ProX T-SP20 20in Speaker Distance Rod 35mm Steel

ProX T-SP20 Speaker Pole Mount: 20-inch Lift for 35mm Sub + Top Stacks

The ProX T-SP20 is a purpose-built 20-inch speaker pole mount designed to create clean, stable spacing between a subwoofer base and a top cabinet in common stacked PA deployments. Built from steel construction with a black powder coat finish, it is geared for repeated load-ins, fast setups, and consistent stage presentation.

With a 1-3/8-inch (35mm) diameter and a rated capacity of 220 lb / 100 kg, the T-SP20 focuses on the fundamentals that matter in the field: reliable support, predictable height, and a pro look that holds up under event lighting and camera coverage. A rubber cap helps protect contact points during handling and transport.

Real-World Applications and System Roles

• Mobile DJ sub + top stacks: Adds 20-inch separation to get coverage up where it matters without bulky stands.
• Corporate AV and breakouts: Keeps a clean footprint while maintaining a consistent, repeatable setup.
• Wedding and banquet rooms: Helps dial in sightline-friendly placement and a polished appearance.
• Small PA deployments: A straightforward spacer solution for rigs built around 35mm pole-mount workflows.

Where the ProX T-SP20 Excels

• Fixed 20-inch Lift: A consistent 20-inch height for repeatable sub + top spacing across venues and gigs.
• High Capacity Confidence: Rated to hold 220 lb / 100 kg for serious top-cabinet support within limits.
• 35mm Standard Diameter: Built around a 1-3/8-inch (35mm) form factor for common pole-mount deployments.
• Road-Ready Steel Build: Steel construction is built for transport cycles, load-outs, and regular handling.
• Clean, Pro Finish: The black powder coat finish presents well under uplighting, on camera, and in branded event setups.
• Contact Protection: A rubber cap helps reduce wear at contact points during storage and movement.
• Travel-Friendly Shipping Profile: Ships parcel-friendly at 2 x 2 x 20 inches with a listed shipping weight of 2 lb.
• Built for Chicago DJs: A simple, repeatable stack accessory for fast turnovers, tight load-ins, and reliable show flow.

Control Modes for the ProX T-SP20

The ProX T-SP20 is a passive mounting accessory (no power, DSP, presets, or control interface). Deployment is purely mechanical: height is fixed at 20 inches and performance is defined by safe mounting and staying within the 220 lb / 100 kg capacity.

20-Inch Separation That Tightens Real-World Coverage

When a top cabinet sits too low, coverage can get absorbed into bodies and furniture. The T-SP20 adds a predictable 20-inch offset so your top box can work above obstructions and keep speech and music more intelligible across the room.

Built for the Grind: Steel + Powder Coat for Daily Transport

• Steel construction supports repeated handling and travel.
• Black powder coat finish helps maintain a professional look gig after gig.
• Rubber cap helps protect surfaces and contact points during storage and load-out.

35mm (1-3/8-inch) Fit for Common Pole-Mount Workflows

With a 1-3/8-inch (35mm) diameter, the ProX T-SP20 is built for systems using a 35mm pole-mount approach. If your workflow is sub + top stacking, this is the clean spacer that keeps the rig compact and consistent without bringing in full tripod stands.

Capacity Headroom for Serious Tops in a Compact Form

Rated to hold 220 lb / 100 kg, the T-SP20 is designed for confident support when your deployment stays within limits and your mounting surfaces are stable. That rating matters when you want a compact stack that still feels locked-in for events where downtime is not an option.

How to Deploy ProX T-SP20 in the Field

Use the ProX T-SP20 to create a stable, repeatable sub + top stack when your system is built around a 35mm pole-mount workflow. The goal is simple: secure seating, level footing, and consistent height so coverage and presentation stay predictable across rooms.

• Start with stability: Place the base cabinet on a level surface before inserting the pole.
• Seat the pole fully: Ensure the T-SP20 is properly seated in the base mount before placing the top cabinet.
• Align and balance: Center the top cabinet and keep the stack vertical to minimize unwanted movement.
• Respect load limits: Stay within the rated capacity of 220 lb / 100 kg.
• Plan cable routing: Keep signal and power cabling tidy to reduce tugging and trip hazards around the stack.

A locked-in stack starts with full seating, level footing, and disciplined load limits—so your 20-inch lift stays clean, stable, and show-ready.

Why Choose the ProX T-SP20 from AVMaxx:

When you are building a reliable mobile rig, small details decide whether a setup feels professional or improvised. The ProX T-SP20 is a simple part with a big impact on coverage height, stability, and the polish of your sub + top stacks. AVMaxx focuses on matching real deployment needs to the right accessories, so you are not guessing on fit, workflow, or load planning at show time.

• Deployment-aware guidance: We help you think through stack height and room coverage before you roll in.
• Workflow-first selection: Built around 20-inch lift, 35mm diameter, and a clear 220 lb / 100 kg capacity target.
• Chicago DJ and event intent: Recommendations grounded in fast load-ins, clean presentation, and repeatable setups.

AVMaxx supports ProX T-SP20 deployments with field-smart guidance so Chicago DJs and event pros can stack cleaner, move faster, and show up looking dialed-in.