ProX XT-TC5LEDPA LED Panel Mounting Plate, 10–13" Extension

ProX XT-TC5LEDPA: 10–13" LED Wall Plate with 2" Clamp for Truss or Ground Stacking

The ProX XT-TC5LEDPA is a telescoping LED wall mounting plate with an extension 2" pole truss clamp built for ground stacking on XT-GSWSB bases or for hanging from truss. It starts at a 10" offset and extends to 13", giving techs the clearance they need to position panels cleanly. A multi-directional linking plate lets you mount two to four panels per plate (panel count depends on panel dimensions), while eight CNC-slotted long mounting holes fit M8, M10, and M12 bolts for flexible layouts. The clamp is compatible with F32, F33, F34, and 12" bolt truss segments, and panels can be oriented vertically or horizontally.

Compact and lightweight at 2.50 lbs (15.00" × 5.00" × 5.00"), the XT-TC5LEDPA packs small and integrates directly with XT-GSWSB ground support for quick setups in Chicago ballrooms, clubs, and mobile DJ stages.

Real-World Applications and Roles:

• Ground-stack LED walls on XT-GSWSB with adjustable 10–13" standoff
• Hang LED panels on F32/F33/F34/12" bolt truss for flown configurations
• Mount two to four panels per plate (per panel dimensions)
• Vertical or horizontal panel orientation with M8/M10/M12 hardware

Where the ProX XT-TC5LEDPA Excels

• Flexible Reach: 10" starting offset extends to 13" for clearance around truss and bases.
• Multi-Panel Efficiency: Plate links two to four panels per plate to speed wall builds.
• Broad Truss Compatibility: Works with F32, F33, F34, and 12" bolt truss segments.
• Orientation Options: Mount panels vertically or horizontally without re-rigging.
• Fast Hardware Fit: Eight CNC slots accept M8, M10, and M12 bolts for common panel patterns.
• Ground-Stack Ready: Ideal companion for the XT-GSWSB LED wall ground support.

Telescoping 10–13" Extension for Clean Panel Stand-Off

Start at a 10" offset and extend to 13" to clear truss chords, cabling, or base lips while keeping panels aligned.

Multi-Directional Plate Links Two to Four Panels

Use the linking plate to connect two to four panels per plate, adjusting per your panel dimensions and wall layout.

Eight CNC-Slotted Holes for M8 / M10 / M12

Long slots accept M8, M10, and M12 bolts, supporting a range of panel mounting patterns and spacing needs.

Truss and Ground Support Workflows

Clamp to F32, F33, F34, or 12" bolt truss for flown rigs, or pair with XT-GSWSB T-Bases for stable ground stacks.

Vertical or Horizontal Panel Orientation

Mount panels in either orientation to match content framing, screen aspect goals, or site constraints.

Compact Form Factor for Fast Load-Ins

Exterior size is 15.00" × 5.00" × 5.00" at just 2.50 lbs, packing small for DJ trailers and ballroom load-ins.

How to Deploy the ProX XT-TC5LEDPA

1. Plan the Wall: Confirm panel dimensions and choose two-, three-, or four-panel plate linking per section.
2. Set the Clamp: Attach the 2" clamp to F32/F33/F34/12" bolt truss or to XT-GSWSB ground support positions.
3. Adjust Reach: Set the extension from 10" to 13" to achieve the needed stand-off for cabling and clearance.
4. Mount Panels: Use the eight slotted holes with M8, M10, or M12 bolts; orient panels vertically or horizontally.
5. Link Sections: Continue plate-by-plate, verifying alignment before powering the LED system.
6. Final Check: Verify all hardware is secure and that ground-stack bases or truss are set per site requirements.

Why Choose AVMaxx for ProX XT-TC5LEDPA

• Spec-True Guidance: We use only the details you provide or authorized manufacturer data—no assumptions.
• Chicago & DJ Focused: We build pages and kits that fit mobile DJ, club, and ballroom workflows.
• Workflow-Ready Copy: Clear sections and step-by-steps that help techs deploy faster with fewer surprises.

Frequently Asked Questions — ProX XT-TC5LEDPA

Share your panel model, wall width, and venue layout—we’ll align XT-TC5LEDPA plates with XT-GSWSB spacing for a clean, reliable build.