Chauvet DJ Freedom Par Q9: TRUE-Wireless RGBA Uplight with Secondary Optics, Magnetic Diffuser & OLED Control
Cable-free color that sets fast: Freedom Par Q9 is a 100% TRUE wireless, battery-operated RGBA uplight with a built-in D-Fi transceiver for wireless DMX and a built-in RF receiver for handheld control (RFC / RFC-XL). Its new secondary optics deliver smooth, nearly artifact-free blends, while the magnetic diffuser snaps on to widen coverage in seconds.
Compact power, camera-clean output: A 9 × 6 W RGBA engine (50,000 hr) produces about 1,161 lumens and 3,580 lux @ 2 m (native). Optics are 12° beam / 35° field natively, or 37° / 68° with the diffuser (~529 lux @ 2 m). The 0–22 Hz strobe, built-in dimming curves, glare shield, and spring-loaded kickstand keep looks consistent and comfortable for guests and cameras.
Runtime profiles for real events: Choose 3 / 5 / 8 / 12-hour run-time modes from the full-text OLED, then recharge in about 3 hours. At just 4.6 lb and 4.7 × 4.7 × 4.9 in, the Q9 fits inside TRUSST® sticks for discreet installs and quick strikes.
- Real-World Applications & Lighting Roles:
- Wedding and corporate perimeter uplighting with warm amber mixes
- Architectural wall washes and truss warming in tight spaces
- Dancefloor ambience and scenic accents with diffuser-softened coverage
- Rental deployments needing fast, cable-free setup and handheld control
Where the Freedom Par Q9 Excels
- TRUE Wireless Workflow: Battery power plus D-Fi and RF handheld control removes power/data runs.
- Clean RGBA Blending: Secondary optics and a magnetic diffuser produce smooth, camera-friendly washes.
- Run-Time Planning: Selectable 3/5/8/12-hour profiles with ~3-hour recharge for predictable schedules.
- Compact Install: 4.7? square footprint fits inside TRUSST® for discreet, elegant placements.
- Comfort & Control: Glare shield reduces spill; kickstand sets uniform projection angles quickly.
- Flexible Control Options: D-Fi wireless DMX, RFC/RFC-XL handhelds, and optional FlareCON.
Control Modes for the Freedom Par Q9
- Wireless DMX (D-Fi): Integrated transceiver at 2.412–2.484 GHz with up to 600 ft (183 m) unobstructed range.
- RF Remote Control: Built-in RF receiver supports RFC and RFC-XL handhelds for instant looks.
- DMX Personalities: Choose 4, 6, or 14 channels to match programming depth.
- Standalone via OLED: Full-text OLED for addressing, 3/5/8/12-hour run-time selection, dimming curves, and 0–22 Hz strobe.
- Power & Recharge: External supply 24 VDC, 1.5 A (50/60 Hz); typical draw 31 W, 0.3 A @ 120 V / 30 W, 0.2 A @ 230 V; ~3-hour recharge.
LED Color Engine & Secondary Optics of the Freedom Par Q9
RGBA output with refined blending: The Freedom Par Q9 drives a 9 × 6 W RGBA engine (50,000 hr) through new secondary optics to achieve smooth, nearly artifact-free color for décor and camera work. The magnetic diffuser snaps on/off to shift coverage instantly.
- Photometrics: 1,161 lm total output; 3,580 lux @ 2 m (native), 529 lux @ 2 m (with diffuser)
- Beam / Field: Native 12° / 35°; with diffuser 37° / 68°
- Effects: 0–22 Hz strobe; built-in dimming curves for professional fades
All optical and output values are taken directly from Chauvet DJ’s Q9 specifications—no estimates.
Wireless Control Architecture — D-Fi, RF & DMX Profiles
Multiple wireless paths, built in: A D-Fi transceiver handles wireless DMX at 2.412–2.484 GHz with up to 600 ft (183 m) unobstructed range. The fixture’s RF receiver supports RFC and RFC-XL handhelds; optional FlareCON adds app-centric control.
- DMX personalities: 4, 6, or 14 channels to balance console footprint vs. control granularity
- Standalone control: Full-text OLED menus for addressing, effect access, and run-time selection
- Show hygiene: Maintain line-of-sight where possible and keep the 2.4 GHz space clean for reliable cues
Frequencies, range, and mode counts mirror the manufacturer’s published data.
Power System, Run-Time Profiles & Recharge
Event-length power without cables: Choose 3 / 5 / 8 / 12-hour profiles to match timelines; typical recharge is about 3 hours. Onboard charge/discharge protection is designed to extend service life across cycles.
- Input / PSU: 24 VDC, 1.5 A via external power supply (50/60 Hz)
- Power & current: 31 W, 0.3 A @ 120 V; 30 W, 0.2 A @ 230 V
- Operational convenience: Battery maintenance aligned to your reload windows keeps rigs consistent room-to-room
Run-time options, recharge time, and power figures are manufacturer-verified for Freedom Par Q9.
