Compact RGBW Beam Control with DMX and Built-In Programs
The Eliminator Stealth Beam delivers crisp, high-output beam effects from a tight 60W RGBW LED engine, housed in a compact, truss-friendly body. Whether mounted on speaker stands, flown on truss, or placed upright on stage decks, it brings tight beams and color mixing to mobile DJ rigs, clubs, and small venue installs without excess weight or complexity.
DMX control includes 5-channel and 17-channel modes for selectable programming depth. Use simple pan/tilt and color macros in 5ch mode, or unlock full 16-bit movement, RGBW mixing, color fade macros, and internal show control via 17ch mode. Sound active and standalone show modes make it ideal for plug-and-play installs or synced Master/Slave rigs.
The onboard LED display allows access to all key fixture functions—DMX addressing, channel mode, sound sensitivity, pan/tilt reversal, show selection, and more. Designed to be fast, reliable, and affordable, the Stealth Beam is an excellent fit for DJs, small clubs, and mobile techs who need vivid beam control without oversized gear.
Real-World Applications and Sound Roles:
- Mobile DJs needing fast, vibrant beam movement with minimal footprint
- Truss-mounted beam FX in small clubs or live music bars
- Sound-active uplighting with color macros and movement
- Budget-conscious installs wanting DMX and standalone compatibility
- DJ booths or stages needing low-profile visual impact
Where This Fixture Excels
- Compact Beam Engine: 60W RGBW LED delivers tight, punchy color projection
- DMX Flexibility: 5-channel for basic control, 17-channel for full programming
- Lightweight Design: Just 8.5 lbs, easy to mount, clamp, or ground-stack
- Built-In Shows: 8 internal programs plus Sound Active with speed control
- Master/Slave Support: Link up to 16 units with mirrored motion and shows
- Field-Ready Menus: Onboard display handles addressing, reset, inversion, and show logic
Control Modes for the Eliminator Stealth Beam
Multiple operational modes and menu-based configuration make the Stealth Beam flexible for both standalone setups and fully programmed DMX rigs. Choose between 5-channel or 17-channel DMX modes for access to simple color movement or deep programming of beam speed, color fades, macros, dimming, strobe, and pan/tilt control.
- DMX Addressing (AXXX): Set the start address using the display and arrow keys. Active only after selecting a show or mode first.
- Channel Mode (CHNd): Toggle between 5ch and 17ch to match your desired control depth or controller profile.
- Sound Active Speed (SPNd): Select “HISP” (High Speed) or “LoSP” (Low Speed) to adjust the fixture’s reaction speed in music mode.
- Show Mode (SHNd): Choose from 8 internal programs including chases, color changes, and randomized motion sequences.
- Pan/Tilt Reversal (PAn / tIL): Invert movement direction for symmetrical Master/Slave pairing or alternate truss angles.
- Master/Slave (SLNd): Assign units to “Mast” or “SL 1” for sync control without DMX — ideal for plug-and-play setups.
- Display Flip (dISP): Flip the onboard display 180° for inverted rigging positions.
- Reset (rSt): Reset pan, tilt, color, and motor functions with a single menu command.
- Factory Reset (rFAC): Restore all settings to Eliminator factory defaults.
The Stealth Beam is built for flexible deployment — whether you're linking multiple fixtures in a Master/Slave show, patching into a DMX console, or running stand-alone light chases without programming.
DMX Architecture & Trait Mapping in the Stealth Beam
Dual channel modes let users scale their control from plug-and-play to precision programming. In 5-channel mode, users control pan, tilt, color macros, speed, and simple movement programs. For more advanced rigs, 17-channel mode unlocks full RGBW mixing, strobe, dimmer, internal programs, and fine pan/tilt resolution.
DMX Channel Traits (5ch): Includes Pan, Tilt, Color Macros, Color Change Speed, and Pan/Tilt Program Selection. Ideal for entry-level controllers or fast programming of visual effects.
DMX Channel Traits (17ch): Adds 16-bit Pan/Tilt, RGBW color mixing, dimmer, shutter, color fades, motion speed, and motor reset. Built for live control and software-based sequencing.
Auto Trigger Support: Sound Active and internal program triggers are also DMX-addressable in both modes — allowing hybrid control between console and onboard logic.
Internal Programming & Standalone Features
Built-in operating modes include Sound Active and Show Mode. Choose from 8 internal auto-show programs or activate beat-reactive effects with adjustable movement speed. Programs are menu-selectable and Master/Slave-ready.
Sound Mode (SOUN): Uses internal mic to trigger movement and color effects. Switch between Low and High speed settings based on show tempo or music intensity.
Show Mode (SHNd): Select 1 of 8 onboard movement/color chases. Show 0 triggers randomized movement for low-prep deployment.
Master/Slave Setup: Link up to 16 units in sync. One fixture runs as master; others follow movement, color, and program settings automatically.
