Chauvet DJ CLP-03: Steel Light-Duty C-Clamp for 1–2 inch Truss & Pipe
CLP-03 is a compact, steel C-clamp built for fast, reliable mounting of lightweight fixtures on 1–2 in (25–50 mm) truss or pipe. An adjustable hand knob speeds placement while the included M8 bolt (28 mm length, 1.5 pitch) secures the yoke. Despite its small footprint—4.2 × 2.2 × 3.3 in at just 0.5 lb—it carries a 39 lb (18 kg) vertical load rating, ideal for LED PARs, linear bars, and compact effects used by mobile DJs, clubs, and event pros.
Whether you’re building a clean DJ lighting tree, dressing a ballroom truss, or adding accent fixtures to a house pipe, CLP-03 balances durability with speed. Pair it with a rated clamp position on the fixture yoke and always add a secondary safety cable for best practice on any install.
- Real-World Applications & Rigging Roles: mobile DJ lighting trees, ballroom truss décor, club installs on house pipe, quick PAR/bar hangs for weddings and corporate events.
Where This System Excels
- Quick Mounting: Tool-free adjustable knob speeds placement and repositioning on show day.
- Broad Compatibility: Clamps securely to 1–2 in (25–50 mm) truss and pipe for common DJ and stage rigs.
- Durable Steel Build: Steel construction resists flex and wear for dependable, repeatable hangs.
- Light-Duty Sweet Spot: 39 lb (18 kg) vertical rating suits LED PARs, linear bars, and small effects—perfect for mobile DJ packages.
- Precise Hardware: M8 × 28 mm bolt with 1.5 pitch provides consistent grip on fixture yokes.
- Pack-and-Go Friendly: Compact 4.2 × 2.2 × 3.3 in, only 0.5 lb—carry multiples without loading out heavy.
- Safety-Forward Workflow: Encourages proper rigging habits; always add a rated safety cable and follow vertical-load orientation.
How to Deploy the CLP-03 C-Clamp
Goal: fast, secure mounting of lightweight DJ/stage fixtures to 1–2" (25–50 mm) truss or pipe using a compact, steel, light-duty clamp.
- Verify Load & Fit: Confirm the fixture’s total hang weight is = 39 lb (18 kg) and that your bar/truss OD is 1–2" (25–50 mm). The CLP-03 is rated for vertical loading—do not side-load.
- Inspect Hardware: Check the clamp body and threads for damage. Ensure the fixture yoke accepts an M8 bolt (CLP-03 uses M8 × 28 mm, 1.5 pitch).
- Seat the Clamp: Open the jaw with the adjustable knob, place the CLP-03 squarely on the truss/pipe, then hand-tighten until snug. Keep the clamp flat and fully seated on the tube.
- Attach the Fixture: Align the fixture yoke hole with the clamp’s mounting point and insert the M8 × 28 mm bolt (1.5 pitch). Tighten until the yoke is secure but can still tilt for aiming.
- Add Secondary Safety: Always connect a rated safety cable from the fixture to the truss/pipe as an independent backup.
- Aim & Balance: Center the fixture’s mass under the truss/pipe. Aim the light, then fully tighten the yoke and clamp knob. Re-check that the clamp remains fully seated.
- Cable Management: Route power/DMX with strain relief so cables don’t pull on the clamp or yoke. Keep runs tidy along the truss or stand.
- Final Checks: Confirm no movement when nudged, verify vertical-load orientation, and ensure surrounding fixtures/soft goods have clearance.
- Show Use: Periodically re-check tightness during long events or temperature swings, especially on mobile DJ lighting trees and club installs.
- Strike: Power down, disconnect cables, remove the safety cable, loosen the knob, and lift the fixture off the clamp before removing the clamp from the truss/pipe.
Best practice: Use one CLP-03 per mounting point for lightweight fixtures. For heavier heads or off-axis loads, select a clamp with a higher rating and appropriate form factor.
Why Choose AVMaxx for Your CLP-03 C-Clamp
Safety-first rigging, zero guesswork. AVMaxx helps DJs and techs mount lightweight fixtures correctly with the CLP-03’s verified specs—1–2" (25–50 mm) truss fit, 39 lb (18 kg) vertical load rating, and steel construction—so your PARs, bars, and compact effects stay secure show after show.
- Application-driven guidance: We match clamp selection to fixture weight, hang angle, and pipe/truss size—no “close enough” guesses.
- Hardware clarity: We verify M8 × 28 mm (1.5 pitch) bolt compatibility with your fixture yokes before you roll in.
- Fast, clean setups: Tips for clamp placement, knob access, and cable strain relief keep your trees and truss tidy.
- DJ-focused best practices: Proper vertical-load orientation and secondary safety cable routines built into your workflow.
- Only manufacturer-verified data: Dimensions, weight, and ratings are taken straight from the official spec—no estimates.
Bottom line: AVMaxx pairs the CLP-03’s durable steel build with proven rigging habits, so your mobile DJ or club install is safe, fast, and repeatable.
Frequently Asked Questions — CLP-03
What fixtures is the CLP-03 best for?
Lightweight LEDs such as PARs, linear bars, and compact effects that keep the total hang = 39 lb (18 kg) in a vertical-load orientation.
Will it fit my truss or pipe?
Yes, if your tube outer diameter is 1–2 in (25–50 mm). That covers most DJ lighting stands, pipes, and common box truss chords.
Which bolt size does the clamp use for the yoke?
The mounting bolt spec is M8 × 28 mm with a 1.5 thread pitch. Confirm your fixture yoke accepts M8 hardware.
Is the CLP-03 suitable for moving heads?
Use it only if the moving head’s total hang load and leverage meet the 39 lb vertical rating. For heavier or off-axis loads, choose a higher-rated clamp designed for the task.
What’s included with the CLP-03?
Per the official contents: Warranty card. Use appropriate M8 hardware and a rated safety cable per your fixture and venue requirements.
Tell us your fixture list, weights, and bar size—AVMaxx will validate load paths and spec the right clamps and safeties for a clean, compliant DJ rig.
