Take full-room coverage further with the DAS Audio Event-212.120A
The DAS Audio Event-212.120A is the wide-dispersion sibling of the flagship 212A, offering a 120º horizontal throw pattern optimized for venues that demand broader audience coverage without sacrificing clarity or output. Featuring dual 12" LF drivers in a dual-band configuration, a single 1.5" M-75 compression driver, and a tri-amplified Class D platform delivering up to 3,000 W peak, this 3-way powered line array cabinet brings massive system output to live DJs, touring rigs, and permanent installs where lateral spread is critical.
Internally, each 12" driver is tuned to a specific frequency range and powered by its own amplifier channel, maximizing system efficiency and reducing distortion. The horn-loaded HF driver is mounted to the purpose-built BPS-120EV00 waveguide, delivering clean and even response across wide room layouts. With DAScontrol™ on the rear panel, engineers can recall cabinet count presets, delay settings, throw compensation, and voicing curves without external software. Whether flown in large symmetrical arrays or stacked on subs for high-density club zones, the Event-212.120A is purpose-built to fill space with definition and impact.
Where performance meets wide-field clarity
- 120º horizontal dispersion: Wide coverage pattern delivers balanced sound across wide dancefloors, shallow venues, or wide festival stages.
- Dual-band LF architecture: Each 12" woofer operates in a distinct frequency range, maximizing punch and minimizing comb filtering.
- 3-channel Class D amp module: Powers LF, MF, and HF drivers independently with 1000 W peak per path and onboard thermal protection.
- DAScontrol™ FIR DSP: Rear LCD interface with presets for array size, splay angle correction, delay tuning, and crossover management.
- Tour-grade cabinet: ISO-flex coated birch plywood enclosure with captive rigging system, ergonomic handling, and road-tested durability.
Real-world applications and sound roles
The Event-212.120A is ideal for high-energy DJ stages, packed club installs, and concert zones where wide lateral coverage matters more than vertical throw depth. Use it to cover shallow-depth arenas, large open warehouse spaces, or side-fill zones in wider-than-usual venue builds. Its 120º waveguide ensures that audience members at the edge of the venue get the same fidelity and SPL as those in the center, while FIR DSP and DAScontrol™ allow for fast setup, stacked or flown. From DJ rigs to distributed PA designs, this is the solution for when wider really is better.
Where the Event-212.120A excels
- Wide-throw venue coverage: Perfect for theaters, nightclubs, and distributed dancefloors where consistent sound across a 120° spread is required.
- Shallow-depth and low-ceiling spaces: Optimized for venues where vertical stacking height is limited but wide horizontal dispersion is critical.
- Front-row festival coverage: Provides clean edge-to-edge sound in nearfield zones where standard 90° arrays leave dropouts at the wings.
- Club and DJ tour rigs: Built to deliver punch, clarity, and SPL in high-density rooms without hotspots or sweet-spot-only response.
- Multi-zone array compatibility: Easily deployable as a side-fill, front-fill, or mirrored main in hybrid systems using 90° and 120° cabinets together.
Accessory Spotlight
-
DAS Audio AX-COMBOEV1210 Combo Flybar & EV12/10 Array System: A versatile flybar-and-array kit combining the AX-EV1210 flybar with two EV12/10 modules for rapid-deploy line-array setups. Built from high-tensile, powder-coated steel, it offers precise splay angles up to 10° with load-rated pins and integrated safety lugs—perfect for mobile DJs and rental houses seeking a portable yet pro-grade rigging solution.
-
DAS Audio EVENT-218A 3200W Dual 18? Powered Subwoofer: Delivers earth-shaking low end via twin 18? high-efficiency woofers driven by a 3200 W peak Class D amplifier. Onboard FIR-filtered DSP ensures razor-sharp time alignment and crossover, while cardioid presets tame rear SPL by up to 15 dB. With 143 dB max SPL and Neutrik speakON® plus locking powerCON TRUE1® connectors, it’s built for the demands of professional touring rigs.
-
DAS Audio FUN-4-EV212 Protective Cover for EVENT-212A: The OEM cover for up to four EVENT-212A cabinets on the PL-EV212S dolly. Marine-grade polyester, reinforced industrial stitching, and integrated foam padding shield against scratches, moisture, and dust. Full-length sealed zippers and adjustable compression straps ensure a snug, protective fit on every load-in and load-out.