User Menu Logic & Fixture Navigation
Simple four-button interface and LED screen provide direct access to every operational setting. Users can assign address, select modes, reverse motors, and reset the fixture without external software or hardware.
Menu Functions: Include DMX address (AXXX), channel mode (CHNd), sound mode (SOUN), show select (SHNd), master/slave (SLNd), display flip (dISP), pan/tilt invert (PAn/tIL), reset (rSt), and factory reset (rFAC).
Advanced Offset Access (Ad t): Deep submenu for motor offset calibration. Technicians can fine-tune pan, tilt, and RGBW color wheel alignment using internal parameters. Ideal for correcting drift or aligning units in multi-fixture deployments.
How to Deploy in the Field
Truss Mounting: The Stealth Beam ships with an included bracket and hardware for secure truss attachment. Use the provided M12 bolt and nut to connect a clamp to the bracket, then fasten it to the fixture base. Always route the included safety cable through the eyebolted anchor and around a stable rigging point.
Ground Placement: Thanks to its compact housing and flat base, the Stealth Beam can be safely placed upright on stage decks, risers, or floor-mounted platforms. Useful for uplighting, side-firing, or back-wall effects when trussing is limited or unavailable.
Power Connection: Standard AC power cable plugs into the rear IEC inlet. Confirm fuse status before operation; the rear fuse holder includes a spare for fast on-site replacement. Always check power draw to avoid overloading circuits — each unit consumes 75W.
DMX Linking: Use 3-pin XLR input and output ports to chain signal across fixtures. Add a DMX terminator on the final unit when running long cable distances or complex scenes to prevent signal degradation.
Master/Slave Configuration: Link up to 16 fixtures using built-in Primary/Secondary logic. Assign one as “Mast” and others as “SL 1” for synchronized beam movement, show playback, or music-triggered effects — no external controller required.
Eliminator Stealth Series Comparison Chart
| Model |
Light Source |
Zoom |
Color Wheel |
Gobo Wheel |
Prism Effects |
Pan/Tilt Range |
Beam Angle |
Control Modes |
DMX Channel Modes |
Weight |
| Stealth Beam |
60W Cool White LED |
Fixed Beam |
9 Colors + Open |
8 Fixed Gobos + Open |
8-Facet Prism |
540° / 270° |
2.5° |
DMX, Sound, Show, Manual |
11, 13 ch |
8.3 lbs / 3.8 kg |
| Stealth Spot |
60W Cool White LED |
Manual Focus |
7 Colors + Open |
7 Rotating Gobos + Open |
3-Facet Prism |
540° / 270° |
12° |
DMX, Sound, Show, Manual |
11, 13 ch |
9.5 lbs / 4.3 kg |
| Stealth Wash Zoom |
7x 12W RGBW LEDs |
Motorized (5°–45°) |
N/A |
N/A |
N/A |
540° / 270° |
5°–45° |
DMX, Sound, Show, Manual |
11, 17, 22 ch |
9.5 lbs / 4.3 kg |
Why Choose the Stealth Wash Zoom from AVMaxx
At AVMaxx, we don’t just resell lighting—we deploy it in real-world DJ booths, club installs, and mobile truss rigs. The Stealth Wash Zoom is one of our top picks for color-rich washes with precise zoom control and full DMX programmability—all in a sub-11 lb body.
From our firsthand use, we know this fixture holds pan/tilt position reliably during fast scenes, and the zoom-to-wash response is fast enough for mid-show beam-to-flood transitions. Our verified packages include clamps, power linking specs, and controller mappings—so you get more than gear, you get the whole rigging plan.
We test every Stealth unit on real-world trussing before listing it—ensuring compatibility, reliability, and show-readiness out of the box.
AVMaxx isn't just a seller—we're your frontline tech partner for lighting that performs on show day.
Frequently Asked Questions
Does the Stealth Wash Zoom support true RGBW color control?
Yes. In 16-channel mode, you can control each Red, Green, Blue, and White diode individually, plus use macros and white temp blending.
Can this fixture run without a DMX controller?
Absolutely. Use Show Mode for internal programs or Sound Active for beat-synced effects. Great for mobile DJs or fast setup gigs.
Is the zoom effect motorized or manual?
The zoom is fully motorized and controllable via DMX or onboard menu. You can sweep from tight beams to broad washes during a show.
Can I link power and data across multiple units?
Yes. Locking AC input/output allows daisy-chaining of power, and 3-pin DMX In/Out supports full signal chain deployment across fixtures.
What makes this fixture ideal for mobile DJ use?
Its lightweight frame, low power draw (95W), PowerCON-style connectors, and onboard shows make it perfect for mobile rigs with fast setup needs.
AVMaxx doesn’t just answer questions—we design every bundle and accessory pairing to eliminate setup guesswork and deliver real show confidence.
