Chauvet Professional COLORado Solo Batten: IP65 Pixel Batten for Seamless, Broadcast-Ready Washes
The COLORado Solo Batten is an all-environment network-controlled LED batten built for touring stages, television, and theatre where uniform color and precise control matter. A tightly integrated RGBAW engine produces a single-field wash with smooth fades and saturated looks, while the included wall-wash accessory converts the beam for wide scenic coverage. Camera-friendly dimming and a variable white preset range make it fast to match practicals and skin tones. Sealed power/data, rugged construction, and a password-protected OLED interface keep shows consistent from rehearsal to strike.
- Real-World Applications and Sound Roles
- Touring stage wash and set toning across truss lines
- Broadcast cyc/ground-row color that plays clean on camera
- Theatrical backlight, booms, and footlight runs
- Outdoor scenic and façade wall washing (temporary use)
- Pixel-mapped eye-candy chases for DJ façades and stage edges
Where the COLORado Solo Batten Excels
- Camera-Clean Color: Homogenized lensing creates even fields that read smoothly on IMAG and broadcast.
- All-Weather Reliability: Sealed power/data and IP-rated housing stand up to wet or dusty venues.
- Adaptive White: Onboard CCT presets speed white balancing for theatre and TV.
- Pixel-Ready Creativity: Multi-cell personalities unlock flowing chases and gradients without external processors.
- Fast Changeovers: Built-in and user-stored programs with recall keep festivals and rentals moving.
- Coverage on Demand: Native optic for punch; included wall-wash accessory for wide scenic floods.
- Network-First Rigs: Ethernet-based control with remote diagnostics for setup and service.
- Tour-Grade Power: Locking connectors streamline long batten lines and reduce changeover risk.
- DJ & Event Versatility: Scales from simple controller looks to pixel-mapped arrays.
Control Modes for the COLORado Solo Batten
Protocols & Interface
- Control: Ethernet lighting (Art-Net / sACN) plus 5-pin DMX; RDM supported for remote setup and status.
- User Interface: Large OLED with password lock to secure show settings.
- Data Connectors: Weather-sealed 5-pin DMX/RDM and etherCON for network control.
DMX / Network Personalities
Choose from thirty-seven profiles spanning 1-, 2-, 3-, and 12-cell layouts—scale from one-address operation to granular pixel mapping. Network channel structures mirror the DMX trait layout for straightforward Ethernet patching.
Dimming, Shutter & White Control
- Dimmer: Electronic with five selectable curves for theatrical fades or concert snaps.
- Shutter/Strobe: Electronic with a precise performance range for pulses and blinder-style hits.
- White Control: Wide CCT preset library for fast matching to practicals and camera references.
PWM & Video Optimization
- PWM: Six frequency options available—up to high-kHz operation for flicker-free cameras.
Standalone & Show Utilities
- Standalone Color Mixing: Create static looks from the fixture menu.
- Built-In Programs: Automated macros plus user programs with recall for repeatable cues.
Optics & Wall-Wash Filter Geometry of the COLORado Solo Batten
Out of the box, the Solo Batten uses an installed 18° optical system to deliver a tight, even field with no visible color separation. Native distribution measures 20° (H) × 16° (V) beam with a 34° (H) × 29° (V) field, producing up to 6,968 lumens and 3,870 lux at 5 m for punchy cyc lines and scenic toning. When wider, asymmetrical coverage is needed, the included wall-wash filter opens the output to a 37° (H) × 15° (V) beam and 63° (H) × 30° (V) field, yielding approximately 1,230 lux at 5 m—ideal for backdrops and façades. Use the supplied glare shield to control spill in audience-facing placements or ground-row applications.
RGBAW Color Engine & Variable White (1,800–8,000 K)
The engine comprises 144 × 3 W LEDs—24 red, 24 green, 24 blue, 24 amber, and 48 white—specified for a 50,000-hour life. This RGBAW array supports saturated primaries, smooth pastels, and accurate whites via onboard color temperature presets from 1,800 to 8,000 K. For fast looks, the fixture provides standalone color mixing, built-in automated programs, and user-programmable scenes with recall. Five selectable dim modes let you tailor fade response for theatrical cues, concerts, or corporate work.
