Chauvet DJ Freedom Par H9 IP X4: TRUE-Wireless RGBAW+UV Uplight 4-Pack with RFC Remote & Multi-Charger
Four fixtures, one ready-to-roll kit: Freedom Par H9 IP X4 bundles four 100% TRUE wireless hex-color uplights with a protective carry bag, an RFC handheld (no line-of-sight required), and a space-saving multi-charger to top off multiple units at once. Each fixture includes a built-in D-Fi transceiver for wireless DMX and a built-in RF receiver for instant handheld control.
Clean color, compact footprint: Per-fixture you get a 9 × 10 W RGBAW+UV engine (50,000 hr) behind new secondary optics for near-artifact-free blending, plus a magnetic diffuser for softer, wider coverage. Native optics are 23°/46° with up to 1,249 lux @ 2 m (about 1,258 lm), and with the diffuser you’ll see roughly 40°/79° at 432 lux @ 2 m. A glare shield reduces spill; the spring-loaded kickstand dials in the projection angle.
Event-length runtime & outdoor versatility: Select 3/5/8/12-hour profiles from the full-text OLED and recharge in about 3 hours. The IP54 housing is suited for temporary outdoor use, and D-Fi operates at 2.412–2.484 GHz with up to 600 ft (183 m) unobstructed range. Kit footprint is travel-friendly at approximately 13.7 × 15.8 × 7.2 in and 26.7 lb.
- Real-World Applications & Lighting Roles:
- Wedding & corporate perimeter uplighting (indoor / temporary outdoor)
- Patio, tent, and ceremony ambience where power runs are impractical
- Ballroom wall washes and truss warming (fits inside TRUSST®)
- Fast turn rentals needing cable-free, camera-clean color
Where the Freedom Par H9 IP X4 Kit Excels
- TRUE Wireless Workflow: Four battery uplights with D-Fi DMX and RF handheld control for cable-free rooms.
- Rapid Turnarounds: Included multi-charger saves space and recharges multiple fixtures simultaneously (~3-hour cycles).
- Decor & Camera-Ready Color: New secondary optics plus a magnetic diffuser deliver smooth blends for walls and drape.
- Outdoor-Capable: IP54 housing supports temporary outdoor events with published startup/operating ranges.
- Small-Rig Efficiency: Compact fixtures, glare shield, and kickstand speed consistent placement across a ballroom line.
- Travel-Friendly Logistics: Protective carry bag keeps the set organized between shows (kit ~13.7 × 15.8 × 7.2 in, 26.7 lb).
Control Modes for the Freedom Par H9 IP X4
- Wireless DMX (D-Fi): Built-in transceivers on 2.412–2.484 GHz with up to 600 ft (183 m) unobstructed range.
- RF Remote Control: RFC handheld included (no line-of-sight needed); RFC-XL optional for extended handheld control.
- App/Bridge Option: FlareCON compatible for mobile/app-centric workflows.
- DMX Personalities: Select 6, 8, or 16 channels per fixture to match programming depth.
- Standalone via OLED: Per-fixture full-text OLED for addressing, dimming curves, strobe (1–25 Hz), and 3/5/8/12-hour runtime profiles.
- Power & Recharge: Use the included multi-charger to charge multiple fixtures simultaneously; typical per-fixture recharge is ~3 hours.
LED Color Engine & Secondary Optics of the Freedom Par H9 IP X4
Per-fixture color clarity, multiplied by four: Each Freedom Par H9 IP in the X4 kit uses a 9 × 10 W RGBAW+UV hex engine (50,000 hr) paired with new secondary optics for smooth, near-artifact-free blends. Native optics deliver a 23° beam / 46° field, while the magnetic diffuser widens coverage to 40° / 79° for soft perimeter washes.
- Photometrics (per fixture): ~1,258 lm; 1,249 lux @ 2 m (native), 432 lux @ 2 m (with diffuser)
- Effects: 1–25 Hz strobe; built-in dimming curves for camera-clean fades
- Spill control & aiming: Integrated glare shield and spring-loaded kickstand for consistent projection lines
All optical and output values are manufacturer-verified for the Freedom Par H9 IP; specs are per fixture within the X4 kit.
Wireless Control Architecture — D-Fi, RF & Group Addressing
TRUE wireless control built in: Every fixture includes a D-Fi transceiver operating at 2.412–2.484 GHz with up to 600 ft (183 m) unobstructed range, plus a built-in RF receiver for handheld control.
