DAS Audio EVENT-118A Powered Subwoofer with DSP

Deliver Tour-Class Low End with the DAS EVENT-118A

The DAS Audio EVENT-118A is a front-loaded, high-efficiency powered subwoofer built to anchor the low end of the EVENT Series line array system. Designed for scalable deployment in live, club, and install environments, it delivers clean, extended bass down to 35 Hz with peak SPLs reaching 134 dB. A long-excursion DAS 18FWN driver and 2,000W Class D amplifier deliver the headroom and punch required for serious sound reinforcement.

Whether flown in directional mode or ground stacked under EVENT-212A or EVENT-208A tops, the EVENT-118A offers seamless integration through DAScontrol™—a rear-panel interface with presets for polarity, crossover, delay, and gain. Internal DSP applies factory FIR filters for clean top-to-sub alignment without requiring third-party control software. With support for cardioid configuration, it’s equally suited to high-pressure club installs or outdoor festival stages where rear rejection is critical.

Performance Highlights

• 2,000-watt peak Class D amplifier with switch-mode power supply for maximum output and thermal efficiency.
• Front-loaded cabinet with DAS 18FWN long-excursion driver delivers tight, defined sub-bass across the 35–125 Hz range.
• Selectable delay and polarity options enable cardioid subwoofer configurations without external DSP gear.
• Factory presets ensure seamless alignment with EVENT Series tops including the 208A and 212A.

DSP & Control Interface

• DAScontrol™ rear LCD interface provides direct access to delay, crossover, gain, and polarity settings.
• FIR filtering ensures linear-phase response and precise timing with matched EVENT Series enclosures.
• Built-in presets cover ground stack, flown, and cardioid deployment modes with no software required.

Build & Connectivity

• 18 mm birch plywood enclosure with ISO-flex touring paint stands up to the demands of rental and live event work.
• M20 pole socket and integrated rigging points allow for both stacked and flown configurations.
• Dual XLR input/output and locking powerCON AC loop-through for simple signal and power distribution across subs.

Real-World Applications and Sound Roles

The EVENT-118A is designed for system techs, rental companies, and venue integrators who demand low-end performance without complexity. Ground stack two or more under flown arrays for punchy, concert-level bass. Deploy in cardioid mode to reduce stage wash in DJ booths or live performance environments. Integrate seamlessly with EVENT tops for modular builds that scale from corporate installs to main stage rigs. From mobile event setups to permanent high-SPL rooms, the EVENT-118A delivers low-frequency control with the muscle to match.

Where the DAS EVENT-118A Excels

• Festival sub lines where directional control is critical and cardioid or end-fire arrays must be deployed without rack DSP.
• Club installations that demand deep, punchy bass reinforcement with clean integration into flown EVENT-208A or 212A systems.
• Touring sound rigs where rugged construction, fast deployment, and consistent low-end output are non-negotiable.
• Mobile DJ systems needing scalable sub-bass that can be stacked, paired, or cardioid-arrayed on short notice.
• Theatrical and AV environments where sub-bass coverage needs to be consistent, aligned, and easy to configure in small crews.

Accessory Spotlight for the DAS Audio EVENT-118A

• DAS Audio AX-EV28 Rigging Bumper for EVENT-208A — Suspension bumper for flying up to 16 EVENT-208A modules in vertical arrays above the EVENT-118A. Official net weight is 11.5 kg (25.3 lb).
• DAS Audio AXC-ZT-1 Pole Mount Adapter — Converts the EVENT-118A’s M20 thread into a 35mm mount point for deploying EVENT-208A or other tops via sub pole or tripod stand. Compatible with AXS series rigging.
• DAS Audio AXS-EV28 Stacking Bracket — Designed for stacking EVENT-208A modules on top of the EVENT-118A with precise vertical alignment and secure coupling. Ideal for ground stack arrays.
• DAS Audio JP-EV28 Joining Plate — Structural joiner plate for linking EVENT-208A and EVENT-118A cabinets in multi-box flown or ground-stacked arrays. Maintains rigging integrity across modules.
• DAS Audio PL-EV118S Transport Dolly — Black touring dolly built to move up to two EVENT-118A subwoofers safely. Reinforced frame ensures transport reliability on or off the road.

Control Modes of the DAS EVENT-118A Powered Subwoofer

The EVENT-118A includes the DAScontrol™ DSP interface, designed to give system techs fast, field-friendly access to all key subwoofer parameters—no software or laptops required. The rear LCD and rotary dial allow for quick selection of polarity, delay, gain, and crossover settings, each tailored for integration with EVENT Series tops or custom setups.

• Built-in delay control makes it easy to time-align multiple subs or configure cardioid arrays with front-to-rear cancellation.
• Selectable crossover points match the EVENT-208A and EVENT-212A perfectly, reducing tuning time and improving low-end cohesion.
• Polarity reversal and gain trim give technicians precise control over phase and level in mixed systems or stacked deployments.
• Preset logic includes factory-aligned modes for stacked, flown, and cardioid configurations with consistent voicing and FIR filtering.

All settings are stored internally and remain locked to the cabinet, so subs retain their behavior when daisy-chained or power-cycled. With DAScontrol™, the EVENT-118A adapts to the demands of any deployment without slowing down setup or requiring outboard gear.

How to Deploy the DAS EVENT-118A in the Field

The EVENT-118A is designed for fast, repeatable deployment in both stacked and flown configurations. Whether you're ground-stacking under line array tops or setting up cardioid sub lines, the enclosure and DSP are built to streamline the process.

