ProX T-SP36 Speaker Pole Mount: 36-Inch Steel Extension for 35mm Sub + Top Stacks
The ProX T-SP36 is a 36-inch steel speaker extension pole designed for common 35mm (1-3/8-inch) pole-mount workflows.
It is built to create practical spacing between a subwoofer base and a top cabinet when you need more height than a short distance rod can provide.
With a rated capacity of 220 lb / 100 kg, plus steel construction, a rubber cap, and a black powder coat finish, the T-SP36 is aimed at repeatable event setups where stability and presentation matter.
It is a straightforward, non-powered accessory that supports cleaner coverage and a tighter footprint for mobile DJ and PA deployments.
- Height: 36 in
- Diameter: 1-3/8 in (35mm)
- Rated capacity: 220 lb / 100 kg
- Construction: Steel
- Finish: Black powder coat
Where the ProX T-SP36 Excels
- More usable height in stacked systems: The fixed 36-inch extension helps raise tops for clearer coverage in crowded rooms.
- Standard 35mm workflow: Built around 1-3/8-inch (35mm) diameter for common pole-mount setups.
- Capacity for real-world rigs: Rated to hold 220 lb / 100 kg when deployed within limits and on stable bases.
- Road-ready materials: Steel construction supports repeated handling in mobile DJ and event production cycles.
- Cleaner visual presentation: Black powder coat finish maintains a pro look under uplighting and on-camera.
- Contact protection: Rubber cap helps reduce wear at contact points during transport and storage.
- Chicago DJ practicality: A simple, repeatable piece for quick load-ins and consistent sub + top stack height across venues.
Control Modes for the ProX T-SP36
The ProX T-SP36 is a passive mounting accessory (no power, DSP, presets, or control interface). Performance is determined by correct mechanical seating,
stable placement, and staying within the rated load of 220 lb / 100 kg.
ProX T-SP36 Expanded Details
36-Inch Extension for Coverage Above the Crowd
A fixed 36-inch pole can help get top cabinets into a more practical height zone for speech and music clarity in busy rooms.
For mobile DJs, that often means less energy getting absorbed into bodies and more consistent coverage across the floor.
35mm (1-3/8-Inch) Diameter for Common Stack Workflows
The 1-3/8-inch (35mm) diameter is built for the typical pole-mount approach used in many sub + top stacks.
If your system is designed around 35mm pole mounting, the T-SP36 keeps the rig compact without moving to tripod stands.
Steel Construction with Black Powder Coat for Event Wear
- Steel construction supports repeated transport and handling cycles.
- Black powder coat finish keeps presentation clean for weddings, corporate AV, and club setups.
- Rubber cap helps protect contact points during storage and movement.
Compact Physical Profile for Packing and Handling
- Exterior size: 1.50H x 1.50W x 36.00L in
- Exterior weight: 1.80 lb
- Shipping box (1 of 1): 2.00H x 2.00W x 37.00L in; shipping weight 2.00 lb
- Suggested shipping method: Parcel
How to Deploy ProX T-SP36 in the Field
Use the ProX T-SP36 when you want a fixed 36-inch extension in a 35mm pole-mount workflow. The goal is stable seating and predictable height so your stack stays consistent from load-in to last song.
- Start stable: Place the base cabinet on a level surface before inserting the pole.
- Seat the pole fully: Confirm the T-SP36 is properly seated in the base mount before lifting the top cabinet into position.
- Center the load: Keep the top cabinet centered and the stack vertical to reduce unwanted movement.
- Respect the rating: Stay within 220 lb / 100 kg and keep the base stable throughout the event.
- Route cables cleanly: Avoid cable tension that can pull on the stack or create trip hazards.
For a show-ready 36-inch stack, prioritize full seating, level footing, and disciplined load planning so your rig stays stable and looks professional.
Why Choose the ProX T-SP36 from AVMaxx
The right pole height is a system decision, not a guess. The ProX T-SP36 is built for a specific job: a fixed 36-inch extension in a 35mm workflow with a clear 220 lb / 100 kg rating.
AVMaxx helps match real deployment needs to the right accessory so your stack height, transport plan, and event presentation stay consistent.
- Deployment-first guidance: Choose the height that fits your room coverage goals and stack workflow.
- Accessory accuracy: Focused on verified specs: 36-inch height, 35mm diameter, 220 lb / 100 kg rating.
- Chicago DJ intent: Recommendations that support quick setups, clean presentation, and repeatable results across venues.
AVMaxx supports ProX T-SP36 deployments with field-smart guidance so Chicago DJs and event teams can stack higher, stay stable, and keep coverage consistent.
Frequently Asked Questions — ProX T-SP36
What is the ProX T-SP36 used for?
The ProX T-SP36 is a steel speaker extension pole that provides a fixed 36-inch lift in a 35mm (1-3/8-inch) pole-mount workflow, commonly used in sub + top stacks.
What diameter is the ProX T-SP36 speaker pole mount?
The T-SP36 is 1-3/8-inch (35mm) in diameter, built for common 35mm pole-mount deployments.
How much weight can the ProX T-SP36 hold?
The rated capacity is 220 lb / 100 kg. Stay within that limit and use stable, level footing for the base cabinet.
Is a 36-inch pole a good choice for mobile DJs and event coverage?
A fixed 36-inch extension is commonly chosen when you need additional height in a stacked setup to help project above obstructions, especially in busy rooms where coverage consistency matters.
What is the finish and construction of the ProX T-SP36?
The T-SP36 features steel construction, a black powder coat finish, and a rubber cap.
What are the exterior and shipping dimensions for the ProX T-SP36?
Exterior dimensions are 1.50H x 1.50W x 36.00L inches with a listed weight of 1.80 lb.
Shipping is Box 1 of 1: 2.00H x 2.00W x 37.00L inches with a shipping weight of 2.00 lb, suggested method Parcel.
What is the UPC for the ProX T-SP36?
