DAS Audio EVENT Line Array Package with Powered Tops, Subs, and Complete Transport System
This all-black DAS Audio EVENT system is engineered for professional sound reinforcement across concerts, corporate events, and large-scale DJ productions. With a scalable 8-top / 4-sub configuration and full rigging and transport integration, it delivers unmatched sonic precision and deployment flexibility.
The DAS Audio EVENT-28A is a powered dual 8 inch line array element equipped with two 8MI woofers and an M-60 compression driver mounted to a waveguide optimized for consistent horizontal dispersion. Its Class D amplifier delivers 550 W peak output, supported by intelligent thermal and dynamic protections. Onboard DSP features include FIR filtering, multi-position voicing presets, delay alignment, and array mode configuration. System tuning is handled via rear-panel controls and a rotary LCD interface, ensuring consistent coupling and zone coverage whether flown or ground-stacked. Built for demanding venues and live rigs, the EVENT-28A combines clarity, punch, and compact form—ideal for vocal-forward reinforcement and full-spectrum music playback.
The DAS Audio EVENT-118A powered subwoofer delivers deep low-end response through an 18 inch long-excursion speaker housed in a bass-reflex enclosure. With 1000 W peak Class D power and DSP-controlled performance, it offers rich, fast-response bass down to 35 Hz. The enclosure is designed to seamlessly array with EVENT-28A modules using optional joining plates and stacking brackets. Built-in low-pass filtering, delay, and polarity inversion ensure top-to-sub alignment for tight, phase-consistent bass extension in any setup configuration.
Rigging is handled by (2) AX-EV28 flying bumpers, each certified to support up to 16 EVENT-28A units. These frames feature multiple pickup points and tilt adjustment for secure flown arrays and variable splay angles. For stacked arrays, (2) AXS-EV28 brackets allow up to 4 EVENT-28A modules to be securely mounted on any subwoofer, combining safety with modular flexibility for mobile stages or hybrid PA builds.
The system includes (2) PL-EV28S dollies for moving up to 6 EVENT-28A boxes per cart, and (2) PL-EV118S wooden transport platforms for rolling up to 2 EVENT-118A subs. These carts are built for stage-width transport, tight-turn radius, and stable ride across uneven floors.
Protective covers include (2) FUN-4-EV28 sleeves for grouped tops and (2) FUN-2-EV118 wraps for paired subwoofers—ensuring both safety and appearance between gigs or installs.
Real-World Applications and Sound Roles
- Corporate AV installs requiring discreet black finishes with full DSP and rigging control
- Medium to large indoor stages or mobile concerts with consistent audience coverage
- DJ and EDM systems needing scalable sub+top configurations
- Rental and production houses building modular powered inventory with tour-grade durability
- Live vocal systems requiring FIR-phase aligned clarity across front and side zones
All components in this package are backed by DAS Audio's engineering-grade integration—from cabinet voicing to rigging certification—for results you can count on under pressure.
Where This System Excels
- Tour-Grade Output in Compact Form: Eight EVENT-28A tops deliver articulate highs and midrange control with low-profile aesthetics.
- Certified Rigging and Stack Options: Includes AX-EV28 and AXS-EV28 frames for flown or stacked configurations up to 16 tops per bumper or 4 per stack.
- Scalable 18" Sub Bass Support: EVENT-118A powered subs provide tight, low-frequency punch for music and speech reinforcement.
- Full Transport Integration: Includes rolling dollies and protective covers for tops and subs—ideal for high-turnaround production.
- Integrated FIR and DSP Alignment: Each module features factory FIR filters, delay tuning, polarity tools, and array presets via rear LCD.
Explore the Core Components of This DAS Audio EVENT Line Array Package
- DAS Audio EVENT-28A: Dual 8 inch powered line array module with 100º coverage, Class D amplifier, and factory DSP presets for optimized coupling and SPL control.
- DAS Audio EVENT-118A: High-output powered 18 inch subwoofer designed to integrate seamlessly beneath flown or stacked EVENT-28A systems.
