Modular Line-Array & Sub Protection for Fast Turns — ProX XS-SP322127W
The ProX XS-SP322127W is a universal ATA flight case engineered to move either a stack of compact line-array modules or a single powered sub in the 32" H × 27" W × 21" L class. A rigid 3/8" laminated plywood shell with the signature Honeycomb Digital™ surface surrounds an impact-resistant, foam-lined interior. Recessed spring-loaded rubber handles and twist-locking butterfly latches keep the lid locked through ramps and elevators, while four 4" steel casters (two locking) make dock-to-ballroom pushes effortless.
Built with CNC precision and reinforced dual-anchor rivets, this case is designed for AV production teams, touring acts, and Chicago mobile DJs standardizing on RCF HDL6A/HDL26A arrays, QSC KS118/LS118, and similar footprints. The road-ready form factor supports clean truck packs and repeatable load-ins night after night.
Real-World Applications and Sound Roles
- Move six compact line-array modules or a single sub safely between venues.
- Standardize rental inventory with consistent stacking and labeling.
- Mobile DJ rigs needing quick ballroom flips and long hotel corridor runs.
Where the ProX XS-SP322127W Excels
- Universal Fit Class: Interior 32" × 27" × 21" targets six HDL6A/HDL26A, three VTX A8, or single subs like KS118/LS118 (verify dimensions).
- Road-Ready Shell: 3/8" laminated plywood with Honeycomb Digital™ surface resists dings and daily wear.
- Impact Control: Foam-lined interior protects corners, grills, and finish in transit.
- Secure Hardware: Twist-locking recessed butterfly latches; reinforced dual-anchor rivets.
- Mobility: Four 4" casters (2 locking) plus recessed handles for stable rolling and lifting.
- Truck-Pack Friendly: Clean exterior with corner protection supports reliable stacking.
- Chicago DJ Ready: Optimized for quick dock-to-dancefloor logistics and camera-clean presentation.
CNC-Cut Consistency Since 1984
Panel cuts, angles, and hardware locations are CNC-manufactured to tight tolerances, so lids align, latches land square, and fleets stay uniform across builds.
Honeycomb Digital™ Surface — Tough, Professional Finish
The hex-pattern laminate helps hide scuffs and minor scratches while maintaining a clean, pro look on stage, in ballrooms, and on social media close-ups.
Smarter Foam with a Smaller Footprint
High-density rubber/foam padding contains approximately 70% recycled content, balancing real-world protection with reduced environmental impact.
Mobility & Handling You Can Trust
Recessed spring-loaded handles, heavy-duty steel ball corners, and 4" casters (two locking) streamline venue turns while safeguarding cabinet finish.
How to Deploy ProX XS-SP322127W in the Field
- Measure, Then Load: Confirm your array or sub dimensions against the interior 32" H × 27" W × 21" L.
- Line-Array Mode: Stack modules evenly; add protective separation where needed; check lid clearance before latching.
- Single-Sub Mode: Center the cabinet to keep weight over the casters; ensure grille and corners are foam-supported.
- Roll & Secure: Engage all latches; use the two locking casters on ramps, elevators, and in trucks.
- Strike: Wipe the Honeycomb surface, inspect contact points, and relock for the next run.
Measure, lock, roll—arrays and subs travel protected and truck-ready in minutes.
Why Choose the ProX XS-SP322127W from AVMaxx
We help Chicago DJs and production teams spec cases that survive real routes—dock lips, hotel hallways, and quick ballroom flips—while protecting investment-grade arrays and subs. Tell us your exact models and we’ll confirm fit and pack strategy for your schedule.
AVMaxx is your partner for ProX solutions—field-aware recommendations, dependable support, and builds that help Chicago DJs and event pros perform with confidence.
Compatible Speakers — Line-Array or Single Sub (Holds One Stack or One Sub)
| RCF |
QSC |
JBL |
EAW |
dB Technologies |
|
H×W×L Fits (interior): 32.00" × 27.00" × 21.00"
|
- (6) HDL6-A
- (6) HDL 26-A
- (2) TTL 33-A II
|
- (1) KS118
- (1) LS118 — 25.00" H × 21.00" W × 31.00" L (caster base sits in the case)
|
|
|
- (2) VIO L1610
- (2) VIO L210
|
Always confirm cabinet dimensions and hardware against the case’s interior 32" × 27" × 21" before purchase.
Frequently Asked Questions — ProX XS-SP322127W
What are the interior and exterior dimensions?
Interior: 32.00" H × 27.00" W × 21.00" L. Exterior with casters: 36.00" H × 22.50" W × 33.50" L. Approx. weight: 80 lb.
Which speakers fit?
Line-array: (6) RCF HDL6A or HDL 26-A; (3) JBL VTX A8; (2) EAW NTX210L or RSX212L; (2) dB Technologies VIO L1610 or VIO L210. Single subs: (1) QSC KS118 or LS118 (note LS118 caster base).
What materials and hardware are used?
3/8" laminated plywood with Honeycomb Digital™ finish, foam lining, recessed handles and latches, heavy-duty steel ball corners, and four 4" casters (two locking).
Is it suitable for Chicago DJ load-ins?
Yes. The mobility package and clean exterior support fast ballroom flips, club changeovers, and long hallway runs.
What’s the shipping profile?
Carton: 32.00" H × 24.00" W × 35.00" L; shipping weight about 85 lb. Suggested method: LTL.
Need a fit check or pack plan for your exact array or sub? Share model and route—we’ll confirm and recommend field-smart add-ons.
