ProX XT-CRANK18FT-500 — 18' Heavy-Duty Lighting Crank Truss Stand (500 lb Center Load)
System Summary: The ProX XT-CRANK18FT-500 is a heavy-duty crank stand for temporarily mounting lighting and truss for small to medium DJ shows, bands, corporate AV, and club installs. It reaches a maximum height of 18', supports up to 500 lb center load, and integrates outriggers, casters, independently adjustable leg braces, and nylon-guided leg sliders for stability and smooth setup. Includes a T-Adapter truss mount for fast, repeatable deployments in Chicago mobile DJ rigs and permanent venues alike.
Build & Mechanism: All-metal steel/aluminum construction with a smooth, heavy-duty winch eliminates direct lifting and lowering of heavy fixtures. The stand folds to a portable footprint (approx. 24" x 19" base closed) for transport. Base diameter spans 83.85" (˜7 ft) for a wide stance; minimum height is 74". Weight is approx. 230 lb; exterior dimensions listed at 76"H x 20"W x 24"L (240 lb shipping).
Integration & Use-Case Wrap: Pair a second XT-CRANK18FT-500 with a truss and XT-TADAPTER-500 to build a raised lighting bridge up to 18' that supports a combined maximum of 1000 lb (system total across both stands). Ideal for mobile DJs, live bands, rental houses, and house-lighting positions needing fast lift with clear safety practices.
- Real-World Applications & Sound Roles: Mobile DJ lighting trees and bridges; club front-truss lifts; corporate AV lighting spans; live band rig lifts; rental stock where repeatable, safe elevation is required.
Where This Stand Excels
- Small-format mobile DJ rigs: Fast crank-up to 18' with casters for easy repositioning; eliminates direct lifting of heavy fixtures.
- Club installs with tight footprints: 7 ft base diameter stabilizes tall lifts while remaining manageable in crowded rooms.
- Corporate AV & rentals: Folds for transport, repeatable setup with outriggers and leg braces; durable steel/aluminum build.
- Temporary truss bridges: With a second stand and XT-TADAPTER-500, support up to 1000 lb across the span (per provided guidance).
Control Modes for the ProX XT-CRANK18FT-500
Winch Operation: Turn the winch handle clockwise to lift; counter-clockwise to lower. Lock all safety mechanisms (pins/knobs) before use. Loads must be centered and balanced. Install safety chains on each attached item.
Setup & Stabilization: Place on a hard, stable surface, clear of overhead obstacles. Stabilize legs before lifting. When outdoors, secure with braces or cables for wind. Maintain a safety perimeter with a radius 5 ft greater than maximum height during lifting/lowering.
Inspection & Service: Check cables, pulleys, and telescopic masts before each use; replace any damaged cable immediately. A competent person should perform periodic major inspections; annual inspection by an authorized technician is suggested.
Structural Stability & Coverage for Lights
Acoustic? No. This stand is a mechanical lift for lights and truss—built for strength, balance, and steadiness, not sound.
- Safe elevation to 18 ft: Engineered to go up high while resisting side-to-side wobble.
- Wide 7 ft stance + outriggers: A larger footprint controls sway; wider base = less movement at height.
- Nylon-guided leg sliders: Smoother extension with reduced binding or jerky motion during setup.
Why it matters to you
- Steadier fixtures & truss: Keep your lights secure and safe overhead.
- Faster, easier setup: Smooth leg action means fewer hiccups on show day.
- Cleaner aiming & coverage: Less wobble keeps beams exactly where you point them.
Power-Free Lift & Mechanical Advantage
The heavy-duty crank winch eliminates direct lifting and lowering of heavy loads, giving crews controlled, predictable motion both up and down.
- Smooth raise/lower: Turn the winch handle clockwise to lift and counter-clockwise to lower for precise height moves.
- Safety first: Lock all safety mechanisms (pins/knobs) before operation; keep loads centered and balanced on the carriage/T-Adapter.
- Hands-on control: Mechanical advantage reduces operator strain and helps protect fixtures during slow, steady transitions.
