ProX XCP-DMX10 Premium 10ft DMX Control Cable

Reliable DMX Signal for Mid-Range Lighting Patches

Included Components

Explore each component in detail:

• ProX XCP-DMX10 Cable: A 10ft premium 3-pin DMX (XLR male to female) cable with molded strain relief, high-density shielding, and oxygen-free copper conductors.

Performance and Control

Portability and Design

Where This System Shines

• Mobile DJs: Cleanly link DMX controllers to nearby foggers or uplights without over-cabling.
• Lighting Techs: Ideal for fixture-to-fixture links or truss-mount daisy-chains at mid-range spans.
• AV Installers: Perfect for rack-to-patch DMX lines or fogger signal from wall-mounted DMX splitters.
• Event Production Teams: Reliable, durable cable for compact stages or booth-area FX placement.

Accessory Spotlight for the ProX XCP-DMX10

• ProX XCP-DMX25: Step up for controller-to-lighting tree runs or cross-truss spans.
• ProX XCP-DMX5: Short 5ft jumper for tight booth-to-splitter or rack-mounted fogger connections.
• Chauvet Data Stream 8: Perfect fog machine pairing — use the 10ft DMX cable to connect from rack or booth.
• Chauvet DJ 6Spot RGBW: Route multiple fixture runs from a central signal point with mid-length cable flexibility.
• ProX Gaffer Tape: Tape 10ft DMX cable across trusses or along stage risers with confidence and no sticky residue.
• Chauvet DJ SlimPAR T6BT: Trunk case built to organize 5–10ft DMX patch cables and quick-access adapters.

Useful Links for Expanding Your DMX Patch Setup

• DMX & XLR Cables: Shop all available DMX lengths and XLR signal cables compatible with lighting systems.
• Chauvet LED Bars and Strips: Link short DMX cables to uplight bars or wall washes in tight truss or booth areas.
• Chauvet Moving Head Fixtures: Patch 10ft cables between adjacent moving heads or center truss effects.
• Chauvet Fog and Haze Machines: Ideal for direct booth-to-fogger connections without over-cabling.

How to Deploy the ProX XCP-DMX10 in the Field

• Controller to Fog Machine: Use the 10ft DMX cable to connect your controller or splitter directly to a fogger positioned behind the booth or near center stage.
• Truss Patch Between Fixtures: Link LED pars or moving heads mounted on the same or adjacent truss bars — long enough to reach without creating messy loops.
• Wall Plate or DMX Box Patching: Cleanly run signal from a DMX wall jack or venue install to your gear racks without overcabling.
• Rackmount to Floor Signal: Connect from a DMX controller or processor in a portable rack to nearby floor FX without tangled slack.
• Splitter Out to First Fixture: Ideal for feeding your first light from a DMX splitter — giving you routing freedom while keeping the signal chain tight.

Recommended System Pairings for the ProX XCP-DMX10

• Chauvet DJ Obey 10 Controller: Use the 10ft DMX cable to patch from this compact controller to your first fixture or DMX hub with clean routing.
• Chauvet DJ D-Fi Hub: Link from your DMX output into this wireless transmitter using a clean 10ft run — ideal for hybrid setups.
• Chauvet Hurricane 1600: Connect this DMX-controllable fogger from your booth or rack with just enough length and no excess coil.
• ProX XB-160 Cable Bag: Organize and transport 10ft DMX cables neatly inside this padded soft case with divider sleeves.
• Chauvet DJ DMX-RT4 Trigger Box: Connect to the DMX input on the RT4 for triggering chases, foggers, or pre-programmed FX cues in time with music or lighting commands.

Why Choose the ProX XCP-DMX10 from AVMaxx?

Mid-length DMX cables like the ProX XCP-DMX10 are essential for clean, efficient lighting setups — and AVMaxx delivers them ready for action. Whether you're connecting foggers, patching between truss fixtures, or linking splitters, we back every ProX cable with expert support, fast shipping, and real-world insight.

Why Choose the ProX XCP-DMX10 from AVMaxx?

For patching gear quickly, cleanly, and reliably, the ProX XCP-DMX10 offers the ideal length and rugged build. Get the performance your DMX rig deserves — from the AVMaxx team you trust.