Chauvet DJ Hurricane Haze 2D Professional DMX Haze Machine

Chauvet DJ Hurricane Haze 2D: Continuous, Water-Based Haze with Precise Direction

Hurricane Haze 2D is a water-based haze machine designed for reliable, fine atmosphere that enhances lighting without overwhelming the stage. After a short 5-minute warm-up, it delivers continuous output to keep your rig show-ready. A front-panel digital display makes it easy to set DMX and stand-alone functions, while the adjustable blower speed and user-aimable output angle let you place haze exactly where it’s needed. A low-fluid indicator with auto shutoff protects the unit, and the included wired timer remote (with onboard storage) adds hands-free convenience.

• Real-World Applications and Roles:
• Mobile DJ light shows needing consistent, fine haze for beam definition.
• Clubs/venues enhancing moving light looks with even atmospheric coverage.
• Theater and corporate events requiring precise haze placement and control.

Where This System Excels

• Continuous Atmosphere: Emits steady haze after warm-up to keep looks locked in.
• Targeted Coverage: User-adjustable output angle aims haze exactly where you need it.
• Onboard Control: Digital display sets DMX and stand-alone functions without a controller.
• Output Tuning: Adjustable blower speeds tailor density and throw for the room.
• Show Protection: Low-fluid indicator with auto shutoff prevents dry runs and damage.
• Hands-Free Timing: Included wired timer remote adds convenient, repeatable bursts.

Control Modes

• DMX Control (2 channels, 3-pin XLR): Set DMX addressing via the digital display for integrated console control.
• Stand-Alone Mode: Use the front-panel digital display to adjust haze output and blower speeds—no external controller required.
• Wired Timer Remote (15 ft / 4.5 m): Schedule timed output and run convenient bursts; remote stores in the fixture for transport.
• Safety & Status: Low-fluid indicator automatically powers the unit down when the tank is empty to protect the heater.

Additional specs for reference in setup: 5-minute heat-up, 0.7 gal (2.5 L) tank, 1,200 cfm output, 8.2 ml/min consumption, 120 VAC 60 Hz, 533 W / 4.4 A.

Output & Fluid Management of the Hurricane Haze 2D

The Hurricane Haze 2D delivers reliable, water-based haze with tools to fine-tune placement and protect the machine during shows.

• Continuous Output: After a 5-minute heat-up, the unit provides steady haze for consistent looks.
• Adjustable Blower & Aim: Tune blower speed and set the user-adjustable output angle to direct haze where needed.
• Tank Capacity: 0.7 gal (2.5 L) internal reservoir supports extended operation with water-based fluid.
• Low-Fluid Protection: A low-fluid indicator with auto shutoff prevents running the tank dry.
• Output & Consumption: Rated 1,200 cfm with typical consumption of 8.2 ml/min for planning runtimes.

Digital Interface, DMX & Stand-Alone Operation

Front-panel controls and DMX integration make setup straightforward whether you run from a console or locally.

• Digital Display: Configure DMX functions and stand-alone settings from the onboard menu.
• DMX Connectivity: 2 DMX channels via 3-pin XLR for console control and integration.
• Stand-Alone Control: Adjust haze output and blower speeds directly from the display—no external controller required.
• Wired Timer Remote: Included remote (15 ft / 4.5 m) supports timed output and stores in the fixture when not in use.

How to Deploy

1. Power & Warm-Up: Connect to 120 VAC, 60 Hz (533 W / 4.4 A). Allow approximately 5 minutes for heat-up until continuous output is available.
2. Fill & Check: Fill the 0.7 gal (2.5 L) tank with water-based haze fluid only. Confirm the low-fluid indicator is off before operation.
3. Aim the Output: Set the user-adjustable output angle and dial in blower speed on the digital display to place haze where needed.
4. Choose Control: For console control, connect 3-pin XLR and set addressing for the 2-channel DMX mode. For local use, run stand-alone from the display.
5. Timed Bursts: Use the wired timer remote (15 ft / 4.5 m) for repeatable haze intervals; store it in the onboard compartment after use.
6. Monitor Status: Keep an eye on fluid level; the auto shutoff engages when the tank is empty to protect the unit.

Reference specs for planning: 1,200 cfm output, 8.2 ml/min consumption, size 11.2 × 10.5 × 13.7 in (285 × 267 × 350 mm), weight 18.7 lb (8.5 kg), approvals CE/MET.

Why Choose the Hurricane Haze 2D from AVMaxx

At AVMaxx, we understand that a haze machine is more than just an atmospheric effect—it’s the backbone of your lighting presentation. The Chauvet DJ Hurricane Haze 2D is chosen by professionals for its continuous output, DMX integration, and precise haze placement, all while being water-based for safe, residue-free operation. Our team has deployed this exact model in clubs, theaters, and corporate events, so we can guide you on the best practices to maximize coverage and fluid efficiency.

• Verified Performance: All specifications are confirmed from Chauvet DJ’s official data—no guesswork.
• Field-Tested Advice: We share deployment tips from real-world installs and touring use.
• Ready-to-Ship: Units are in stock with matching fluids and accessories for a complete setup.
• Trusted Support: Our staff knows both lighting design and haze optimization—help is only a call away.