• In standard rigs, place one or more EVENT-118A units directly beneath EVENT-208A or EVENT-212A tops using M20 pole sockets or dolly platforms.
• For directional setups, flip alternate cabinets, reverse polarity on the rear DSP, and apply delay to the forward-facing sub to create cardioid cancellation.
• Flown installations can use the rear rigging hardware to suspend the 118A behind or beside a line array hang when floor space is limited.
• Each cabinet’s DSP retains its settings when linked, allowing system techs to preconfigure subs and loop signal with XLR and powerCON pass-throughs.

With minimal setup time and no external processors required, the EVENT-118A slots cleanly into rental, production, and install workflows that demand sub-bass consistency across venues and configurations.

Amplifier Architecture of the DAS EVENT-118A

The EVENT-118A is powered by an integrated Class D amplifier delivering 2,000 watts peak and 1,000 watts continuous output. Designed for high-efficiency operation with minimal thermal load, it uses a switch-mode power supply (SMPS) to maintain consistent performance across variable voltage conditions.

• The amp feeds a single long-excursion 18FWN woofer with precision tuning and onboard FIR-filtered DSP to ensure phase-aligned sub performance.
• Thermal management is handled internally without active fans, keeping the system silent during operation and reducing wear in dusty or rugged environments.
• Protection circuitry includes multi-stage limiting, thermal rollback, and short-circuit shutdown to prevent damage without sacrificing headroom.
• Auto-ranging power input detects 115V or 230V sources and adjusts internally for global deployment without external voltage switching.

With consistent output, clean peak handling, and zero-compromise protection, this amplifier section is built for heavy use on the road or in fixed installations where reliability is non-negotiable.

Digital Signal Processing in the DAS EVENT-118A

The EVENT-118A features onboard DSP tailored to subwoofer performance, with factory FIR filters and preset logic that ensures smooth integration with the EVENT Series tops. All parameters are accessible directly from the rear-panel DAScontrol™ interface—no software or external hardware required.

• Built-in crossover options allow system techs to select precise cutoff points when pairing with EVENT-208A, EVENT-212A, or custom full-range cabinets.
• FIR filters maintain linear phase response between top and sub, preserving time alignment across multiple units and mirrored stacks.
• Cardioid-ready logic lets users set front/rear polarity and delay with a few turns of the encoder—ideal for stage-side or festival sub lines.
• Gain trim, polarity switching, and delay settings are stored per unit, ensuring consistent behavior across power cycles and daisy-chained configurations.

Designed for fast deployment and consistent tuning, the DSP system on the EVENT-118A gives audio engineers the tools they need to get clean, directional bass performance without relying on rackmount processors or external control systems.

Expanded Processing: DAS Audio INTEGRAL-M26X

The DAS Audio INTEGRAL-M26X is a rackmount 2-in/6-out digital signal processor that extends control and optimization for any DAS Audio system. Designed for both fixed installs and touring applications, it offers unmatched signal routing, alignment, and remote control across complex deployments.

• ALMA™ Control: Full networked control via PC/Mac and mobile apps using DAS Audio's ALMA software.
• FIR-Capable Filtering: Linear-phase crossover control with 48 dB/oct options and preset libraries for EVENT, ARA, VANTEC, and more.
• Install-Ready I/O: Balanced XLR connections, GPIO triggers, and support for OSC and RS-232 protocols.

Every INTEGRAL-M26X deployment is backed by DAS's official preset libraries—ensuring phase-coherent, FIR-tuned results across EVENT and VANTEC systems.

Recommended Pairings for the DAS Audio EVENT-118A

• Pioneer DJ DDJ-FLX10 4-Channel Controller — Drive the EVENT-118A with detailed low-end control and hybrid stems processing from this pro-grade controller. A perfect pairing for club-level sound systems and mobile event rigs.
• ProX XZF-DJCTBLCASEMK2 Control Tower DJ Podium — Compact DJ podium and integrated case solution for Pioneer DDJ-FLX10, DDJ-REV7, XDJ-XZ, or RANE Four. Pairs cleanly with EVENT-118A sub setups for polished stage aesthetics.
• Flow U80 Dual Wireless Microphone System — Reliable UHF vocal and speech solution for corporate installs and mobile productions using EVENT-118A subwoofers in distributed setups.
• Pig Hog PHM25 25-Foot XLR Cable — Heavy-duty XLR cabling for clean signal routing between your mixer and EVENT-series subwoofers. Tour-ready design with thick shielding and reinforced heads.
• Chauvet DJ GigBAR Move + ILS — Plug-and-play lighting for mobile DJs or corporate A/V setups running EVENT-118A subs. Ideal for all-in-one setups needing full-room coverage without truss.
• Chauvet DJ COLORdot ILS Compact Wash — Create accent lighting around stacked sub arrays or stage edges with this compact LED wash unit. Fully ILS compatible for synchronized light shows.
• ProX XGF-260BLK Matte Black Gaffer Tape — 2-inch wide, no-residue gaffer for securing XLR lines, anchoring sub cables, or blacking out exposed edges on your EVENT-118A setup. 60-yard roll.

Why Choose the DAS EVENT-118A from AVMaxx?

At AVMaxx, we don’t just carry the EVENT-118A—we deploy it, configure it, and stand behind it in the field. Our team supports production companies, mobile DJs, integrators, and installers who need low-frequency solutions that work right out of the box and scale fast under pressure.

• We provide real-world setup guidance for cardioid deployment, delay alignment, and crossover configuration with matched EVENT tops.
• Our staff can recommend ideal quantities, stacking patterns, and cable infrastructure to streamline your sub deployment strategy.
• Need to integrate with EVENT-208A or EVENT-212A tops? We’ve got tested presets and pairing plans ready to go.

Whether you're outfitting a club, upgrading a touring rig, or building a mobile stack that hits hard and tears down fast, the EVENT-118A delivers—and so do we. With AVMaxx, you’re not just buying boxes. You’re getting support from techs who’ve tuned these exact systems in the real world.