Compact Color Output from the Mini Par RGBW LED
The Eliminator Mini Par RGBW LED is a small-form LED par can that delivers vibrant RGBW output from a compact 12-diode engine. Each fixture houses 12 x 1W LEDs (3 red, 3 green, 3 blue, and 3 white) and produces a 25° beam angle—ideal for uplighting columns, highlighting truss segments, or coloring tight zones on stage.
With three selectable DMX modes (4, 6, or 8 channels), this unit gives users flexible control over color mixing, master dimming, and mode-based triggers. Whether you're building a fixed color scheme or triggering audio-reactive FX, the Mini Par RGBW LED keeps setup simple while maintaining professional-grade color balance.
The compact chassis and ultra-low power draw (only 14W) make it a favorite for DJs, mobile performers, and small venue installs that require versatile looks without oversized hardware. Its front-panel menu offers direct access to fade, jump, pulse, sound active, RGBW dimming, and static color modes.
Real-World Applications and Sound Roles:
- Compact uplight for mobile DJ rigs and weddings
- Wall wash lighting in lounges, cafes, and banquet halls
- Affordable color FX for karaoke, rehearsal, or small stage zones
- Truss warming or accent lighting in production environments
Where This System Excels
- Ultra-Compact Design: Perfect for mobile DJs or tight install spaces with limited footprint.
- RGBW Diode Matrix: Delivers better color tone and white balance than RGB-only fixtures.
- DMX Versatility: Offers 4, 6, and 8-channel modes for flexibility across controller setups.
- Preset FX Modes: Access jump, pulse, fade, sound, and strobe from onboard menu—no controller needed.
- Efficient Operation: Runs cool and sips power—just 14W draw makes it easy to daisy-chain.
Control Modes for the Mini Par RGBW LED
The Eliminator Mini Par RGBW LED features a streamlined interface and multiple control options to support plug-and-play users and DMX programmers alike. Whether you’re running standalone shows or chaining units into your lighting network, this fixture keeps operation intuitive and flexible.
- DMX Channel Modes: Selectable 4-, 6-, or 8-channel configurations for scalable control. Each mode offers increasing access to dimming, color mixing, speed, and FX trigger parameters.
- Onboard Preset Modes: Includes Jump Change, Pulse Change, Fade Mode, Sound Active Pulse Mode, and RGBW Dimmer Mode. Each preset supports speed adjustment and optional strobe layering.
- Strobe Control: Manual flash speed control from FL.00 (off) to FL.12 (fastest), accessible from any mode.
- Color Control: Individual intensity sliders for red, green, blue, and white via menu or DMX. Full-range 0–255 resolution per channel.
- Sound Sensitivity: Adjustable from SF.00 (lowest) to SF.12 (most reactive) in Sound Active mode.
- DMX Addressing: Front-panel menu supports address assignment (001–512) and channel mode selection via 4-button interface.
DMX Trait Map & Channel Functions
The Eliminator Mini Par RGBW LED supports 4, 6, and 8-channel DMX operation, giving users scalable control over intensity, color mixing, and onboard effects. All three modes provide access to full-range dimming and RGBW output, while the 6- and 8-channel modes introduce effect sequencing and flash layering.
4-Channel Mode:
- CH1: Red (0–255)
- CH2: Green (0–255)
- CH3: Blue (0–255)
- CH4: White (0–255)
6-Channel Mode:
- CH1: Master Dimmer
- CH2–CH5: Red, Green, Blue, White
- CH6: Flash/Strobe (0–5 = off, 6–255 = slow to fast)
8-Channel Mode:
- CH1: Master Dimmer
- CH2–CH5: RGBW color mixing
- CH6: Auto FX Selection (ASC, ACC, FAde, SOUF)
- CH7: Speed/Sensitivity for selected FX
- CH8: Flash (0–5 = off, 6–255 = slow to fast)
This flexible channel design allows quick plug-and-play setups in 4-channel mode, while enabling full control of automated scenes and tempo with 8 channels.
Onboard FX Modes & Menu Navigation
The Mini Par RGBW LED includes six internal effect modes accessible via its rear-panel menu or DMX override. These include dim-to-color operation, sound-reactive chase, and multi-speed fade and jump sequencing.
Standalone Modes:
- RGBW Dimmer: Individual brightness for red, green, blue, and white channels (rL, gL, bL, uL)
- Jump Change: ASC mode (AS.00–AS.12) with strobe layering (FL.00–FL.12)
- Fade Mode: FAde (FA.00–FA.12) with adjustable speed
- Pulse Mode: ACC (AC.00–AC.12) for rhythmic color bursts
- Sound Active: SOUF (SF.00–SF.12) with mic sensitivity setting
Strobe Layering: All modes support independent flash overlays via the FLAS menu item, allowing creative tempo-based or atmospheric effects without DMX.
DMX Addressing & Setup: Accessible via "Addr" menu, with selectable channel mode (4/6/8) and fixture start address. Designed for simplicity in mobile installs.
This mode structure enables easy programming for mobile DJs, small installs, or entry-level programmers working without full console support.
How to Deploy the Mini Par RGBW LED
Thanks to its compact form factor and low power draw, the Mini Par RGBW LED is a plug-and-play fixture ideal for tight installs or mobile DJ rigs. At just 1 lb, it mounts effortlessly in truss, ceilings, or table-top setups with standard clamps or dual-sided tape.
- Uplighting: Perfect for wall washes and ambient color with minimal footprint—tuck behind pillars or under banquet tables.
- Truss Mounting: Easily clamps to F23–F34 style truss or mini T-bar arms using compact O-clamps or Velcro strap methods.
- Floor Positioning: Use in floor-based setups for DJ booths, stage backlighting, or effect uplighting without the need for kickstands or floor bases.
- Linking: DMX in/out ports allow up to 16 units daisy-chained in short-distance runs for pixel-style wash rows or mirrored color zones.
- Orientation: Can be safely operated in any position—horizontally on floors, vertically in truss, or hanging downward.
Its small size and simple setup make it an ideal option for beginner lighting users, photo booths, or DIY installations requiring multiple points of light without rigging complexity.
Why Choose the Mini Par RGBW LED from AVMaxx
AVMaxx understands compact lighting solutions better than anyone. We field test fixtures like the Mini Par RGBW LED in real-world DJ booths, banquet halls, and production kits—so we know how it performs under pressure. This unit is ideal for anyone needing quick RGBW color mixing in a discreet housing, and we ensure every Mini Par ships ready to deploy with factory-verified specs and full operational support.
Whether you're building a low-profile uplight system or adding a dash of color to your mobile DJ rig, AVMaxx provides the gear and guidance to get you gig-ready faster.
Frequently Asked Questions
Q: Can I use the Mini Par RGBW LED for uplighting?
A: Yes. It’s one of the best compact RGBW units for small-space uplighting thanks to its size, weight, and color precision.
Q: How many units can I link in DMX mode?
A: You can daisy-chain up to 16 Mini Pars in a single line using standard 3-pin DMX cables with minimal power draw concerns.
Q: Does it include built-in color programs?
A: Absolutely. You get static color mode, jump change, fade, pulse, sound-active, and RGBW dimmer options all onboard.
Q: Is this fixture flicker-free for video?
A: While not explicitly rated flicker-free, its basic RGBW diodes work well for most non-broadcast applications with adjustable dimming curves.
Q: Is it a good fit for mobile DJs?
A: Definitely. The Mini Par RGBW LED is designed for fast setup, ultra-light transport, and vibrant color in tight event spaces.
Need help building a complete RGBW lighting kit? AVMaxx can design your Mini Par system for weddings, stages, or permanent installs.
