ProX X-DDJFLX4LT Flight Case for DDJ-FLX4 DDJ-400 SB3

ProX X-DDJFLX4LT: Laptop-Shelf Road Case for DDJ-FLX4 / DDJ-400 / DDJ-SB3

Built to travel and perform, the X-DDJFLX4LT protects your Pioneer controller and adds a smooth sliding laptop shelf for clean, compact rigs. The Gig-Ready Series chassis uses 3/8-inch plywood with reinforced steel ball corners, recessed butterfly latches, spring-loaded recessed handles, and a Honeycomb Digital exterior that helps disguise scuffs from nightly load-ins. CNC manufacturing keeps panels square so the lid seats tight and stacks cleanly on carts and shelves.

Inside, high-density foam cradles your controller and preserves faders, encoders, and pads during transport, while a removable front panel gives instant access to front-edge controls, headphone, and mic jacks. The sliding laptop shelf includes a cable-thru for tidy routing, with accessory space at the rear under the controller for small items. Additional lid clearance (about 3 inches) and cable space (about 3 inches) help the case adapt to varied setups without stressing connectors. Materials choices support sustainability goals, using foam with recycled content, and the case is backed by the ProX Limited Lifetime Warranty.

• Real-World Applications & Use Cases:
• Mobile DJ sets that need a fast laptop-over-controller layout and quick changeovers.
• Club booths where a compact footprint, front-panel access, and clean cabling matter.
• Practice and streaming rigs that benefit from integrated laptop positioning.
• Rental fleets requiring consistent fit and rugged road hardware.
• College events and pop-ups where durability and simple teardown are essential.

Where This Case Excels

• Controller compatibility: Sized for Pioneer DDJ-FLX4, DDJ-400, and DDJ-SB3 workflows.
• Integrated laptop shelf: Sliding tray with cable-thru keeps screens close and wiring out of sight.
• Road-ready shell: 3/8-inch plywood, steel ball corners, and dual-rivet reinforcement for nightly use.
• Low-profile hardware: Recessed latches and spring-loaded handles reduce snags in tight packs.
• Tidy cabling: Rear accessory bay and pass-throughs simplify power and audio routing.
• Front access panel: Quick reach to headphone, mic, and front-edge controls without removing the unit.
• Extra clearances: Added lid height and cable space help avoid pressure on jacks and knobs.
• Stable staging: Industrial rubber feet keep the base planted on tables and risers.
• Scuff-resistant finish: Honeycomb Digital exterior maintains a clean, professional look.
• Long-term value: High-density foam with recycled content and ProX Limited Lifetime Warranty.

Construction & Materials of the X-DDJFLX4LT

Built for nightly shows and fast changeovers. The X-DDJFLX4LT uses an ATA-300 style chassis from 3/8-inch plywood, reinforced with steel ball corners and dual anchor rivets. Recessed butterfly latches and spring-loaded recessed handles stay low profile to avoid snags in tight packs, while industrial rubber feet keep the base planted on tables and risers. The result is a rigid, gig-ready shell that closes square and travels quietly.

Honeycomb Digital Finish & Hardware Aesthetics

Clean look that hides wear. The Honeycomb Digital exterior uses a textured laminate that helps resist minor scuffs and keeps a consistent booth-ready appearance. Silver hardware over a black finish reads professional under club lighting and backline LEDs, matching modern controller rigs without drawing attention to road rash.

Sliding Laptop Shelf: Mechanics & Safety

Screen where you need it, with smart cable-thru. The integrated sliding laptop shelf positions your computer directly above the controller for compact setups and clean sight lines. A built-in cable pass-through keeps wiring tidy. Safety notes: do not leave a laptop or other devices inside the closed case, and do not move or transport the case with the shelf open or devices on the shelf.

Interior Fit, Foam Protection & Accessory Bay

Shock control and handy storage. High-density foam cradles the controller to protect faders, pads, and encoders during transport. The console cavity measures approximately 3.50" H x 10.50" W x 19.00" L. Extra clearances make load-ins smoother: about 3" additional lid height and about 3" additional cable space. A rear accessory area under the controller holds small cables and essentials you need at the booth.

Front Panel Access & Cable Management

Quick reach, clean routing. The removable front panel exposes front-edge controls plus headphone and mic jacks so you can patch up without lifting the unit. Pair the front access with the shelf cable-thru to run short, strain-relieved power and audio lines that stay out of the way and keep the lid off the floor.

Road Hardware & Handling Details

Low-profile parts that survive the grind. Recessed butterfly latches lock down the lid, and spring-loaded recessed handles center the lift for safer moves. Heavy-duty steel ball corners protect high-stress edges, and rubber stopping feet add stability when stacking or setting on risers. Everything is laid out to support fast strikes and repeatable weekly use.

CNC Manufacturing, Warranty & Eco Materials

Consistency you can trust, materials that matter. CNC manufacturing holds tight tolerances so panels meet flush and hardware lines up case after case. The X-DDJFLX4LT includes the ProX Limited Lifetime Warranty. Inside, durable hard rubber foams use approximately 70% recycled content (about 80% from recycled plastic bottles and about 20% from recycled post-industrial material) to support long-term, responsible use.

Controller Compatibility & Key Dimensions

Dialed for popular Pioneer controllers. Sized for the DDJ-FLX4, DDJ-400, and DDJ-SB3, the case provides a console space of roughly 3.50" H x 10.50" W x 19.00" L plus a sliding laptop shelf area of about 21.5" x 11.5". Exterior dimensions are approximately 10.00" H x 17.00" W x 22.50" L at about 20.0 lb. For shipping, expect around 11.00" x 18.00" x 23.00" at about 22.0 lb (suggested method: parcel). Use the added 3" lid and 3" cable clearances to avoid pressure on jacks and knobs when packing.