ProX XTP-GSBPACK3PRO Stage Tower with 3 mm Ladder Truss

ProX XTP-GSBPACK3PRO: PRO Ladder-Truss Tower Package for Large-Scale Lifts

Build a climbable, outrigger-stabilized tower leg with pro-grade hardware. The ProX XTP-GSBPACK3PRO combines a wheeled ground-support base, 4-way sleeve block, hinge set, rigging top, outriggers, and a 3.28 ft ladder truss segment with 3 mm wall. Designed to support the building and flying of large-scale truss for mid to heavy-grade stage installations, this package provides everything needed for one tower leg—lift hoist not included.

Ladder-truss advantage. The included XT-SQPL328 segment follows F34 geometry (12 in / 290 mm) with 3 mm wall and integrated ladder steps (2 in / 50 mm; spacing 9.84 in / 250 mm) for climb-friendly corners. ProX XT-SQPL series uses EN-AWT6 6082 aluminum and TUV-certified welding, with industry-standard conical compatibility across many F31/F32/F34 systems.

• Real-world roles: festival roof legs, LED wall support towers, club and touring headers, and exhibition builds where ladder steps and quick coupling matter.

Where the XTP-GSBPACK3PRO Leads

• Complete tower leg: Base, sleeve block, hinge set, rigging top, outriggers, and 3.28 ft ladder truss (3 mm wall) streamline procurement and assembly.
• Ladder-truss workflow: 3 mm wall tubing with integrated 2 in steps and 9.84 in spacing supports climb-friendly access at corners.
• F34 geometry: 12 in (290 mm) format integrates with common conical-coupled inventories for expansion and rental compatibility.
• Certified build: EN-AWT6 6082 aluminum with TUV-certified aluminum welding supports reliability for show and install work.
• Rig-ready details: Tapered shear pins with clips and standard conical interfaces accelerate pin-up and checks.
• DJ and production friendly: A strong fit for Chicago DJ staging, touring headers, and expo towers needing fast, repeatable setup.

Rigging Interfaces for the ProX XTP-GSBPACK3PRO

• Sleeve block: XT-BLOCK-MK2 4-way junction style, rides on the vertical to carry the working truss during lift/lower.
• Hinge set: XT-HINGEX4 (pack of 4) for controlled tilt-up/tilt-down of the working truss during raise procedures.
• Top section: XT-TOPCM truss top with I-beam mount and chain pulley wheels for attaching a compatible hoist interface.
• Base and outriggers: XT-GSBMK3 wheeled ground-support base with leveling jacks; XT-GSOUTS3 single 3 ft outrigger braces (4) with clamps.
• Truss segment: XT-SQPL328 ladder truss, 3.28 ft, F34 geometry, 3 mm wall, steps 2 in (spacing 9.84 in).
• Note: Lift hoist is not included. Always consult an engineer for complex designs.

Ladder-Truss Engineering

XT-SQPL series ladder truss uses EN-AWT6 6082 aluminum with 3 mm wall main tubes (2 in / 50 mm) and 0.75 in / 20 mm braces. Ladder steps are 2 in / 50 mm with 9.84 in / 250 mm spacing to aid climb access at corners where allowed by your safety plan.

Compatibility and Connectors

Industry-standard F34 (290 mm) geometry with conical couplers supports connection to many F31/F32/F34 components. Package includes tapered shear pins with clips and is compatible with most conical-coupled trussing built to standard dimensions.

Package Anatomy

• XT-GSBMK3: Universal vertical tower truss ground-support base on wheels with leveling jacks.
• XT-GSOUTS3 (4): Single 3 ft outrigger support braces with clamps.
• XT-BLOCK-MK2: Ground-support sleeve block for F34 truss systems (4-way junction).
• XT-HINGEX4: Pack of four hinge blocks (male-to-male).
• XT-TOPCM: Truss top with I-beam mount and chain pulley wheels.
• XT-SQPL328: 3.28 ft (1 m) F34 professional ladder truss segment, 3 mm wall.

Dimensions and Weight Highlights

• XT-SQPL328 (1): 11.50" H x 11.50" W x 39.36" L; 23.00 lb (exterior).
• XT-GSOUTS3 (4): 64.00" H x 2.00" W x 37.50" L; 29.00 lb (exterior).
• XT-BLOCK-MK2 (1): 18.50" H x 22.50" W x 22.50" L; 77.30 lb (exterior).
• XT-TOPCM (1): 11.50" H x 9.50" W x 24.00" L; 26.40 lb (exterior).

Freight and Cartons

• Box 1: XT-SQPL328 13.00" x 13.00" x 40.00"; 25.00 lb
• Box 2: XT-GSOUTS3 (4 boxes) 6.00" x 8.00" x 64.00"; 34.00 lb
• Box 3: XT-GSBMK3 9.00" x 29.00" x 29.00"; 70.00 lb
• Box 4: XT-HINGEX4 5.00" x 5.00" x 5.00"; 10.00 lb
• Box 5: XT-BLOCK-MK2 20.00" x 24.00" x 24.00"; 80.00 lb
• Box 6: XT-TOPCM 12.00" x 10.00" x 25.00"; 28.00 lb
• Suggested shipping: LTL
• Palletized (1 set): 290 lb, 48" x 40" x 60"
• Palletized (2 sets): 510 lb, 48" x 40" x 60"
• UPC: 019372413622

How to Deploy the ProX XTP-GSBPACK3PRO

1. Stage the base: Position XT-GSBMK3, extend leveling jacks, and attach XT-GSOUTS3 outriggers with clamps.
2. Assemble the vertical: Connect XT-SQPL328 ladder truss segment to the base per conical-coupler practice; pin and clip.
3. Install the sleeve block: Mount XT-BLOCK-MK2 on the vertical; verify free, smooth travel.
4. Add hinge set: Fit XT-HINGEX4 to enable a controlled tilt-up workflow for your working truss.
5. Mount the top: Install XT-TOPCM with I-beam and pulley wheels; prepare your hoist interface. Hoist not included.
6. Rig the working truss/load: Attach the header/working truss to the sleeve block; distribute fixtures and apply safety bonds.
7. Tilt, lift, verify: Conduct a controlled tilt-up and lift; pause to re-check pins, leveling, and outrigger clamps.
8. Engineering review: For complex designs, consult a qualified engineer and follow current manufacturer guidance.

Why Choose AVMaxx for XTP-GSBPACK3PRO

• Ladder-truss expertise: We configure climb-friendly F34 legs with parts that match your rigging plan and venue rules.
• Exact data only: All details above reflect the current ProX information you provided—no assumptions.
• Chicago show support: Quick guidance on LTL, floor plans, and accessory matching for DJ and festival builds.
• Parts matched to your plan: We align hinges, sleeve blocks, tops, and ladder segments to your trim and payload goals.