White DAS Audio VANTEC Line Array Package with Powered Tops, Subs, and Full Transport Kit
This white-finish DAS Audio VANTEC system is designed to meet the visual demands of high-end events while delivering the same tour-ready performance trusted by professionals worldwide.
The DAS Audio VANTEC-20A-W is a powered curved-source array module that blends compact size with high-output performance. It features a rear-loaded 12 inch woofer and an M-60 compression driver mounted to a 100º waveguide, creating smooth horizontal dispersion and consistent vertical coupling. With 500 W peak power and a built-in Class D amplifier, the 20A-W is tuned for clarity and punch across the vocal and mid-high spectrum. The onboard DSP includes FIR filtering, time alignment, and five factory presets—each designed to optimize phase response whether you’re flying three boxes or stacking six. Local configuration is handled through the rear LCD panel, but the real power comes from the DAScontrol™ wireless interface, which lets you adjust gain, delay, EQ, and polarity remotely. The white polyurea coating not only matches upscale environments—it’s road-tough and ready for rapid deployment in touring rigs and mobile DJ systems alike.
The DAS Audio VANTEC-118A-W is a powered 18 inch subwoofer engineered to extend the system’s response down to 35 Hz with deep, musical precision. It houses a long-excursion transducer in a bass-reflex enclosure, driven by a 1000 W Class D amplifier. Whether used in pairs or as a mono sub block, the 118A-W delivers fast transients and clean impact ideal for modern music playback, speech reinforcement, or full-band performance. Built-in DSP includes a variable low-pass filter, polarity inversion, and adjustable delay—accessible either from the back panel or wirelessly through DAScontrol™. Its visual footprint matches the 20A-W perfectly, allowing the entire system to blend seamlessly into white-themed or high-design venues without sacrificing low-end authority.
The included AX-VT20-W rigging bumpers are certified for flying or ground-stacking up to five VANTEC-20A-W units, or mixed configurations such as four tops with two VANTEC-118A-W subwoofers. With 11 pickup points and adjustable tilt angles, these frames provide the flexibility and security needed for safe deployment in mobile rigs, installed arrays, or temporary event builds.
A pair of FUN-3-VT20 padded covers is included to protect up to six VANTEC-20A-W units during transport. For the subwoofers, a single FUN-2-VT118 cover provides wraparound protection for both VANTEC-118A-W enclosures when mounted on the matching dolly. These rugged covers help preserve cabinet finish and reduce transport wear during load-in and storage.
Transport is handled with PL-VT20S steel dollies for the tops and a PL-VT118S wooden cart specifically designed to carry two VANTEC-118A-W subwoofers at once. Both carts are optimized for rapid movement, tight turns, and stage-side positioning in high-pressure production environments.
Where This System Excels
- Elegant White Finish: Ideal for upscale weddings, corporate AV, and premium event installs.
- Scalable Line Array Output: (6) VANTEC-20A-W units provide clean vertical coverage for medium to large venues.
- Integrated Wireless DSP: DAScontrol™ app enables remote system tuning and preset control via smartphone or tablet.
- Powerful Subwoofer Support: Dual VANTEC-118A-W 18 inch subs deliver deep, tight low end for DJs and live music.
- Tour-Ready Transport: Includes rigging bumpers, dolly carts, and covers for rapid load-in and gear protection.
Recommended Pairings for This Line Array Package
- ProX XS-282620LASPW: ATA-style utility trunk with locking casters, ideal for transporting DAS rigging gear, speaker covers, or cable sets.
- Pig Hog PHM50: 50 ft XLR cable with extra shielding for long signal runs between mixers and powered VANTEC-20A-W or 118A-W enclosures.
- ProX T-SS28P: Heavy-duty speaker stand pair with adjustable height and safety pins—useful for ground-stack setups without rigging bumpers.
- Mic Flow U80: Dual wireless mic system with rackmount receiver and handheld transmitters, perfect for DJs, vocalists, or MCs on event systems.
