DAS Audio Event-212A Powered 3-Way Line Array

Build arena-grade coverage with the DAS Audio Event-212A

The DAS Audio Event-212A is the flagship 3-way powered line array cabinet in the Event Series, purpose-built for high-SPL environments, flown array consistency, and premium system voicing. Designed for large-format deployments—ranging from single-cluster corporate systems to 16-box per side flown festival rigs—this cabinet combines dual 12" low-frequency drivers, a horn-loaded 1.5" neodymium compression driver, and a three-channel Class D amplifier to deliver 135 dB peak output with precision and control. Each driver section receives dedicated power and processing, ensuring smooth crossover transitions and time-aligned performance across the system’s full 60 Hz–20 kHz bandwidth.

System tuning and setup are handled via the rear-panel DAScontrol™ DSP interface, which offers array-size presets, splay angle optimization, and delay alignment—all without external processing. FIR filtering and factory-matched voicing curves allow integrators and engineers to quickly configure arrays for stage-left/right mirroring, throw distance, and room-specific reinforcement patterns. The Event-212A is engineered to fly in matched vertical arrays of up to 16 cabinets per side using the AX-EV212 rigging frame, making it suitable for main stage reinforcement, permanent club systems, and concert-level DJ events that demand scalable clarity and impact.

Where performance meets deployment power

• 3-way active architecture: Discrete Class D amplifier channels power the LF, MF, and HF sections independently, ensuring low distortion and consistent voicing at scale.
• Dual 12" low-frequency drivers: Deliver extended bass foundation and focused midrange for high-headroom music playback and live vocals.
• DAScontrol™ DSP interface: Rear-panel configuration panel with preset recall, delay, and filtering for flown or stacked arrays.
• FIR-filtered signal path: Optimized crossover design with phase-coherent filtering to maintain sonic integrity across large clusters.
• Captive aluminum rigging system: Supports flown configurations up to 16 cabinets per side with secure pin-lock system and repeatable splay angle settings.
• Tour-ready enclosure: Birch plywood ISO-flex cabinet with ergonomic handles, textured coating, and road-tested durability.

Real-world applications and sound roles

The Event-212A is built for production crews, integrators, and touring professionals who require clean, controllable output for 500–5,000+ capacity venues. Fly it in matched left-right arrays for main stage coverage at festivals or permanent installs in music venues and houses of worship. Stack it over dual Event-218A subwoofers for DJ setups where speed, punch, and vertical control matter. With onboard DSP, no-rack deployment, and consistent response across the array, this speaker is ready for whatever your live workflow demands—without compromise.

Where the Event-212A excels

• Festival main stages: Engineered to fly in symmetrical left/right arrays of up to 16 cabinets per side, delivering powerful and consistent coverage to crowds exceeding 5,000 attendees.
• High-capacity DJ events: Perfect for electronic music, hip-hop, and crossover club formats that demand extended low-frequency impact and top-end clarity across wide horizontal zones.
• Touring A/V production: Designed for fast setup and reliable deployment under road conditions, with DSP-controlled protection and precision rigging hardware built into every unit.
• Large venue installations: Ideal for arenas, concert halls, and worship spaces requiring permanent flown arrays with consistent phase response, throw depth, and SPL scaling.
• Corporate and broadcast-grade applications: Compatible with ALMA™-controlled external DSP environments and line-level system calibration workflows.

Accessory Spotlight for the DAS Audio EVENT-212.120A

• DAS Audio AX-COMBOEV1210: Rigging adapter that integrates EVENT-212.120A cabinets with EVENT-210A or EVENT-212A enclosures. Ideal for mixed-array flown systems—finished in black, 15.0?kg (33.0?lb).
• DAS Audio AX-EV212: Rigging bumper for EVENT-212.120A arrays, supporting up to 16 cabinets per cluster. Finished in black and weighing 32.0?kg (70.4?lb).
• DAS Audio AXS-EV212: Stacking bracket for the DAS Audio EVENT-212.120A, designed for securely placing up to four units on top of EVENT-218A subwoofers or ground platforms. Enables safe, stable ground-stacked deployments in live sound or touring systems.
• DAS Audio PICKUP-AX-EV212: Auxiliary pick-up bar enabling dual suspension points when used with the AX-EV212 bumper. Improves weight distribution and rigging precision in flown arrays.
• DAS Audio PL-EV212S: Heavy-duty steel transport dolly designed for up to four EVENT-212.120A cabinets. Built for fast load-ins and safe transit of pre-rigged line array stacks.