Pixel Mapping Architecture & Personality Matrix
Scale from a single-address wash to granular segmentation with 37 personalities across 1-, 2-, 3-, and 12-cell layouts. Choose the channel footprint that fits your universe plan, then mirror the same structures over Art-Net or sACN for Ethernet workflows.
- 1-Cell: 3, 4, 5, 8, 8, 9, 10, 13, 16 ch
- 2-Cell: 6, 8, 10, 15, 15, 17, 19, 20, 30 ch
- 3-Cell: 9, 12, 15, 21, 22, 24, 27, 30, 43 ch
- 12-Cell: 36, 48, 60, 75, 85, 87, 99, 120, 160 ch
RDM enables remote addressing and mode changes, while the password-protected OLED interface secures settings once the rig is patched.
Video-Optimized Dimming, PWM & Strobe Control
To maintain clean imagery on cameras and IMAG, PWM frequency is selectable at 600, 1,200, 2,000, 4,000, 6,000, and 25,000 Hz. The electronic dimmer offers five curve options for low-end finesse or aggressive snaps, and the shutter engine delivers a precise 0–25 Hz range for pulses and blinder-style hits. The homogenized optics preserve color stability throughout fades from black to full.
IP65 Power/Data Connectivity & RDM/Network Management
For all-environment use, the bar features sealed connections end-to-end: Seetronic Powerkon IP65 power in/out, IP65 5-pin XLR for DMX/RDM, and IP65 etherCON for Art-Net and sACN. The auto-ranging supply (100–240 VAC, 50/60 Hz) supports power linking up to 4 units at 120 V or 8 units at 208/230 V to streamline long batten runs. An included 5 ft (1.5 m) locking power cord speeds load-ins, and RDM provides remote status/configuration so maintenance stays proactive.
How to Deploy the COLORado Solo Batten
Rigging & Physical Placement
- Clamp safely: Use two professional clamps on rated truss/pipe and add a certified safety.
- Balance the load: Space clamps to keep the unit level and maintain access to the OLED and I/O.
- Sightline control: Fit the included glare shield for ground-rows, footlights, or audience-facing positions.
- Orientation: Hang horizontal for cyc and set washes; rotate vertical for column accents and truss fascia.
- Filter use: Insert the wall-wash accessory for broad, asymmetrical scenic coverage; remove for tighter, punchier looks.
Power & Data Strategy (IP-Sealed)
- Power: Feed with the included locking cable; link additional units as permitted by the spec.
- DMX: Daisy-chain via sealed 5-pin; terminate the last fixture.
- Network: For pixel mapping or large arrays, run sealed Ethernet from your switch or node.
- Weather practice: Seat gaskets, cap unused ports, and add drip loops on all lines to preserve ingress protection.
Addressing, Modes & Lockout
- Select a profile: Pick a 1-, 2-, 3-, or 12-cell layout to match workflow—simple washes or granular pixel control.
- RDM setup: Use RDM to set address and mode remotely; confirm on the OLED.
- Secure settings: Enable the password lock after patching to prevent show-time changes.
Optics & On-Camera Setup
- Coverage choice: Native optic for throw and saturation; wall-wash accessory for wide scenic floods.
- Video optimization: Use a higher PWM option for IMAG/broadcast; lower values prioritize responsiveness for live-only rigs.
- White matching: Select CCT presets to align with practicals, skin tones, or camera white points.
Quick Deployment Recipes
- Pixel-Mapped Truss Line: Horizontal hang; link power within limits; Ethernet to console/network; choose a multi-cell profile; set high PWM; lock the OLED.
- Cyc/Backdrop Wash: Ground-row with glare shield; install wall-wash accessory; choose a simple profile for gradients; set a CCT preset to match the scene.
- Mobile DJ Façade: Vertical on T-bar or truss; simple DMX from controller; store a few user programs and use recall for fast changeovers.