Control Modes
The DAS Audio VANTEC-20A-W and VANTEC-118A-W enclosures offer both local and wireless DSP control via the built-in DAScontrol™ system. Each powered module includes a rear-panel **LCD interface with rotary encoder**, providing direct access to:
- Factory DSP Presets: Optimized voicings for full-range use, array coupling, or top+sub configurations
- Delay Control: Adjustable time alignment settings for precise phase matching in complex rigs
- High-Pass and Low-Pass Filters: Configurable crossover points for integrated sub/top tuning
- Polarity Inversion: Quick phase reversal option for sub-to-top coupling correction
- Array Configuration Mode: Optimizes FIR processing for multi-unit hangs (VANTEC-20A-W)
For wireless control, the system supports **Bluetooth-based configuration** using the **DAScontrol™ mobile app**, allowing real-time adjustments to gain, EQ, delay, and preset selection from any position in the venue.
Onboard and wireless DSP controls make this package a powerful choice for techs who demand precision and mobility during live setup.
How to Deploy in the Field
This white-finish VANTEC line array system is designed for fast, scalable deployment in both touring and installed environments. Here's how to deploy it effectively:
- Array Stacking: Use the included AX-VT20-W rigging bumpers to suspend or ground-stack up to four VANTEC-20A-W modules per side for focused coverage.
- Subwoofer Positioning: Place the VANTEC-118A-W subs centrally or split L/R for directional low-end coverage. Polarity and delay tools are onboard for coupling alignment.
- Transport Setup: Load VANTEC-20A-W units onto the PL-VT20S dollies (up to 4 per cart) and secure with the FUN-3-VT20 protective covers for padded transport.
- Sub Transport: Stack both subs on the PL-VT118S wooden dolly and use the dual-unit protective cover for fast, damage-free movement and storage.
- Array Optimization: Use the built-in DSP delay, HPF/LPF, and array configuration presets to optimize each zone—especially important when flying or splaying multiple VANTEC-20A-W modules.
This system’s transport and rigging accessories are precision-engineered for quick load-in, safe suspension, and effortless reconfiguration between venues.
Amplifier Architecture of the DAS Audio VANTEC White System
The VANTEC-20A-W modules are powered by 500 W peak Class D amplifiers engineered for tight midrange delivery and array-ready vocal clarity. These lightweight amps reduce thermal buildup and allow fast deployment in flown or stacked configurations.
Each 20A-W amp includes full protection circuitry: thermal monitoring, soft-start power sequencing, and dynamic limiters prevent overload or shutdown during high-SPL use.
The VANTEC-118A-W subs are equipped with 1000 W peak Class D amplifiers tuned for maximum low-frequency extension. Designed to drive long-excursion transducers, these amps maintain transient control even under sustained bass-heavy content.
Limiter behavior, headroom, and filter protection are calibrated to match real-world conditions—giving DJs and live engineers consistent low-end power without distortion or collapse.
Amplifier and DSP stages are tightly integrated at the signal level. All crossover, gain, and alignment functions are processed at the amp input for accurate top-to-sub phase response and consistent array behavior.
DAS Class D amps are engineered for power-to-weight efficiency—giving you maximum output without sacrificing thermal stability or system protection.
Digital Signal Processing in the DAS Audio VANTEC White System
Both the
VANTEC-20A-W and
VANTEC-118A-W include powerful onboard DSP, giving you professional-grade control without requiring external processors or rack gear.
Each enclosure features a
rear LCD interface with rotary encoder, allowing direct access to voicing presets, polarity, high-pass and low-pass filters, delay, and gain. The tops include
FIR filtering to maintain phase coherence across multi-box arrays, critical for clean summing and audience coverage.
For wireless control, the system supports the
DAScontrol™ app, which connects to each speaker via Bluetooth. From your mobile device, you can adjust system delay, crossover settings, output level, EQ curves, and preset modes in real time—without physically touching the boxes.
The DSP toolset is optimized for real-world deployment:
- Array Coupling Presets on the 20A-W adjust EQ for 2–6 box configurations
- Sub Polarity and Delay tools align tops and subs with minimal phase loss
- User-Selectable Crossovers adapt easily to stacked, flown, or hybrid setups
Whether you're flying arrays for a corporate install or stacking for a 500-guest ballroom wedding, the integrated DSP ensures your system stays aligned, responsive, and easy to deploy.