Control modes of the Event-212A powered array cabinet

The Event-212A is equipped with DAScontrol™, a rear-panel DSP management interface designed for rapid field configuration without the need for external software. This interface gives engineers access to array-size presets, delay alignment, high-pass filters, and mode switching directly on the back of the unit. It's designed to speed up deployment without compromising precision, especially in multi-cabinet flown arrays where consistency is critical.

At the core of the system are FIR-filtered voicing curves optimized for different array sizes and splay angles. These presets are accessed via the integrated LCD screen and rotary encoder, allowing system techs to account for the number of boxes per hang and fine-tune response based on room reflections, throw distance, or flown/stacked positioning. Adjustable input gain and signal loop-thru management give full control over array behavior in both symmetrical (stage left/right) and asymmetrical configurations.

When expanded with the optional DAS INTEGRAL-M26X processor, the Event-212A can be networked via ALMA™ software for complete preset management, delay matrices, group EQ control, mute zoning, and full system recall. However, for most ground-stacked or flown applications, the onboard DSP already includes:

• Array-size presets: Match system behavior to the number of cabinets in a flown configuration to ensure vertical coherence and phase accuracy.
• Delay alignment: Adjust cabinet delay to match subwoofer placement or compensate for staggered hangs in multi-point setups.
• High-pass filter control: Activate and tune crossover points for clean integration with subwoofers such as the Event-221A or Event-218A.
• Input sensitivity and gain: Configure front-end gain structure to match consoles, matrix processors, or direct controller outputs.
• Thermal and peak protection: Onboard DSP monitoring of amp behavior to protect components without cutting signal under performance load.

These tools make the Event-212A equally suitable for fixed installations, fast-paced festivals, or touring fly dates where consistent system response and minimal tuning time are essential. Whether you're deploying four boxes per side or sixteen, DAScontrol™ delivers the control depth and reliability expected in top-tier line array systems.

How to deploy the Event-212A in the field

The Event-212A is designed from the ground up for fast, secure, and repeatable deployment in both flown and ground-stacked configurations. Its captive rigging system features quick-lock aluminum hardware integrated into each cabinet, allowing for seamless vertical stacking and precise splay angle control. Whether you’re flying 12–16 units per side or assembling 4-cabinet stacks on subwoofers, the hardware allows system techs to build consistent arrays with minimal calibration time on site.

When flown, the Event-212A is typically paired with the AX-EV212 rigging frame, supporting up to 16 units with safety-certified load ratings. The splay angle between boxes is user-defined using rear-angle guides and front-pin locking mechanisms, ensuring accurate vertical dispersion and phase alignment. For outdoor festivals or large auditorium installs, symmetrical arrays are flown stage left and right, with each hang configured based on throw distance and audience geometry. DAScontrol™ presets simplify this process by allowing engineers to select the number of cabinets in the array and automatically apply FIR compensation filters for optimized coverage.

In ground-stacked mode, the Event-212A pairs with subwoofers such as the Event-218A or Event-221A using pole adapters or dolly platforms. Ground-stacked arrays can consist of up to four Event-212A cabinets angled progressively upward to cover medium-sized venues while maintaining focus and impact. Built-in DSP delay functions allow time alignment between the top cabinets and the front row without requiring external processing.

Cabling topology follows a clean XLR signal and powerCON AC structure. Signal is looped from the top cabinet down the array, with each unit’s DSP maintaining gain and filtering integrity. All presets—including delay, voicing, and crossover alignment—remain intact even when looped, preserving system behavior throughout the chain.

Amplifier architecture of the Event-212A

The Event-212A uses an integrated three-channel Class D amplifier platform designed to deliver discrete, high-efficiency power to each transducer group: low-frequency, mid-frequency, and high-frequency. Unlike conventional bi-amped designs, this tri-amp topology ensures that both 12" woofers, the MF section, and the HF compression driver each receive precisely tuned voltage and current under the control of internal DSP. This separation maintains consistent phase integrity across crossover points and prevents transient collapse during high SPL playback.

Total output is rated at 1,500 W peak power, with distribution optimized for real-world driver load. Each LF section receives up to 600 W peak, while the HF path is supplied with 300 W peak. The amplifier utilizes a switch-mode power supply (SMPS) to maintain stable operation across variable mains conditions—a critical factor in festival environments or venues with long power runs. Thermal behavior is managed via convection and intelligent DSP monitoring—no internal fans are required, keeping the cabinet noise-free and reducing long-term maintenance needs.

