Chauvet Professional Rogue Outcast 1L Beam Fixture

Chauvet Professional Rogue Outcast 1L Beam: Ultra-Narrow IP65 Beam with Dual Gobos and Prisms

The Chauvet Professional Rogue Outcast 1L Beam is a fully IP65-rated LED beam fixture engineered for tour-grade performance in all weather conditions. It delivers a piercing 1.4° beam angle powered by a 140W cold white LED with over 50,000 hours of life expectancy. This precision fixture is optimized for long-throw aerial FX, prism layering, and outdoor event reliability, combining compact size with rugged magnesium/aluminum housing and full IP-rated connections. The beam engine is supported by a hybrid static and rotating gobo wheel, offering 14 metal gobos total (7 static, 7 rotating), plus indexing, slot-n-lock, and fast scrolling for show-ready morphing FX. The fixture also includes two independently controllable prisms—5-facet linear and 8-facet round—designed for layering and punch through haze. A motorized frost allows quick beam softening for abstract washes or ambient mid-air dispersion. Pan/tilt movement is fast and accurate, and RDM functionality ensures remote monitoring and addressability in complex systems. The Rogue Outcast 1L Beam also includes a USB-C software update port, selectable DMX personalities (17 or 19 channels), and an OLED menu interface for efficient field configuration.

• Real-World Applications and Visual Roles:
• • Festival-ready aerial FX beam with IP65 resilience
• • Compact club installs needing intense mid-air projection
• • Touring LDs demanding quick gobo/prism morphs
• • Outdoor architectural uplighting with clean beam field
• • Theatrical effects requiring slot-n-lock gobo interchange

Where This System Excels

• Outdoor Beam FX: IP65 rating with sealed optics and rugged diecast housing for festival stages, stadiums, and architectural installs.
• Rotating + Static Gobos: Dual gobo sets enable both morphing effects and locked-in texture projection with fast scroll.
• Prism Layering: Independently controlled 5- and 8-facet prisms create explosive beam multipliers for dynamic aerials.
• Quick Frost Conversion: Motorized frost transforms tight beams into soft-edged atmospherics instantly.
• Versatile Rigging: Compact 35 lb body mounts easily to truss or ground-supported setups using included Omega brackets.

Control Modes for the Rogue Outcast 1L Beam

The Rogue Outcast 1L Beam provides a robust and flexible control environment with support for **DMX** and **RDM** protocols, allowing remote monitoring and addressing across complex show networks. It features two selectable DMX personalities—**17-channel** and **19-channel modes**—to accommodate both streamlined and advanced programming needs. Control signals are delivered via **5-pin IP-rated DMX I/O**, ensuring reliable connectivity even in wet or dusty conditions. An **OLED display** paired with intuitive button navigation enables quick fixture configuration without external controllers. The fixture also includes a **USB-C port** for firmware updates, making long-term maintenance simple. RDM support provides remote access to critical fixture data like temperature, signal status, and DMX addressing—ideal for riggers and system techs managing large IP65 lighting networks.

Optical Output & Beam Engine of the Rogue Outcast 1L Beam

The Rogue Outcast 1L Beam is engineered for razor-sharp aerial FX with a 1.4° native beam angle and 160 mm front lens. Its high-efficiency 140W cool white LED produces 5,500 source lumens and delivers an impressive 224,670 lux at 5 meters, tightly concentrated for mid-air projection. A motorized focus mechanism enables remote sharpness control, ensuring gobo clarity regardless of zoom position or throw distance.

Field and cutoff angles remain tight at 1.7° and 1.8° respectively, preserving pinpoint accuracy for beam shows, mirror bounce hits, and FX tracking.

• LED Source: 140W CW, 50,000 hour life expectancy
• Native Beam Angle: 1.4° (field 1.7° / cutoff 1.8°)
• Output: 5,500 source lumens / 3,218 fixture lumens
• Lux at 5m: 224,670

DMX Mode Structure & Gobo Control

This fixture supports 17- and 19-channel DMX personalities with full RDM compliance for remote address and diagnostics. The fixture includes an integrated USB-C port for offline updates and profile loading.

Its advanced gobo system features a single hybrid gobo wheel loaded with 14 gobos total: 7 rotating and 7 static, all scrollable and interchangeable. Slot-n-lock capability enables gobo customization, while indexing and variable-speed rotation provide deep programming flexibility.

• 7 rotating gobos: Indexable, interchangeable, scrollable (metal)
• 7 static gobos: Fixed, scrollable at variable speeds (metal)
• Control Modes: 17ch (compact), 19ch (expanded)
• Gobo Size: 9.8mm outer, 5mm image, 0.6mm max thickness

Internal Effects Engine & Prism Layering

The Rogue Outcast 1L Beam offers an extensive onboard effects engine built for high-impact atmospherics. It includes dual motorized prisms—a 5-facet linear and an 8-facet round—designed for simultaneous or independent layering. When combined with motorized frost and strobe, the fixture transforms from beam precision to textured gobo FX or soft wash impressions.