-
DAS Audio PL-EV212S Transport Dolly: Heavy-duty steel dolly with four 360° locking swivel casters, rated up to 500 kg. Powder-coated frame resists corrosion, while low-profile wheel housings and ergonomic handles enable effortless movement of stacked EVENT-212A or EVENT-212.120A modules across any stage or transit environment.
-
DAS Audio AXS-EV212 OEM Extension Bar for EVENT-212A: Powder-coated, high-strength steel extension bar that mates perfectly with the AX-EV212 flybar. Precision-machined pin holes and load-rated hardware maintain factory safety margins while offering expanded curvature options—ideal for tailoring array splay in challenging install scenarios.
-
DAS Audio PICKUP-AX-EV212 Pickup Bar for AX-EV212 Flybar & EVENT-212A Arrays: High-strength alloy steel pickup bar with precision-cut load points and anti-corrosion powder-coat finish. Rated for multi-cab suspension, it guarantees optimal balance geometry and consistent hang angles. Quick-release locking pins and ergonomic attachment lugs streamline rigging workflows for touring or installed arrays.
Control modes of the Event-212.120A powered array cabinet
The Event-212.120A features the DAScontrol™ DSP interface, a rear-panel LCD system with rotary control that gives engineers access to all key cabinet-level parameters without requiring external software. This control mode is essential when deploying multiple wide-dispersion cabinets in flown or stacked configurations, especially when precision throw behavior and voicing consistency are required across wider zones.
The system’s FIR-based DSP engine is accessible through this interface and includes factory-calibrated presets for array size, throw distance, and high-frequency compensation. Technicians can select how many cabinets are in a vertical hang, and the DSP will apply FIR filters and time alignment corrections accordingly. This ensures even response across 120° of horizontal coverage, minimizing lobing and phase issues commonly associated with wide-format waveguides.
- Array-size presets: Automatically adjust time alignment and phase response for arrays of 4–16 cabinets.
- Splay angle compensation: Built-in correction for stacked or flown configurations using varied mechanical angles between boxes.
- Subwoofer alignment: Delay filters ensure tight coupling when pairing with Event-121A or Event-218A subwoofers.
- Input gain and signal control: Set gain structure and loop-thru behavior to suit mono or stereo split systems.
- Thermal and limiter protection: DSP-controlled behavior maintains safe system performance under long-term stress or elevated ambient temperatures.
For expanded DSP routing, EQ memory, and full software integration, the Event-212.120A pairs with the INTEGRAL-M26X processor, allowing control via ALMA™ over IP. But in most standalone or semi-modular deployments, DAScontrol™ offers everything required for consistent voicing and safe, repeatable tuning in the field.
How to deploy the Event-212.120A in the field
Deployment flexibility is a core strength of the Event-212.120A. Thanks to its captive rigging system and wide dispersion profile, this cabinet is particularly well-suited for flown arrays in low-ceiling venues or for ground-stacked use where width coverage is prioritized over vertical reach. It can be deployed in symmetrical hangs of up to 16 units per side or used in hybrid arrays that combine 120° and 90° waveguide models to cover both front and side seating zones.
The cabinet locks into array configurations using the AX-EV212 rigging frame and pin-based splay angle guides. Engineers can build arrays in under 30 minutes with preselected angle stops and fly-ready front brackets. Ground-stacking is also fast—cabinets can be directly mounted on top of Event subwoofers using dolly plates or pole mounts, preserving the 120° horizontal field while projecting clean mid-high content above crowd level.
Power and signal loop neatly from box to box using rear-mounted powerCON and XLR connectors. The onboard DSP preserves filter settings across every cabinet in the chain, ensuring voicing remains consistent no matter how many units are deployed. Whether you're covering a shallow-depth venue, a wraparound nightclub, or a side-fill zone at a festival, the Event-212.120A deploys quickly, locks securely, and performs predictably in real-world conditions.
Amplifier architecture of the Event-212.120A
The Event-212.120A houses a tri-amplified Class D amplifier module capable of delivering 3,000 W peak power across three discrete output paths. Each transducer group—low-frequency, mid-frequency, and high-frequency—is independently powered and optimized through the onboard DSP, ensuring full-bandwidth performance with minimal distortion.
The amplifier is supported by a high-efficiency SMPS (switch-mode power supply) that adapts automatically to 115V or 230V systems. At full load, the cabinet draws 3.6A at 115V—well within the limits for field power distro setups and stage drops. Thermal management is handled through convection cooling combined with DSP-monitored rollback routines. If temperatures rise above safe thresholds, the amp will reduce output gently rather than shutting down, protecting performance during extended DJ sets or high-SPL concert segments.