- DAS Audio AX-EV28: Certified flying bumper supporting up to 16 EVENT-28A modules for large-format flown deployments in touring or venue installs.
- DAS Audio AXS-EV28: Stacking bracket enabling secure ground-based arraying of up to four EVENT-28A enclosures on any EVENT-118A subwoofer.
- DAS Audio PL-EV28S: Steel-frame dolly with reinforced corners designed to transport up to 6 EVENT-28A units in vertical lock.
- DAS Audio PL-EV118S: Heavy-duty wooden transport base for up to two EVENT-118A subwoofers, with lock casters for mobile deployment.
- DAS Audio FUN-4-EV28: Protective Black nylon cover tailored for stacks of four EVENT-28A units on a PL-EV28S dolly—ideal for protection during transit.
- DAS Audio FUN-2-EV118: Protective nylon cover for two EVENT-118A subs on a PL-EV118S base, built to withstand rugged stage use or tour handling.
This package includes all components for multiple-use configurations—flyable arrays, ground stacks, and complete transport protection.
Control Modes
Both the EVENT-28A and EVENT-118A enclosures feature onboard DSP with rear-panel LCD screens and rotary encoders, providing direct access to:
- FIR-Tuned Voicing Presets: Factory EQ curves for single-unit use, arrays of 2–6 units, or full-scale deployments with subwoofers.
- High-Pass and Low-Pass Filters: Adjustable crossover settings to optimize top-to-sub integration in stacked or flown systems.
- Delay Alignment: Onboard delay tuning allows precise phase and time matching across speaker zones.
- Polarity Control: Instantly invert phase to correct coupling issues between mid/high modules and subs.
Each unit also includes limiter protection and thermal monitoring, ensuring reliable performance under high SPL and continuous load conditions.
No external DSP is required—each component in this EVENT system delivers phase-aligned, FIR-controlled output directly from the box.
How to Deploy the DAS Audio EVENT Line Array Package in the Field
This black-finish DAS EVENT system is engineered for both suspended arrays and ground-stacked deployment, offering full flexibility across mobile, touring, or installed environments.
- Flown Arrays: Use the AX-EV28 rigging bumpers to fly up to 16 EVENT-28A enclosures per side. Tilt angle and pickup point options support optimized throw patterns for medium to large venues.
- Stacked Arrays: Pair AXS-EV28 brackets with EVENT-118A subs to build stable, scalable ground towers of up to four tops over one or two subs—ideal for events without overhead rigging.
- Joining Plates: The JP-EV28 hardware enables rigid alignment between EVENT-28A and EVENT-118A cabinets for mixed-mode tower builds or reinforced anchor stacks.
- Rigging Safety: All flying and stacking accessories are DAS-certified for vertical load safety and deployment standards. Always follow DAS suspension guidelines.
This package includes every rigging and hardware component required to build suspended or ground-based configurations—no external frames or third-party gear needed.
Amplifier Architecture of the DAS Audio EVENT Series System
The EVENT-28A enclosures are powered by a two-channel Class D amplifier delivering 550 W peak to the low-frequency section and 200 W peak to the high-frequency driver. This bifurcated design enables dedicated energy to each transducer, ensuring tight low-end control and extended high-frequency clarity, even when running six or more modules in vertical array configurations.
Advanced thermal protection, soft-start circuits, and output limiters protect against overload and distortion during high-SPL use. These amplifiers are lightweight and efficient—perfect for flown or ground-stacked deployments where output, weight, and safety converge.
The EVENT-118A subwoofers are loaded with a high-performance 18 inch transducer and driven by a 1000 W Class D amplifier for extended bass reproduction down to 35 Hz. These amps are engineered for long-duty cycles and provide the dynamic headroom required for both music playback and full-range reinforcement.
DAS Class D amplifier modules deliver clean, efficient power without thermal compromise—ensuring full output stability during peak system demand.
