ProX XS-PARU612W: The Fast-Load Lighting Trunk Built for Real Tours
Roll in, configure, and protect—without slowing the show. The ProX XS-PARU612W is a tour-grade utility case engineered for PAR-style fixtures, small moving heads, and lighting accessories. A 24" × 36" × 15" full interior (including lid) pairs with movable/removable dividers so you can run 6 large bays at 12" × 12" or 12 slim bays at 12" × 5.5". Durable 4" casters (2 locking), recessed spring-action handles, and stack-friendly wheel pockets speed up venue turnovers from dock to ballroom.
The shell features 3/8" Signature Series plywood wrapped in the distinctive Honeycomb Digital™ laminate to help resist minor-to-moderate scuffs. Steel ball corners, dual-anchor rivets, and butterfly twist-lock latches complete an ATA-300 style build ready for nightly transport.
Real-World Applications and Sound Roles:
- Mobile DJ uplight trunks (weddings, corporate)
- Club installs needing organized PAR storage
- Production houses shuttling small movers and cables
- Rental prep and festival changeovers where speed matters
Where the ProX XS-PARU612W Excels
- Fast Load-Ins: 4" wheels, recessed handles, and wheel pockets streamline dock-to-stage moves for weddings, clubs, and corporate AV.
- Configurable Capacity: Set up 6 × 12" × 12" large bays or 12 × 12" × 5.5" slim bays with included dividers; center planks remain fixed for rigidity.
- Road-Ready Build: ATA-300 style, 3/8" Signature Series plywood, steel ball corners, and dual-anchor rivets handle daily transport.
- Scratch-Resistant Shell: Honeycomb Digital™ laminate helps reduce visible scuffs, keeping cases camera-ready under uplights.
- Secure Closure: Industrial butterfly twist-lock latches and tongue-and-groove alignment for tight, rattle-free travel.
- Spacious Interior: Full interior 24" W × 36" L × 15" H (including lid); interior height 13" (excluding lid) for fixture clearance.
- Stack-Safe Footprint: Wheel pockets support stacking stability across trucks or prep floors.
- Eco-Smart Foam: High-density foam uses 85% recycled content to cushion gear and reduce waste.
- Built for Chicago DJs: Optimized for fast ballroom turnovers, club takeovers, and tight dock schedules.
Configurable Grid for PARs & Compact Movers
Dial the layout to your rig. The divider set lets you choose 6 large 12" × 12" cells for can-style uplights or 12 slim 12" × 5.5" cells for compact LEDs. Need a hybrid? Mix widths to stage cables, clamps, and power drops without creating a second trunk.
Honeycomb Digital™ Armor That Hides the Miles
The hex-pattern laminate helps mask day-to-day rubs and minor scratches, preserving a professional look on gigs and in client-facing venues. Inspired by heavy-duty urban hardware, it’s a practical finish for cases that see real pavement.
Hardware That Survives the Tour
Steel ball corners, industrial butterfly latches, and dual-anchor rivets keep the shell square and the lid sealed. The tongue-and-groove fit reduces rattle and helps keep dust at bay between shows.
Dimensions That Fit Real Vehicles
With casters, the case measures 23.00" H × 27.50" W × 40.50" L at 95 lb, balancing van-pack efficiency with usable interior volume. The full top lid (2.75") and dishcups (0.75") provide additional clearance for taller fixtures.
Smarter Materials, Lighter Footprint
High-density foam is made from 85% recycled materials. ProX’s process leverages recycled plastic content to protect your investment while cutting waste in the supply chain.
How to Deploy the ProX XS-PARU612W in the Field
Plan the grid: Choose 6 large or 12 slim cells based on fixture size. Keep center planks in place for strength and adjust dividers around your kit.
Stage by circuit: Group pars by DMX universe, color role, or zone so the first six pulls land exactly where your tech needs them.
Label everything: Mark cell positions (A1–A6 / B1–B6) to cut strike time and prevent crossed returns.
Load for balance: Heavier fixtures toward the wheel side; lock two casters when parked on ramps or risers.
Stack & roll: Use wheel pockets for stable stacking in trucks or warehouse rows; align tongues and latches before moving.
Protect the finish: Close the full lid and verify latch engagement before transport; avoid resting sharp clamps against laminate.
Pack once, roll once—hit the dock with a case layout that mirrors your show flow.
Why Choose the ProX XS-PARU612W from AVMaxx
We build for real gigs, not spec sheets. Our team understands how DJs and lighting techs work rooms—tight ballrooms, quick flips, club booths with no storage. We match case layouts to your fixture mix and advise on labeling, cell sizing, and truck-pack strategy so your gear survives the calendar.
AVMaxx is your partner for ProX solutions—field-aware recommendations, dependable support, and builds that help Chicago DJs and event pros perform with confidence.
Frequently Asked Questions — ProX XS-PARU612W
How many PAR lights can the XS-PARU612W hold?
Configure up to 6 large 12" × 12" bays or 12 slim 12" × 5.5" bays using the included removable dividers.
Are the dividers removable?
Yes. Dividers are movable/removable to fit your fixtures. Center planks are non-removable for structural strength.
Do the wheels lock for ramps and ballrooms?
Yes. The case includes 4" wheels with two locking casters to stabilize during load-in and setup.
Can it store small moving heads or just PARs?
It can be used for PAR-style lights, small moving heads, and related storage; set divider widths to match fixture footprints.
What’s included with the XS-PARU612W?
ProX XS-PARU612W case with divider system (center planks fixed). Refer to the product’s official contents for any updates or specific inclusions.
Tell us your fixture mix and venue workflow—we’ll help you lock in the ideal cell layout and get your rig rolling efficiently.