All critical protection circuits are built into the DSP layer. These include multi-band limiting, short-circuit detection, peak voltage clamps, and overcurrent handling—all designed to safeguard the amp and drivers in high-stress situations. This ensures consistent operation across tours, rentals, and installs without risking driver fatigue or shutdown during performance-critical moments.
Digital signal processing in the Event-212.120A
The Event-212.120A integrates a high-performance DSP engine centered around DAScontrol™, giving engineers and installers direct access to all system tuning parameters at the rear of the cabinet. This includes cabinet count selection, splay compensation filters, HF throw correction, delay tuning, and subwoofer crossover setup—all without a laptop or external controller.
FIR filters govern the crossover networks between LF, MF, and HF sections, providing linear phase alignment and consistent impulse response. The result is transparent mid-high imaging, tight low-frequency performance, and seamless tonal balance across 120° of horizontal coverage. These filters automatically adjust based on array size and splay angle presets, ensuring that multi-box arrays behave like a single coherent source.
All settings made through DAScontrol™ are retained internally. Delay times can be set on a per-cabinet basis for accurate alignment. For more complex systems, the cabinet supports external control via the optional INTEGRAL-M26X processor, unlocking ALMA™ software access, scene memory, and full multi-zone routing.
Smart DSP tools like these allow DJs and engineers to shape, protect, and optimize their system in real time—without external software.
Perfect Pairings for the DAS Audio EVENT-212.120A
- DAS Audio EVENT-115A: Extend your flown system's low-frequency output with this matching powered subwoofer—perfect for ground-stacked reinforcement under the EVENT-212.120A line array.
- DAS Audio EVENT-118A: Add deep, high-output bass to your touring rig with this 18 inch powered subwoofer. Designed for optimal coupling with EVENT Series tops in both stacked and cardioid setups.
- CDJ-3000 with Case Solo Bundle: Pair your EVENT-212.120A PA with this club-standard Pioneer DJ player for a reliable front-end signal chain. Includes road case for secure transport to touring venues.
- ProX X-SPAM20X2PKG Set of 2 M20 Threaded Sub Poles: A heavy-duty pair of 20 inch speaker poles with steel construction, M20 threaded bases, 1 3/8 inch adapters, and safety pins—ideal for stacking EVENT Series tops above powered subs. Includes a zippered carry bag.
- Pig Hog PHM100: Ensure clean, balanced signal over long distances with this 100-foot tour-grade XLR cable. Rugged enough for festival stages, installs, or arena patch runs.
- Chauvet DJ GigBAR Move + ILS: Complete your front-of-house setup with this all-in-one lighting system. It delivers wash, beam, strobe, and laser effects synced to your performance.
Why choose the Event-212.120A from AVMaxx?
When precision coverage and real-world deployment control matter, AVMaxx delivers the Event-212.120A with the hands-on support and system insight serious audio professionals demand. Our clients aren’t just buying boxes—they’re building complete solutions for crowded nightclubs, low-profile stages, and wide-format festival setups. We help you get it right the first time with spec-verified guidance, real-world rigging strategies, and hardware pairing suggestions that match your specific use case.
Whether you're flying 120° boxes as mains in a club, using them as side-fills in a larger DAS rig, or stacking them over dual 18" subs for a mobile EDM rig, we understand what you're building. We’ve supported touring engineers, church integrators, and venue techs nationwide with consultation, DSP alignment help, and quick-ship availability when it counts. If you need wide horizontal clarity without compromise, the Event-212.120A belongs in your rig—and AVMaxx is your partner for making it happen.
Frequently Asked Questions
What’s the difference between the 212A and the 212.120A?
The 212.120A features a 120° wide-dispersion waveguide, while the standard 212A uses a 90° pattern. Choose the 120A when you need broader horizontal coverage across shallow-depth or wraparound venues.
Is the 212.120A suitable for DJ events and wide club rooms?
Yes—its wide horizontal pattern and high SPL output make it perfect for large dancefloors, wide stage zones, and nearfield crowd coverage in high-energy DJ applications.
How do I control DSP settings without software?
The rear-panel DAScontrol™ interface includes all major presets and delay parameters. For advanced routing, EQ memory, and remote control, pair with the INTEGRAL-M26X and ALMA™ software.
Do I need external amplification?
No. The Event-212.120A includes a tri-amplified Class D power module with 1000 W peak per channel—fully self-powered and DSP managed for field deployment.
When your coverage requirements are wide and your standards are high, the Event-212.120A delivers clarity, power, and control—ready to fly, only at AVMaxx.
