAT5 cables to transmit pristine quality multi-channel audio signals and other information between ULTRANET enabled products such as digital mixers and personal monitor systems.
Mains power is connected via a locking Neutrik powerCON connector with additional auxilliary mains output to power further iQ series loudspeakers. The iQ15B is fitted with a pole mount socket for supporting satellite speakers and heavy duty wheels are provided for easy transportation. The birch plywood enclosure is fitted with a rugged powder coated perforated steel mesh grille and is finished in hard wearing semi matte black paint finish.
Select a row below to filter reviews.
5.0
