Universal 12-Inch Mixer Protection, Blacked-Out and Road-Ready: ProX XS-M12BL
Arrive set, leave fast. The ProX XS-M12BL is a black-on-black flight case purpose-built for 12-inch large-format DJ mixers. A rugged Gig-Ready™ 3/8" plywood shell teams up with steel ball corners, recessed spring-action handles, and industrial butterfly twist-lock latches to secure your mixer from van to venue.
Inside, high-density foam supports the chassis; outside, the signature Honeycomb Digital™ laminate stays camera-clean and helps resist minor scuffs during daily transport. A removable front panel opens quick access to front controls and headphone/mic jacks, while rear/under-deck space keeps cables and small accessories organized for quick turnovers.
Built for busy calendars. CNC manufacturing keeps tolerances tight, and industrial rubber feet stabilize the case on risers and stages. For Chicago mobile DJs, club takeovers, and corporate AV crews, the XS-M12BL balances protection, presentation, and speed.
Real-World Applications and Roles
- Mobile DJ rigs needing fast access to front I/O and clean cable routing
- Club installs with guest DJ rotation and quick booth resets
- Weddings/corporate events where a black-on-black, pro look matters
Where the ProX XS-M12BL Excels
- Fast Load-Ins: Recessed spring handles and efficient layout streamline club and ballroom turnovers.
- Universal 12" Fit: Designed for large-format 12-inch mixers used by Allen & Heath Xone and other brands.
- Road-Ready Build: Gig-Ready™ 3/8" plywood, steel ball corners, and dual-anchor rivets add touring toughness.
- Clean Presentation: Black-on-black Honeycomb Digital™ laminate looks sharp under uplights and on camera.
- Smart Access: Removable front panel exposes front controls and headphone/mic jacks instantly.
- Cable Management: Rear/under-deck area and cable access hole (with removable emblem cover) keep runs tidy.
- Secure Closure: Industrial recessed butterfly twist latches accept padlocks for extra security.
- Stable Footing: Industrial-grade rubber feet help the case stay put on stages and risers.
- Built for Chicago DJs: Optimized for quick room flips, club takeovers, and mobile setups.
Blacked-Out Honeycomb Digital™ Exterior
The signature hex-grid laminate delivers a sleek, all-black look while helping minimize visible surface wear from daily use. It pairs well with booth aesthetics and uplighting for weddings and corporate shows.
Gig-Ready™ Chassis & Hardware
Constructed from 3/8" Gig-Ready™ plywood with steel ball corners, dual-anchor rivets, and industrial butterfly latches, the shell is built to handle transport bumps and tight van packs without losing alignment.
Access Where It Matters
The removable front panel provides immediate reach to front-edge controls and headphone/mic connections. A cable access hole (with removable emblem cover) routes power and audio cleanly to the rear compartment.
Interior Support & Organization
High-density foam supports the mixer and helps absorb minor shocks. Additional space in back and underneath the unit stores cables and small accessories so your booth stays uncluttered.
CNC Consistency Since 1984
ProX uses CNC technology to maintain strict tolerances for panel fit and hardware placement, reflecting decades of case-building experience.
Materials with a Mission
ProX prioritizes sustainability—durable hard rubber foams contain 70% recycled content sourced from post-consumer and post-industrial materials.
Confirmed 12-Inch Compatibility — Pioneer Flagship & Legacy Mixers
The XS-M12BL supports large-format 12-inch layouts and holds the following Pioneer models with a secure foam fit while preserving front-panel access and clean cable routing:
- DJM-900NXS2 / DJM-900NXS / DJM-900SRT: Firm seating against high-density foam; removable front panel keeps cue, mic, and utility controls within reach.
- DJS-1000: Performance sampler fits the 12-inch footprint; route power and audio through the cable port to the rear compartment.
- DJM-850 / DJM-750: Club-standard chassis protected by Honeycomb Digital™ laminate and stabilized by industrial rubber feet.
- DJM-800 / DJM-700 / DJM-600: Legacy 12-inch frames cradled by foam support; twist-lock latches secure the lid for transport.
Set, route, secure—fast booth turnovers without compromising protection or access.
How to Deploy the ProX XS-M12BL in the Field
- Set the case on a stable surface; release the recessed butterfly latches and lift the lid.
- Remove the front panel to expose the mixer's front controls and headphone/mic jacks.
- Route power and audio through the cable access hole; stow slack in the rear/under-deck space.
- Verify the mixer's snug fit against the high-density foam before power-up.
- After the show, coil cables into the accessory space, reinstall the front panel, and latch securely for transport.
Open, connect, perform—then pack clean and roll to the next room.
Why Choose the ProX XS-M12BL from AVMaxx
AVMaxx equips Chicago DJs and event teams with field-proven case setups—clean cable routing, quick front-panel access, and protection that keeps 12-inch mixers show-ready. We align your booth workflow with the right ProX solution so you move faster and look sharper on every gig.
AVMaxx is your partner for ProX solutions—field-aware recommendations, dependable support, and builds that help Chicago DJs and event pros perform with confidence.
Frequently Asked Questions — ProX XS-M12BL
What mixer size does the XS-M12BL support?
It’s designed for 12-inch large-format DJ mixers in a universal fit category.
How does the front panel help during sets?
The removable front panel opens direct access to front controls and headphone/mic jacks for quick changes.
Is it suitable for Chicago mobile DJ work?
Yes—the black-on-black finish, rugged build, and organized cable path support fast ballroom flips and club takeovers.
What protects the exterior against wear?
The Honeycomb Digital™ laminate helps resist minor to mild scratches and keeps the case looking professional.
Is any gear shown in photos included?
No—any pictured devices are for reference only and are not included with the case.
Tell us your mixer model and booth layout—we’ll validate fit and tailor cable-through and access for your exact workflow.
