Intimidator Road Case: Dual Fixture Protection for the Road
The Intimidator Road Case is purpose-built to safeguard your moving head fixtures from the relentless wear and tear of touring. Designed to hold two Intimidator units, this case features a tall lid so clamps and brackets can remain mounted—eliminating the need to constantly reattach hardware between gigs. A rugged metal hinge ensures the lid stays open when loading, while a dedicated front compartment keeps cables and accessories organized. Dual side handles simplify transport, stacking cups save floor space in storage, and locking casters prevent accidental movement during setup or travel. This case is the difference between constant re-rigging and true road-ready efficiency.
- Secure dual fixture housing with tall lid for clamp-on transport
- Integrated accessory storage compartment for cables, clamps, and brackets
- Durable touring design with stacking cups and locking casters
Built for DJs, production crews, and touring acts that demand rugged gear protection without sacrificing convenience.
Where This System Excels
The Intimidator Road Case shines anywhere reliability and speed of setup are priorities. By allowing brackets and clamps to stay attached, it slashes rigging time at every stop. In storage, its stacking cups maximize space efficiency, while the locking casters keep gear safely in place. From DJs navigating small clubs to rental houses loading festival rigs, this case ensures fixtures travel securely and setups stay streamlined.
- Touring professionals needing fast, repeatable setup and teardown
- Mobile DJs transporting Intimidators between clubs and events
- Production companies balancing storage efficiency with rugged protection
- Rental houses maintaining high fixture uptime and minimizing damage risk
Whether you’re rolling into a festival stage or securing gear in a crowded warehouse, this case excels at keeping Intimidators protected and ready for action.
Touring Deployment & Road Utility for the Intimidator Road Case
The Intimidator Road Case streamlines load-in, protects gear in transit, and speeds strike times across tight turnarounds. Its tall lid allows clamps and hanging brackets to remain installed, eliminating repetitive hardware changes between venues. A front storage compartment keeps cables, clamps, and spare brackets separated from the fixture bays for clean packing and faster access on site.
For transport, engage the locking casters to prevent drift on sloped docks and stage lips, then disengage for smooth rolling over flat concrete. The stacking cups on the lid accept matching feet from a second case, allowing safe vertical stacking to conserve floor space in trucks, warehouses, and FOH wings. Dual side handles support two-person lifts when navigating stairs or tight corridors.
Field Workflow Recommendations
- Pre-show: Leave clamps on fixtures; stage safety cables and two power leads in the front compartment to cut rig time at the truss.
- Load-in: Roll with casters unlocked on flat surfaces; lock wheels before opening the lid or lifting fixtures.
- Rigging: Lift each head directly from the bay to the stand/truss; brackets stay aligned, minimizing pan/tilt collisions during mounting.
- Strike: Coil cables into the front compartment; re-lock casters before closing the lid to avoid case creep.
- Storage/Truck Pack: Stack cases using the built-in cups; keep heavier inventory low and centered for balance.
Physical Specs & Compatibility
Dimensions: 20.2 × 21.2 × 32 in (514 × 540 × 813 mm) | Weight: 75 lb (34 kg) | Caster Size: 5 in (12.7 cm)
Compatible fixtures: INTIMSPOT360, INTIMSPOT360X, INTIMSPOT375Z, INTIMSPOT375ZX, INTIMBEAM355, INTIMBEAM360X, INTIMHYBRID140SR, INTIMBEAM140SR.
Designed for fast turnarounds and safer transport—this case keeps Intimidators protected, organized, and ready for the next show.
How to Deploy the Intimidator Road Case
The Intimidator Road Case was built with working crews in mind, ensuring deployment is as fast and efficient as possible. Whether you’re prepping fixtures for a corporate ballroom, a touring stage, or a mobile DJ rig, this case minimizes handling steps and protects your investment at every turn.
Step-by-Step Deployment
- Unload & Position: Roll the case into your prep area or stage edge. Engage the locking casters to stabilize before opening the lid.
- Open & Access: Swing open the rugged hinged lid. The tall design allows clamps and hanging brackets to remain attached, ready for immediate rigging.
- Retrieve Fixtures: Use the dual side handles for safe, two-person lifts when removing moving heads from the case bays.
- Rig & Connect: Mount fixtures directly onto truss or stands. Access power and DMX cables stored in the front compartment for quick hookups.
- Strike & Reset: After the show, return fixtures with clamps still attached, coil cables neatly in the storage bay, and re-secure the lid.
- Stack & Store: Take advantage of the stacking cups to vertically align cases in trucks or storage, saving critical floor space.
Pro Tips for Touring Crews
- Keep a small toolkit (safety cables, tape, wrench) in the front compartment to avoid scrambling during load-in.
- Always lock casters during load-out to prevent accidental rollaway on sloped ramps or stages.
- Stack lighter cases on top of the Intimidator Road Case when truck-packing for balance and security.
From rehearsal hall to main stage, the Intimidator Road Case makes deployment faster, safer, and more organized—reducing downtime and keeping your fixtures road-ready.
Why Choose the Intimidator Road Case
Choosing the Intimidator Road Case means investing in peace of mind for your lighting gear. This isn’t just another transport box—it’s a purpose-built solution for touring professionals, DJs, and rental houses who need their moving heads to arrive show-ready every time. With its tall lid design you never waste time removing clamps or brackets, and the stacking cups make tight storage or truck packs more efficient. Add in rugged construction, locking casters, and a dedicated cable compartment, and you get a case that works as hard as you do.
When reliability, efficiency, and protection are non-negotiable, the Intimidator Road Case is the professional’s choice.
Frequently Asked Questions
How many fixtures does the Intimidator Road Case hold?
The case is designed to securely hold two Intimidator moving head fixtures side by side with room for clamps to remain attached.
Which Intimidator models are compatible?
It fits models such as Intimidator Spot 360, 360X, 375Z, 375ZX, Beam 355, Beam 360X, Hybrid 140SR, and Beam 140SR.
Can clamps and brackets stay on during transport?
Yes. The tall lid design allows clamps and hanging brackets to remain attached, reducing setup and teardown time.
Is there storage for cables and accessories?
A front compartment provides space for cables, clamps, or brackets, keeping essentials organized and within reach.
Does the case prevent rolling during load-in?
Yes. It features locking casters that secure the case in place during loading, unloading, and setup.
The Intimidator Road Case is built to keep your fixtures protected and your workflow seamless—from warehouse to stage and back again.