The unit also supports Move-in-Black for seamless blackouts during position changes, while fast electronic dimming ensures smooth fade curves.

• 5-facet linear prism: Motorized, rotating
• 8-facet round prism: Motorized, rotating
• Motorized Frost: Smooth beam edge diffusion
• Shutter/Strobe: High-speed motorized
• Dimmer: Electronic, 0–100%
• Focus: Motorized remote focus

RDM Management & Fixture Intelligence

The Outcast 1L Beam is a fully RDM-enabled IP65 beam fixture with onboard diagnostic intelligence and tour-ready connectivity. Its aluminum/magnesium housing is rugged yet lightweight, and features a built-in GORE pressure-equalizing valve for wet/dry climate transitions. The OLED UI ensures fast navigation with both simple and complex DMX personalities available from the onboard menu.

• Protocols: DMX, RDM
• IP Rating: IP65 outdoor, with sealed 5-pin and Powerkon connectors
• User Display: High-contrast OLED with USB-C port for updates
• Temperature & Signal Feedback: Real-time via RDM

All internal DMX traits can be updated or monitored remotely, allowing fast deployment in large-format or hard-to-reach arrays.

How to Deploy the Rogue Outcast 1L Beam in the Field

The Chauvet Professional Rogue Outcast 1L Beam is designed for flexible deployment across both indoor and outdoor stages, thanks to its IP65-rated sealed housing and rugged die-cast construction. With a manageable weight of just 35.4 lbs and dual omega bracket mounts, this fixture supports multiple rigging strategies for beam-intensive productions.

• Truss Hanging: Use the included omega brackets with standard clamps for secure overhead mounting. Its lightweight chassis makes it ideal for single-point or multi-point arrays.
• Outdoor Structures: The IP65 rating enables placement on open-air grids or towers without requiring dome protection. All connectors are fully sealed.
• Beam Arrays: The narrow 1.4° beam and dual prism setup are optimized for high-density mid-air FX—position fixtures at staggered vertical intervals for multi-layer looks.
• Club Installations: For long-term rigs, the RDM functionality supports remote address and monitoring, while the pressure-equalizing GORE valve protects internals from climate shifts.
• Mobile Shows: The unit’s compact size and power efficiency (under 234W draw) make it suitable for truck-pack applications and quick-change touring setups.

Whether deployed on downstage truss for punch-through FX or on delay towers for open-air beam throws, the Outcast 1L Beam delivers elite performance and control in every rigging scenario.

Why Choose the Chauvet Professional Rogue Outcast 1L Beam from AVMaxx

At AVMaxx, we specialize in precision-grade beam fixtures that hold up to the rigors of real-world production—and the Rogue Outcast 1L Beam checks every box. This isn’t just a punchy 140W IP65 beam—it’s a professional-grade aerial effects tool built for festivals, towers, and fully mapped environments. From its tight 1.4° beam angle and dual rotating prisms to its hybrid gobo wheel and RDM functionality, everything is engineered for speed, definition, and detail.

We know deployment logistics because we deploy these fixtures ourselves. That’s why we stock this model with the correct PowerKon IP65 cabling, full DMX trait support, and production-ready pairing advice—whether you’re matching it with a Storm Series spot or building a lightweight tower beam grid.

When you buy from AVMaxx, you’re getting more than a light—you’re getting the right data, trusted rigging help, and a fixture that earns its place in every beam-heavy design.

Frequently Asked Questions

Can I use the Outcast 1L Beam outdoors without protection?

Yes. This fixture is fully IP65 rated and features sealed PowerKon and 5-pin DMX connectors, plus a GORE valve to equalize pressure in outdoor conditions.

Does this fixture have true layered prisms?

Yes. It includes both a 5-facet linear and an 8-facet round prism, and they can be layered together with variable speed rotation for complex aerial FX.

What makes this different from the Outcast 2 Beam?

The 1L Beam is lighter, more compact, and uses a 140W LED engine versus 300W in the 2 Beam. It retains the dual prism and gobo flexibility but with reduced power and size for tighter installs.

Can I address and monitor fixtures remotely?

Yes. The fixture supports RDM (Remote Device Management), allowing remote addressing, status checks, and diagnostics from supported consoles or nodes.

What’s included in the box?

Each unit comes with a 5ft Seetronic PowerKon IP65 cord and two Omega brackets with mounting hardware. IP-rated DMX and PowerKon jumpers are available separately.

The Rogue Outcast 1L Beam is your fast-track to mid-air texture, tight prism layers, and field-ready durability—rig it with confidence from AVMaxx.