Digital Signal Processing in the DAS Audio EVENT Series System
Each EVENT-28A and EVENT-118A enclosure features an integrated DSP engine optimized for line array and subwoofer deployment. The processors deliver all necessary tools for precise system alignment without requiring external rackmount gear.
On the EVENT-28A, the DSP controls FIR-filtered factory presets, EQ shaping, delay adjustment, and gain control. These functions are designed to ensure consistent performance across multi-box arrays and to maintain phase coherence between tops and subs.
The EVENT-118A subs include selectable low-pass filters, polarity inversion, and alignment delay, allowing seamless integration into flown or ground-stacked system layouts. System engineers can match sub-to-top timing and phase with minimal effort.
- FIR Filtering: Maintains phase response and intelligibility across all array sizes
- Presets: Configurations for full-range standalone, arrayed, or top+sub applications
- Delay and Polarity Tools: Built-in alignment tools to ensure summing consistency
With onboard DSP tuned specifically for array applications, the EVENT system gives you precise control and fast setup—no external processor required.
Expanded Processing: DAS Audio INTEGRAL-M26X
The DAS Audio INTEGRAL-M26X is a rackmount 2-in/6-out digital signal processor that extends control and optimization for any DAS Audio system. Designed for both fixed installs and touring applications, it offers unmatched signal routing, alignment, and remote control across complex deployments.
- ALMA™ Control: Full networked control via PC/Mac and mobile apps using DAS Audio's ALMA software.
- FIR-Capable Filtering: Linear-phase crossover control with 48 dB/oct options and preset libraries for EVENT, ARA, VANTEC, and more.
- Install-Ready I/O: Balanced XLR connections, GPIO triggers, and support for OSC and RS-232 protocols.
Every INTEGRAL-M26X deployment is backed by DAS's official preset libraries—ensuring phase-coherent, FIR-tuned results across EVENT and VANTEC systems.
Why Choose from AVMaxx
At AVMaxx, we specialize in building **real-world deployable sound systems**, not just equipment bundles. This DAS Audio EVENT line array package reflects our deep understanding of how touring techs, venue integrators, and event DJs use this gear under pressure—from fast rigging and DSP setup to clean teardown and transport.
Every component here has been hand-picked for **maximum compatibility, mobility, and sonic power**. We’ve flown these exact EVENT-28A and EVENT-118A modules in large halls and stacked them in tight clubs. We know what works when it’s showtime—and what doesn’t.
From the AX-EV28 rigging bumpers to the PL-EV118S dolly carts, we don’t just offer the right gear—we deliver solutions that make life easier for your crew, your client, and your bottom line.
Whether you need to add four more tops and two more subs, or prefer to leave out rigging or covers—AVMaxx can customize this system to fit your exact deployment. Just reach out to the AVMaxx team for a tailored quote.
Frequently Asked Questions about the DAS Audio EVENT Line Array Package
How many EVENT-28A speakers can I fly per bumper?
Each AX-EV28 rigging bumper is certified to fly up to 16 DAS Audio EVENT-28A modules in a vertical array, depending on angle and suspension load.
Can I ground-stack these speakers instead of flying them?
Yes. The AXS-EV28 stacking brackets allow you to mount up to four EVENT-28A units on top of EVENT-118A subwoofers or stage platforms, using DAS-certified alignment and locking hardware.
Is this a good system for DJs?
Absolutely. The EVENT-118A subwoofers provide tight, powerful low-end that’s ideal for electronic music, while the EVENT-28A tops maintain vocal clarity and smooth horizontal coverage across the dance floor.
Does this system include everything I need for flying and stacking?
Yes. This package includes rigging bumpers, stacking brackets, joining plates, transport dollies, and covers—fully enabling flown arrays, ground stacks, and hybrid deployments.
Can I transport the system fully stacked?
Yes. The PL-EV28S and PL-EV118S dollies are designed to carry multiple units while protected by DAS FUN series covers, making transport fast and secure in mobile productions.
Looking for a complete system with verified rigging safety, flexible deployment options, and true live-performance power? This EVENT array package from AVMaxx delivers.