Protection is DSP-managed and includes multi-band limiting, thermal rollback, and short-circuit shutdown protocols. These do not simply mute output—they intelligently scale and protect the system in real time while preserving headroom and sonic integrity.

Auto-switching voltage detection allows the amplifier to operate safely on both 115V and 230V systems. Combined with high SPL output, dynamic efficiency, and transparent limiting behavior, this amp section is built for serious load, long days, and no-compromise sound delivery.

Digital signal processing in the Event-212A

The Event-212A features a high-resolution internal DSP engine designed to control all aspects of system performance—including crossover behavior, time alignment, output protection, and voicing presets—without the need for external processors. At the heart of this system is DAScontrol™, a rear-panel LCD interface with a rotary encoder for accessing field-ready configuration tools.

Core DSP functionality includes FIR-filtered crossover networks between LF, MF, and HF sections, ensuring linear phase and phase-coherent performance. Cabinet-count presets allow the system to self-correct based on the number of boxes in a flown array. Internal delay control enables alignment with subwoofers or staggered cabinets without rack gear or software.

Voicing modes are preset for stacked or flown usage, with specific filter behavior tailored to vertical coverage, throw distance, and physical splay angles. Input gain structure, polarity inversion, and high-pass filter settings are all adjustable via the onboard interface, giving engineers control without requiring a laptop.

Expanded Processing: DAS Audio INTEGRAL-M26X

The DAS Audio INTEGRAL-M26X is a rackmount 2-in/6-out digital signal processor that extends control and optimization for any DAS Audio system. Designed for both fixed installs and touring applications, it offers unmatched signal routing, alignment, and remote control across complex deployments.

• ALMA™ Control: Full networked control via PC/Mac and mobile apps using DAS Audio's ALMA software.
• FIR-Capable Filtering: Linear-phase crossover control with 48 dB/oct options and preset libraries for EVENT, ARA, VANTEC, and more.
• Install-Ready I/O: Balanced XLR connections, GPIO triggers, and support for OSC and RS-232 protocols.

Every INTEGRAL-M26X deployment is backed by DAS's official preset libraries—ensuring phase-coherent, FIR-tuned results across EVENT and VANTEC systems.

Recommended System Pairings for EVENT-212.120A

• DAS Audio EVENT-218A Powered Subwoofer: Dual 18 inch powered subwoofer with 3600W peak output—ideal for ground-stacked or flown deployment beneath the EVENT-212.120A in high-SPL environments.
• DAS Audio INTEGRAL-M26X Digital Signal Processor: 2-in/6-out FIR-optimized DSP with ALMA™ remote control and venue-ready presets. Perfect for tuning EVENT-212.120A arrays in install or touring applications.
• Pioneer DJ DDJ-FLX10 Controller: Four-deck rekordbox and Serato controller with stems, part FX, lighting mode, and pro-level build—ideal for DJs headlining with the EVENT-212.120A system.
• Pig Hog PHM25 25ft XLR Cable: Heavy-duty, tour-grade XLR cable designed for clean, balanced signal between subs, tops, and DSPs in EVENT-series configurations.
• Mic Flow U80 UHF Dual Wireless System: Reliable dual handheld UHF mic system with up to 1000 ft of clean transmission—perfect for mobile MCs or stage use with EVENT-212.120A rigs.

Why choose the Event-212A from AVMaxx?

At AVMaxx, we don’t just list the Event-212A—we stand behind it with expert guidance, real deployment knowledge, and support tailored to professional users building high-performance sound systems. Our clients include production companies, club owners, touring engineers, and integrators who rely on line array gear that works flawlessly under pressure. When you buy from AVMaxx, you get more than just the cabinet—you get access to workflow insight, preset recommendations, and field-tested configuration strategies from people who deploy these systems daily.

We understand that the Event-212A isn't an entry-level speaker—it's a serious tool for serious coverage. That’s why we offer pairing consultations, rigging guidance, and DSP alignment support to ensure you get the most from your investment. Whether you're flying 16 cabinets per side or building a scalable club install, our team can help you design and configure an array that performs to spec, day after day. And with exclusive pricing on accessories, frames, and subwoofer bundles, we help you scale your system intelligently without compromising quality.

AVMaxx is trusted by sound professionals nationwide because we deliver more than boxes—we deliver systems that work. If you’re ready to elevate your sound infrastructure with a true flagship array, the Event-212A belongs in your rig—and we’re here to make sure it’s done right.

When you're investing in a system this advanced, you deserve gear that delivers—and a partner who understands how to deploy it. AVMaxx is that partner.