Onboard UI, Aiming & Spill Control
Setup speed with consistent looks: The full-text OLED interface accelerates addressing and profile selection. A spring-loaded kickstand sets projection angle quickly, while the built-in glare shield reduces spill and eye fatigue.
- Form factor: 4.7 × 4.7 × 4.9 in; 4.6 lb—compact enough to fit inside TRUSST® sticks
- Mounting: M12 bracket mounting hole for hardware-based installs
- Approvals: CE, UKCA, RoHS, FCC
All mechanical and UI details reflect Chauvet DJ’s official specifications.
How to Deploy the Freedom Par Q9 in the Field
- Charge & profile: Top off units (~3 hr) and select 3/5/8/12-hour profiles in the OLED to match the event schedule.
- Wireless plan: Keep D-Fi paths as unobstructed as possible to approach the stated 600 ft range; position RFC/RFC-XL for quick color calls.
- Optics choice: Use native 12°/35° for punchy columns; attach the magnetic diffuser for wide, soft coverage (37°/68°).
- Aiming consistency: Set heights with the kickstand along perimeter lines and leverage the glare shield to control spill near seating and cameras.
- Power logistics: Budget 31 W @ 120 V (30 W @ 230 V) if using the external PSU during rehearsals or extended programming.
- Strike & reset: Power down, remove diffusers if used, and return units to charge so the rig is reset for the next load-in.
These deployment steps align with published Q9 capabilities to deliver repeatable, camera-clean uplighting across venues.
Useful Links
Why Choose the Freedom Par Q9 from AVMaxx
Spec-true guidance, field-ready results: We translate verified manufacturer data into plug-and-play workflows—runtime planning, D-Fi/RF control paths, and diffuser vs. native optics—so crews deploy faster with consistent, camera-clean color.
- DJ-centric runtimes: Map 3/5/8/12-hour profiles to your schedule and recharge windows (~3 hr) for zero-stress changeovers.
- Wireless that works: Practical tips for D-Fi addressing (2.412–2.484 GHz), RFC/RFC-XL handhelds, and when to add FlareCON.
- Optics made simple: When to run 12°/35° native for punch vs. snap on the magnetic diffuser to get 37°/68° soft coverage.
- Compact installs: Q9’s 4.7 × 4.7 × 4.9 in body fits inside TRUSST®; the kickstand and glare shield keep looks uniform and comfortable.
- Programming clarity: Choose 4/6/14-ch modes to balance console footprint and effect depth—no guesswork.
Bottom line: AVMaxx pairs precise specs with hands-on deployment advice so your Freedom Par Q9 rigs look premium and stay on schedule.
Frequently Asked Questions
Is the Freedom Par Q9 truly wireless and what control options does it support?
Yes. It’s a 100% TRUE wireless battery uplight with a built-in D-Fi transceiver for wireless DMX and a built-in RF receiver for RFC/RFC-XL handhelds. FlareCON is optional for app-centric control.
How long will it run on a charge?
Select 3, 5, 8, or 12-hour run-time profiles from the OLED menu. Actual endurance varies by colors/intensity, but these profiles align with common event lengths.
What are the optics and output specs?
9 × 6 W RGBA engine with secondary optics. Native 12° beam / 35° field at about 3,580 lux @ 2 m; with the magnetic diffuser it’s 37° / 68° at roughly 529 lux @ 2 m. Total output ~1,161 lm. Strobe 0–22 Hz.
What DMX personalities are available?
4, 6, or 14 channels—from streamlined color control to deeper programming for effects and fades.
Does the RFC remote need line of sight?
No. The RFC works without line of sight thanks to the fixture’s built-in RF receiver. For extended handheld control, use RFC-XL.
How long does it take to recharge and what power does it use?
About 3 hours to full on the external supply. Input is 24 VDC, 1.5 A (50/60 Hz). Typical draw is 31 W, 0.3 A @ 120 V or 30 W, 0.2 A @ 230 V.
Can I mount it in truss and keep spill off guests and cameras?
Yes. The compact body (4.7 × 4.7 × 4.9 in; 4.6 lb) fits inside TRUSST®, and the glare shield plus kickstand help control spill and projection angles.
Is the Freedom Par Q9 outdoor-rated?
The Q9’s specs do not list an IP rating. Use indoors or in protected environments. For weather-resistant use, consider IP-rated Freedom models.
What’s included in the box?
Freedom Par Q9 fixture, external power supply, magnetic diffuser, and a Quick Reference Guide.
Choose the Freedom Par Q9 from AVMaxx when you need compact, TRUE-wireless RGBA color with reliable D-Fi/RF control, diffuser-softened coverage, and a deployment plan built for DJs.