- Safe work area: Maintain a safety perimeter with a radius 5 ft beyond maximum height during lifting and lowering.
- Outdoor use: When outside, secure with braces or cables to mitigate wind forces.
- Do not roll when raised: Never move the stand while loaded or in an extended position.
Why it matters to you
- Lower crew fatigue: Crank-assist handling instead of dead-lifting gear.
- Fewer surprises: Controlled motion reduces bumps to sensitive fixtures.
- Repeatable shows: Consistent, safe operation night after night.
Rigging, Transport & Footprint
Built for real-world show logistics, the stand balances a wide, stable stance with a transport-friendly footprint.
- Stable base: Approx. 83.85" (7 ft) base diameter for tall lifts; minimum height 74" for low-ceiling pre-rigging.
- Compact when closed: Base closed approx. 24" × 19" for tighter pack-outs and doorway moves.
- Integrated casters: Roll-in/roll-out convenience in the closed position for quicker strikes.
- Weight & exterior dims: Stand weight approx. 230 lb; exterior 76"H × 20"W × 24"L (listed 240 lb for shipping).
- Shipping plan: Suggested LTL; skid guides—1 pc 48×40×82" 335 lb, 2 pcs 48×40×82" 620 lb, 4 pcs 48×40×82" 1190 lb.
- System builds: Pair with a second XT-CRANK18FT-500 and XT-TADAPTER-500 to create a raised truss bridge up to 18 ft (combined system supports up to 1000 lb across both stands).
Why it matters to you
- Quicker load-ins: Casters and compact closed footprint speed venue access.
- Predictable trucking: Clear dimensions/weights simplify LTL and skid planning.
- Scalable rigs: Add a second stand + truss for larger looks without changing hardware families.
How to Deploy
- Positioning: Set on firm, level ground; verify clear overhead. Extend and brace legs fully before loading.
- Loading: Center and balance the payload on the lifting carriage/T-Adapter. Use safety chains on all attached items.
- Cranking: Lift with clockwise winch turns; lower counter-clockwise. Keep a safety perimeter 5 ft beyond max height.
- Outdoor Use: Add braces or guy cables to mitigate wind. Do not move the stand while loaded or extended.
- System Builds: For a raised truss bridge, use two XT-CRANK18FT-500 stands with XT-TADAPTER-500 and appropriate truss; combined system supports up to 1000 lb per provided guidance.
- Post-Show: Fully close sections, lock the lifting carriage, and secure for transport.
Why Choose AVMaxx
We work from verified, manufacturer-provided data only, tailoring lifts for Chicago DJs, clubs, and touring crews. You get real-world deployment advice, fast support, and spec-accurate builds that keep your shows safe and efficient.
Frequently Asked Questions — ProX XT-CRANK18FT-500
What is the maximum height and load rating?
Maximum height is 18 ft. Center-load rating is 500 lb per stand as provided. For a two-stand truss system with XT-TADAPTER-500, the combined maximum supported weight is 1000 lb (across both stands).
Is a T-Adapter included?
Yes. The package includes a T-Adapter truss mount per the provided description.
Can I move the stand while it’s loaded?
No. Do not attempt to move the stand when loaded or in any extended position.
What surface and stabilization do I need?
Use on a hard, stable surface. Fully stabilize legs before lifting. Outdoors, secure with braces or cables to account for wind.
What inspections are recommended?
Inspect rigging hardware, cables, pulleys, and telescopic masts before each use. Replace any damaged cable immediately. Periodic major inspections by a competent person are recommended; annual inspection by an authorized technician is suggested.
What are the key dimensions and shipping notes?
Base diameter ˜ 83.85" (7 ft); base closed approx. 24" x 19"; minimum height 74"; stand weight approx. 230 lb. Exterior dimensions listed at 76"H x 20"W x 24"L (240 lb). Suggested shipping method: LTL. Skid guides: 1 pc 48x40x82" 335 lb; 2 pcs 48x40x82" 620 lb; 4 pcs 48x40x82" 1190 lb.
Tell us your venue specs or DJ use-case, and we’ll configure a safe, efficient lift plan with verified ProX components.
