Road-Ready Armor for DDJ-FLX10 & DDJ-GRV6 — LED Shelf, 1U Rack, Blacked-Out Finish
Protect, deploy, and move fast. The ProX XS-DDJFLX10WLTBLLED (LED version) and XS-DDJFLX10WLTBL (non-LED) are ATA flight-style road cases purpose-built for Pioneer DDJ-FLX10 and AlphaTheta-Pioneer DJ DDJ-GRV6. A sliding laptop shelf with cable-thru, integrated 1U rack space, and low-profile off-terrain wheels create a clean, efficient booth workflow for Chicago mobile DJs, club installs, and touring crews.
Built to survive the run. Gig-Ready™ construction starts with rugged 3/8" plywood, steel ball corners, twist-locking recessed butterfly latches, and recessed spring-loaded rubber handles. CNC manufacturing holds tight tolerances, while the Signature Honeycomb Digital™ Surface resists scuffs and keeps the look sharp. Inside, high-density foam cradles your controller; the removable front panel unlocks headphone/mic jack access and front-panel controls. A rear under-controller bay carries cables and small accessories.
LED workflow option. Choose the LED model to add a pre-installed RGB 20" LED fixture that gives your booth a modern visual edge without extra stands or taping. Both models share the same blacked-out hardware/finish and field-proven layout.
Eco-minded foam, pro-grade feel. The interior uses high-density rubber foam with recycled content to reduce waste while maintaining the resilient support DJs expect from ProX.
Size & move with confidence. Exterior: 9.00"H × 20.50"W × 32.50"L, Weight: 40.0 lb. Shipping: 11.00"H × 22.00"W × 34.00"L, 46.0 lb. Suggested method: Parcel. UPC: 804589618355.
- Real-World Applications and Sound Roles:
- Mobile DJ weddings & corporate AV where fast laptop-plus-controller setup is essential
- Club DJ booths needing a clean, secure shelf and front-panel access
- University/house-party circuit—load-in/out with wheels, protect gear between gigs
- Rental fleets that demand lifetime durability and easy field service
Where the ProX XS-DDJFLX10WLTBLLED Wins for Working DJs
- Two-tier workflow: Sliding laptop shelf keeps screens at eye level while the deck stays clear for cuts and loops.
- Built-in 1U bay: Mount interfaces, wireless, or power control under the shelf for a clean, cable-managed booth.
- LED booth polish: Pre-installed RGB 20" strip (LED model) adds a subtle glow—no extra clamps or stands.
- Fast front access: Removable panel exposes headphones, mic, and front controls the second doors open.
- Road-tough shell: CNC-cut 3/8" plywood, steel ball corners, and twist-locking latches handle nightly load-outs.
- Scratch-resistant skin: Honeycomb Digital™ surface keeps the blacked-out look photo-ready for weddings and clubs.
- Protective fit: High-density foam cradles the controller; add foam for DDJ-GRV6 to lock it in tight.
- Roll-and-go mobility: Low-profile wheels and recessed rubber handles speed Chicago dock ramps and tight stairs.
- Stash space where you need it: Rear under-controller bay organizes essentials so strike time stays quick.
- Booth-friendly aesthetics: Black hardware + finish blends into lounges, corporate AV, and club installs.
- Rental-ready dimensions: Parcel-friendly size/weight simplifies shipping between dates and fleet turns.
LED-Ready Booth Workflow (XS-DDJFLX10WLTBLLED)
The LED version arrives with a pre-installed RGB 20" LED fixture, giving your DDJ-FLX10 or DDJ-GRV6 rig a subtle accent glow. It’s built into the case—no extra clamps, cables, or tripods—so DJs can roll in, power up, and focus on the set.
Gig-Ready™ Construction Details
- Panels: Rugged 3/8" plywood engineered for repeated transport.
- Hardware: Steel ball corners, twist-locking butterfly latches, recessed rubber handles.
- Finish: Black hardware + black exterior for a unified, minimal look.
- Protection: High-density foam for secure fit; rear storage bay for cables.
Sustainability-Focused Foam
Interior rubber/foam padding includes recycled materials, reducing environmental impact while maintaining ProX’s protective standards for daily gig use.
Controller Fit & Front Access
DDJ-FLX10: direct fit (2.90"H × 28.00"W × 15.80"L). DDJ-GRV6: fits all FLX10 cases with additional foam to tighten the hold. The removable front panel preserves quick access to headphone and mic I/O during sets.
Mobility, Storage & Dimensions
Low-profile off-terrain wheels and industrial rubber feet stabilize the case on stage and in trucks. Exterior: 9.00"H × 20.50"W × 32.50"L; Weight: 40.0 lb. Ships parcel in a 11.00"H × 22.00"W × 34.00"L carton (46.0 lb).
How to Deploy Your ProX XS-DDJFLX10WLTBLLED Case
- Stage the case on a flat surface; set brakes on your cart before opening.
- Remove the front access panel to expose the controller’s headphone/mic jacks and front controls.
- Slide out the laptop shelf, route USB/power via the cable-thru, and secure slack away from faders/jogs.
- Install 1U gear beneath the shelf as needed (interfaces/power). Verify clearance before closing.
- DDJ-GRV6 users: add the extra foam as needed to ensure a snug, transport-safe fit.
- After performance, remove your laptop and any devices from the shelf before transport. Do not move the case with the shelf ajar.
- Close the shelf fully, reattach the front panel, and lock the butterfly latches prior to rolling out.
Why Choose AVMaxx for Your DDJ-FLX10 / DDJ-GRV6 Case
- Field-proven guidance: We build pages and recommendations from authorized ProX data you provide—nothing guessed, nothing borrowed.
- Chicago & mobile-DJ focus: We prioritize fast load-ins, club-booth ergonomics, and rugged hardware that survives the week-to-week grind.
- Config clarity: We call out differences between LED vs. non-LED models and note the DDJ-GRV6 foam requirement up front.
- Lifetime mindset: ProX’s limited lifetime warranty support and durable materials help protect your investment.
Frequently Asked Questions — ProX XS-DDJFLX10WLTBLLED / XS-DDJFLX10WLTBL
Will a DDJ-GRV6 fit this case?
Yes. The DDJ-GRV6 fits all DDJ-FLX10 cases; add small additional foam to ensure a tight, transport-safe hold.
What’s the difference between the LED and non-LED models?
The XS-DDJFLX10WLTBLLED includes a pre-installed RGB 20" LED fixture. The XS-DDJFLX10WLTBL omits the LED but otherwise shares the same construction and layout.
Can I DJ with the laptop on the sliding shelf?
Yes—extend the shelf, route cables through the cable-thru, and keep the shelf clear when moving the case. Never transport with the shelf ajar and do not leave devices inside when closed.
Are the front controls and jacks accessible?
Yes. The removable front panel provides access to headphone and mic jacks and other front-panel controls during performance.
What’s included in the box?
One ProX road case (model per your selection). Third-party products shown are for display only and are not included.
Tell us your booth layout and controller choice (DDJ-FLX10 or DDJ-GRV6), and we’ll help finalize the exact case configuration for clean wiring and rock-solid protection.