COLORado Solo Batten vs COLORado Batten Q15 vs COLORado Batten 72X — IP65 LED Battens
| Model |
Light Source |
Optics |
Output |
CCT / PWM |
Control |
DMX Personalities |
Power / Linking |
Physical |
Environmental |
What’s Included |
| COLORado Solo Batten |
144 × 3 W RGBAW LEDs (50,000 hrs) |
18° installed
Beam: 20°H × 16°V
Field: 34°H × 29°V
With filter: 37–63° |
6,968 lm
3,870 lux @ 5 m (1,230 w/ filter) |
1800–8000 K presets
PWM: 600–25,000 Hz |
Art-Net, DMX, RDM, sACN |
37 personalities (1, 2, 3, 12-cell modes) |
336–339 W
Link 4 @120 V / 8 @230 V |
39.86 × 9.06 × 9.84 in
41.9 lb (19 kg) |
IP65, CE/MET/FCC
Temp: -4–113 °F |
Fixture w/ glare shield
Power cord
Wall washing filter |
| COLORado Batten Q15 |
15 × 20 W RGBW LEDs (50,000 hrs) |
16° installed
Beam: 15.5°H × 14.7°V
Field: 28.6°H × 28.1°V
With filter: 41.9–77.9° |
6,324 lm (5,547 w/ filter)
2,399 lux @ 5 m (653 w/ filter) |
1800–8000 K presets
PWM: 1,200–25,000 Hz |
DMX, RDM |
9 personalities (1-cell & 15-cell modes) |
194–197 W
Link 8 @120 V / 16 @240 V |
41.22 × 7.28 × 6.55 in
28.8 lb (13 kg) |
IP65, CE/MET/FCC
Temp: -4–113 °F |
Fixture
Power cord
2 Omega brackets
Base plate
2 retaining pins
2 safety cables
Glare shield & filter |
| COLORado Batten 72X |
72 × 3 W RGBAW LEDs (50,000 hrs) |
24° installed
Beam: 22°H × 18°V
Field: 39°H × 34°V |
3,631 lm
1,730 lux @ 5 m |
3200–10000 K presets
PWM: 600–25,000 Hz
CRI (3200 K): 80 |
DMX, RDM |
18 personalities (1-cell & 3-cell modes) |
161–164 W
Link 10 @120 V / 19 @230 V |
39.37 × 6.14 × 2.95 in
18.6 lb (8.4 kg) |
IP65, CE/MET
Temp: -4–113 °F |
Fixture
Power cord
2 Omega brackets |
Why Choose from AVMaxx
AVMaxx delivers more than a spec sheet—we deliver a clean, field-proven workflow for the COLORado Solo Batten. Our team configures pixel profiles, network routes, and on-camera dimming so your rig behaves predictably from rehearsal to show.
- Pixel strategy that fits your console: We map multi-cell layouts to your universe plan and showfile conventions, avoiding waste and bottlenecks.
- Broadcast-ready from the jump: Practical PWM and white-balance guidance for IMAG, streaming, and TV without guesswork.
- Weather-aware cabling: IP-sealed power/data practices (caps, drip loops, strain relief) that keep lines stable in wet or dusty environments.
- Fast load-ins, fewer touches: Power-chain planning and patch templates reduce setup time and backstage traffic.
- Real-world fixture tactics: Where to use the glare shield, when to switch to the wall-wash accessory, and how to keep sightlines clean.
- Manufacturer-verified data only: We build from official Chauvet Professional information you can trust.
Bottom line: With AVMaxx, you get confident deployment, clean looks on camera, and a rig that scales from simple washes to pixel-mapped lines without surprises.
Frequently Asked Questions — COLORado Solo Batten
What’s included in the box?
You receive the COLORado Solo Batten (with glare shield), the wall-wash accessory, and a locking, IP-sealed power cord for immediate setup.
Can I run it outdoors in bad weather?
Yes. It’s engineered for temporary outdoor/wet use. Keep unused ports capped, seat gaskets fully, and add drip loops on all lines.
Which control options does it support?
Use Ethernet-based control or 5-pin DMX; RDM is available for remote addressing and status. Multiple pixel profiles allow simple or segmented control.
What PWM setting should I use for cameras?
For IMAG/broadcast, select a higher PWM option to avoid rolling bands. For live-only shows, a lower setting can prioritize responsiveness.
How many fixtures can I link safely?
Follow the limits in the Technical Specifications and plan circuits accordingly. We can provide a chain layout for your plot.
Is it suitable for mobile DJs without a lighting console?
Yes. Choose a simple multi-cell profile for quick fades and chases, or use built-in/user programs with recall for fast changeovers.
When should I use the wall-wash accessory?
Use it for broad scenic floods and backdrops. Keep the native optic for tight, punchy lines and fascia highlights.
Send your room specs or plot—AVMaxx will recommend profiles, network routing, and cabling to make your Solo Batten line show-ready.