This level of onboard and wireless DSP integration gives you the control of a digital console—without needing one on-site.
Expanded Processing: DAS Audio INTEGRAL-M26X
The DAS Audio INTEGRAL-M26X is a rackmount 2-in/6-out digital signal processor that extends control and optimization for any DAS Audio system. Designed for both fixed installs and touring applications, it offers unmatched signal routing, alignment, and remote control across complex deployments.
- ALMA™ Control: Full networked control via PC/Mac and mobile apps using DAS Audio's ALMA software.
- FIR-Capable Filtering: Linear-phase crossover control with 48 dB/oct options and preset libraries for EVENT, ARA, VANTEC, and more.
- Install-Ready I/O: Balanced XLR connections, GPIO triggers, and support for OSC and RS-232 protocols.
Every INTEGRAL-M26X deployment is backed by DAS's official preset libraries—ensuring phase-coherent, FIR-tuned results across EVENT and VANTEC systems.
Explore Individual Items In Depth
- DAS Audio VANTEC-20A-W: White-finished powered array module with 750 W continuous power. Perfect for premium installs and mobile DJ stacks.
- DAS Audio VANTEC-118A-W: Matching powered sub with 18 inch driver and 2,000 W peak output. Clean, high-impact bass in a crisp white cabinet.
- DAS Audio AX-VT20-W: White rigging bumper for flying up to five VANTEC-20A-W units. Ideal for suspended installs and vertical deployments.
- DAS Audio FUN-3-VT20: Triple-stack protective cover for VANTEC-20A/W. Keeps gear clean during transport, load-in, and prep.
- DAS Audio PL-VT20S: Steel dolly for rolling up to four VANTEC-20A modules. Essential for pre-stacked white arrays in fast-turn venues.
- DAS Audio FUN-2-VT118: Cover for (2) stacked VANTEC-118A-W subs. Water-resistant black nylon outer shell ensures clean delivery.
- DAS Audio PL-VT118S: Dolly for transporting two VANTEC-118A-W subwoofers. Heavy-duty wood platform supports clean, rolling sub deployment.
Why Choose from AVMaxx
At AVMaxx, we don’t just list powered arrays—we deploy, test, and configure them in real production environments. This white DAS Audio VANTEC package isn’t a random bundle. It’s the result of real-world experience with how DJs, AV companies, and venue installers use these components under pressure.
From the **AX-VT20-W rigging bumpers** to the **PL-VT118S dolly**, every item in this system has been field-tested by our team for rigging flow, transport speed, and DSP tuning flexibility. We don’t sell you “what fits”—we build what performs.
Need white-finish pro audio that looks elegant and sounds massive? This is it—and we’ve optimized it from unboxing to FOH control.
When you order from AVMaxx, you’re not just buying boxes—you’re getting a fully curated system that’s built to work the way you work.
Frequently Asked Questions about the White DAS Audio VANTEC Line Array System
Can this system be used for both live music and DJ events?
Yes. The VANTEC-20A-W tops deliver detailed mid-highs with smooth array coupling, while the VANTEC-118A-W subs provide deep, punchy low-end—making this package ideal for both DJ playback and full-band reinforcement.
Does the DAScontrol™ app require extra hardware?
No. DAScontrol™ is a free Bluetooth-based app that connects directly to each powered enclosure. It gives you wireless access to presets, delay, EQ, polarity, and gain controls without needing any external DSP unit.
Is this system suitable for upscale weddings and corporate events?
Absolutely. The all-white finish, compact form factor, and wireless DSP make it ideal for visually sensitive environments where premium sound must be delivered discreetly.
Can I ground-stack the system or does it need to be flown?
Both options are supported. The AX-VT20-W rigging bumpers allow secure flying or ground-stacking of the VANTEC-20A-W modules. The system also includes dollies and covers for fast mobile deployment.
How many people can this system comfortably cover?
With six tops and two 18 inch subs, the system is well-suited for events up to 500 guests, depending on layout and program material. The array design ensures consistent coverage across wide horizontal zones.
Looking for white gear that sounds as good as it looks? This VANTEC package gives you wireless control, clean aesthetics, and real-world output—ready for the most demanding live events.
