Deep 24" 10U Amp Rack That Handles Long-Chassis Amps, DSP, and Wireless
Roll in a cleaner, tougher backbone for your sound system. The ProX T-10RSS24 is a 10U vertical, ATA-style rack with a 24" rail-to-rail depth—purpose-built for modern long-body amplifiers, loudspeaker processors, and RF hardware that outgrow shallow cases. Standard 19" EIA mounting, front and rear removable lids, and an integrated caster base turn a fully populated rack into a fast, one-person load-in for clubs, hotels, and Chicago event spaces.
Protection that supports your workflow: Recessed spring-action handles, butterfly twist latches, reinforced ball corners, and rugged laminated panels are engineered for repeated load-ins. Dual rack rails (front/rear) enable balanced support for deeper/heavier gear, tidy cable dressing, and strain relief without fighting lid clearance.
Real-World Applications & Sound Roles:
- Mobile DJ amp/DSP hub: Consolidate power amps, crossovers, and processors in one rolling chassis.
- Club install service rack: Pop both lids for 360° access during maintenance and upgrades.
- Touring RF/IEM center: Mount receivers, distro, and network with rear-rail support for clean cabling.
- FOH utility: Fit deep interfaces and recorders that demand full 24" depth.
Where This Rack Excels
- Extended 24" Depth: Accommodates long-chassis amplifiers and processors other cases can’t.
- Dual-Rail Support: Front/rear rails reduce rack-ear stress and simplify rear I/O layouts.
- Fast Service Access: Front and rear lids remove for quick patching, testing, and thermal checks.
- Road-Ready Build: Recessed handles, twist latches, reinforced corners thrive on real gigs.
- Clean Cable Runs: Extra depth improves clearance for right-angle IECs and RJ45 boots.
- DJ & Venue Friendly: 10U height balances capacity with manageable footprint for booths and FOH.
Construction & Protection of the T-10RSS24
ATA-style laminated panels, steel ball corners, dual-anchor hardware, and recessed handles create a low-snag, high-strength enclosure that tolerates dock plates, elevators, and tight stage turns without chewing up cable looms or soft cases.
Rack Geometry & Compatibility
24" rail-to-rail depth paired with 19" EIA spacing across 10U of vertical space means deep power amps, DSP engines, RF receivers, and power modules all find a proper home. Rear rails welcome shelves, PDUs, and cable managers for balanced support.
Mobility & Locking Control
The integrated caster platform provides smooth transit over common venue obstacles, while locking wheels stabilize the rack at FOH or side-stage. The 10U height keeps center of gravity reasonable for safer pushes on ramps and into elevators.
Access, Airflow & Serviceability
Removable lids open the rack for 360° access—ideal for tracing signal flow, swapping wireless packs, or verifying thermal performance. The added depth helps lids close over right-angle plugs so connectors aren’t stressed post-show.
Cable Management & Power Strategy
Rear rails make it easy to centralize mains on a PDU and route signal on the opposite edge. Label I/O for low-light booths; leave clean intake/exhaust lanes for amps and high-draw DSP to keep temperatures stable during long sets.
How to Deploy in the Field
- Balance the build: Mount heaviest amplifiers low; mirror weight front/back using the rear rails.
- Power first: Install a rear PDU, then separate mains and signal paths to minimize hum.
- Preserve airflow: Keep intakes/exhausts unobstructed; add 1U spacers near hot devices if needed.
- Label the rear: Tag power and I/O for fast patches and fewer errors in low light.
- Confirm lid clearance: Test-close lids with right-angle IEC/RJ45 before show day.
- Secure on site: Engage caster locks and padlock latches when racks are unattended.
Why Choose from AVMaxx
Chicago-proven rack configurations. We build T-series racks for mobile DJs, club installs, and touring crews that face real sidewalks, freight elevators, and tight booths. Expect guidance tuned to Midwest venues and timelines.
Verified specs, zero guesswork. We publish only current manufacturer details and field-tested practices, so your rack deploys cleanly on day one—and stays reliable show after show.
Frequently Asked Questions — ProX T-10RSS24
What gear sizes fit this rack?
Standard 19" rack-mount components across 10U of height. The internal rail-to-rail depth is 24" for long-chassis amps, processors, and RF gear.
Does it include rear rack rails?
Yes—front and rear rails let you support deeper/heavier gear, add shelves/PDUs, and route cables cleanly.
Will right-angle power and network plugs clear the lids?
The 24" depth improves clearance for right-angle IECs and RJ45s when cables are properly dressed.
Is it a good choice for mobile DJs and club installs?
Absolutely. The deep chassis support, dual-lid access, and rugged hardware are ideal for DJ amplifiers, DSP, and wireless in busy venues.
Any deployment tips to keep things reliable?
Balance weight low, label rear I/O, separate mains and signal, and keep vents clear for stable temps during long sets.
Send your amp/DSP list and venue profile—we’ll map power, airflow, and cabling so Chicago load-ins are faster and cleaner.
