Purpose-built for the Pioneer DJM-A9 and DJM-V10, the XS-DJMV10A9BL is a true ATA-style road case that keeps premium club mixers safe in transit, on tour, and in installs. The rigid 3/8" laminated plywood shell with Signature Honeycomb Digital™ surface shrugs off dings and abrasions, while steel ball corners, dual-anchor rivets, and an aluminum tongue-and-groove frame lock the enclosure tight for repeat load-outs.
Inside, high-density foam support couples the chassis and protects controls; outside, recessed spring-action padded handles and butterfly twist-lock latches (padlock-ready) deliver confident carry and security. The case stands on industrial rubber feet and stacks cleanly thanks to reinforced corners. A rear utility bay (16"W × 4"H × 3.8"D) provides space for essentials, while precise internal sizing (4.00"H × 17.25"W × 18.00"L + 3" lid) fits modern Pioneer club mixers without slop.
Road crews will appreciate the practical details: 9.00"H × 20.00"W × 24.00"L exterior footprint for easy pack-out, a manageable 24 lb weight, and parcel-friendly shipping dimensions (10.50" × 21.00" × 26.00"). Backed by the ProX Live Performance Gear® Limited Lifetime Warranty and built with recycled-content foam padding, this case is ready for daily service in the booth, the truck, or the warehouse.
The XS-DJMV10A9BL is built around a rigid 3/8" laminated plywood shell that resists flex and impact during frequent load-ins. The exterior Signature Honeycomb Digital™ surface adds a durable, scuff-resistant skin with a sleek hexagon grid finish. Precision aluminum tongue-and-groove edging mates the lid to the base for a tight seal, while dual-anchor rivets reinforce stress points throughout the chassis.
Field-proven hardware protects the mixer and speeds changeovers. Heavy steel ball corners absorb edge hits, recessed spring-action padded handles keep carries comfortable, and butterfly twist-lock latches (padlock-ready) secure the lid for transit. Industrial rubber feet stabilize the case on tables, carts, and stage decks.
Inside, high-density foam support couples the mixer chassis, guarding knobs and faders against shock. The cavity is sized for modern Pioneer club mixers to reduce slop without compressing controls. A rear utility bay keeps essentials organized without crowding the deck.
The exterior footprint streamlines venue storage and truck packs. Reinforced corners aid clean stacking, while rubber feet prevent drift on carts and risers. The manageable mass supports mobile DJ, rental, and touring workflows.
ProX integrates recycled content where it matters: the internal rubber/foam padding contains 70% recycled materials (primarily post-consumer plastics and post-industrial content). Ownership is backed by the ProX Live Performance Gear® Limited Lifetime Warranty for long-term confidence.
Each case is produced using CNC machining to maintain consistent tolerances across panels and hardware locations. This precision manufacturing supports reliable lid alignment, repeatable fitment for DJM-A9/DJM-V10, and dependable sealing at the tongue-and-groove interface.
Carton sizing and mass are optimized for common carriers, simplifying direct-to-venue or warehouse moves. Protects investment through the last mile and back to the shop.
This workflow gets a Pioneer DJM-A9/DJM-V10 from warehouse to booth and back with minimal wear, fast setups, and predictable pack-outs.
Signature Honeycomb Digital™ laminated 3/8" plywood shell with high-density foam protection, steel ball corners, recessed handles, and twist-lock latches for reliable club and tour duty.
ATA-300 Honeycomb 3/8" shell, removable front panel, rear cable port; fits CDJ-3000, SC6000 Prime, and DJS-1000 for protected transport and fast booth access.
Studio-quality 96-kHz/64-bit mixing and dithering processing with flexible 4-band EQ—engineered for flagship club booths and creative routing workflows.
Built-in Wi-Fi enables Stagehand iPad app monitoring for FOH teams, pairing modern connectivity with performance tools optimized for pro installs and touring rigs.
Yes. The interior cavity is sized for DJM-A9/DJM-V10. Always verify the stated internal space of 4.00"H × 17.25"W × 18.00"L (+ 3" lid) against your mixer before first use.
No. This specific configuration does not include a sliding shelf. It is a dedicated mixer road case with a rear accessory bay for cables and small items.
The rear utility bay measures approximately 16"W × 4"H × 3.8"D, suitable for power leads, short XLRs/RCAs, adapters, and small tools.
Yes. The butterfly twist-lock latches accept small-shackle padlocks for added security during transit and overnight staging.
Keep the case upright on its rubber feet, align corner-to-corner for stacking, and strap across rows (not just over lids). The exterior footprint (9"H × 20"W × 24"L) nests cleanly in standard pack widths.
Yes—keep a short IEC and two short XLRs or RCAs in the rear bay. Bundle neatly to avoid foam snagging and confirm the lid closes without pressure on knobs or faders.
Parcel-friendly carton of 10.50"H × 21.00"W × 26.00"L at approximately 25 lb shipping weight simplifies venue drops and returns.
Inspect foam contact points quarterly, replace if compression set appears, and check rivets, corners, and latches for play. Wipe the Honeycomb surface to remove grit that can abrade finishes.
Ready to protect your club mixer with a proven road case? Lock in the XS-DJMV10A9BL today and roll into every show with confidence.
Select a row below to filter reviews.
5.0
All measurements and specs are taken directly from current ProX documentation and our in-house verification to ensure accurate fitment and deployment guidance.
Padlock-ready latches and reinforced corners safeguard your mixer investment through tours, rentals, and festival changeovers.
Every measurement and attribute above reflects current ProX documentation and the details you provided—no third-party estimates.
Padlock-ready latches, reinforced corners, and high-density foam secure your DJM-A9/V10 through club installs, rentals, and touring changeovers.
(1) ProX XS-DJMV10A9BL ATA Road Case: Black finish, Honeycomb Digital™ laminated 3/8" plywood shell with aluminum tongue-and-groove, steel ball corners, recessed padded handles, and butterfly twist-lock latches (padlock-ready).
(1) Pre-Installed High-Density Foam Interior: Custom support/cushioning for Pioneer DJM-A9 and DJM-V10; includes rear utility bay (approx. 16" W × 4" H × 3.8" D) for cables and small accessories.
(1) ProX Live Performance Gear® Limited Lifetime Warranty (per ProX terms; registration may apply).
Note: Any pictured mixers or accessories are for reference only and are not included with this case.
Each component is selected to protect your mixer and streamline show-day logistics from first load-in to long-term storage.
Padlock-ready latches and reinforced corners safeguard your investment during transport, rentals, and festival changeovers.