- Included handheld: RFC remote (no line of sight required); RFC-XL optional
- App/bridge option: FlareCON compatible for mobile/app-centric workflows
- DMX personalities (per fixture): 6, 8, or 16 channels for scalable programming
- Smart grouping: Address two fixtures as a master pair for room symmetry, mirror the other two to speed programming, then fine-tune with dimming curves
Frequencies, range, and DMX modes reflect Chauvet DJ data; group addressing tips streamline multi-fixture programming in the X4 kit.
Power & Runtime Strategy — Multi-Charger Turnarounds, Profiles & Protection
Charge fewer times, cover more events: The X4 kit includes a multi-charger to recharge multiple fixtures simultaneously while saving table space. Per fixture, select 3 / 5 / 8 / 12-hour runtime profiles from the full-text OLED to match show length; typical recharge is ~3 hours.
- Battery health: Onboard charge/discharge protection helps preserve cycle life
- Rotation plan: Stagger profiles (e.g., two at 8 hr, two at 5 hr) to maintain a consistent look across long receptions
- Line power: Use the included power cord for the multi-charger during turnarounds; individual fixtures support external PSU charging when used solo
Runtime profiles and recharge timings are manufacturer-provided; multi-charger usage reduces turnaround time for four-pack deployments.
Kit Form Factor, Transport & Protection
Built for mobile crews: A protective carry bag with organized compartments keeps fixtures and accessories secure between shows, while the compact kit footprint speeds load-ins.
- Kit size & weight: ~13.7 × 15.8 × 7.2 in; ~26.7 lb
- Included accessories: RFC remote, multi-charger, power cord, 4 magnetic diffusers
- Approvals: CE, UKCA, RoHS, FCC
- Room coverage: Four compact fixtures provide balanced perimeter coverage for small/medium ballrooms and lounges
Dimensions, weight, and inclusions are manufacturer-verified for the Freedom Par H9 IP X4 kit.
How to Deploy the Freedom Par H9 IP X4 in the Field
- Pre-show charging: Top off all four units on the multi-charger (~3 hr). Pack the RFC remote and verify spare batteries/tools aren’t needed.
- Runtime planning: Set 3/5/8/12-hour profiles in the OLED menus to match the timeline (e.g., cocktail ? reception). Use identical profiles for symmetrical pairs.
- Wireless layout: Maintain line-of-sight paths to approach the 600 ft D-Fi range. Stage the RFC near FOH for quick color calls; add RFC-XL or FlareCON if needed.
- Optics & coverage: Run native 23°/46° for tight columns; snap on the magnetic diffuser (40°/79°) for soft, even walls and drape.
- Aiming & comfort: Use the kickstand to align heights along the perimeter; deploy the glare shield to reduce spill toward seating and cameras.
- Outdoor readiness: The fixtures are IP54 for temporary outdoor use—observe published startup/operating temperature ranges.
- Strike & pack-down: Power down, remove diffusers, and return units and the RFC to the carry bag. Place the multi-charger and power cord on top for the next load-in.
These deployment steps align with the H9 IP platform’s capabilities so crews get repeatable, camera-clean results from the X4 kit night after night.
Useful Links
Why Choose the Freedom Par H9 IP X4 from AVMaxx
Deployment playbooks, not guesswork: We convert manufacturer-verified specs into step-by-step field workflows—group addressing for symmetrical looks, runtime planning with 3/5/8/12-hour profiles, and diffuser vs. native optics for camera-clean walls.
- Wireless made reliable: Practical D-Fi layout tips (2.412–2.484 GHz, up to 600 ft LOS), plus RF handheld mapping (RFC included; RFC-XL optional) so color calls are instant from FOH.
- Turnaround logistics dialed in: Multi-charger cycles (~3 hr), pack/label routines for the carry bag, and a rotation plan to keep all four fixtures consistent through long receptions.
- Optics for décor and comfort: When to snap on the magnetic diffuser (40°/79°) vs. run native (23°/46°), how to set the kickstand, and using the glare shield to minimize spill and guest eye fatigue.
- Outdoor confidence: IP54 temporary outdoor best practices with published startup/operating temperature ranges built into our guidance.
- Package optimization: Advice on add-ons (RFC-XL, FlareCON) and small-room spacing so four fixtures cover aisles, bars, and feature walls efficiently.
Bottom line: AVMaxx pairs precise specs with hands-on know-how so your Freedom Par H9 IP X4 kit hits the room fast, looks premium, and stays on schedule.
Frequently Asked Questions
Are the fixtures in the X4 kit the same as a standard Freedom Par H9 IP?
Yes. Each unit is a full Freedom Par H9 IP with 9×10 W RGBAW+UV, D-Fi wireless DMX, and a built-in RF receiver—you’re just getting four of them plus kit accessories.
What control options do I have right out of the bag?
The kit includes an RFC handheld (no line-of-sight required). Each fixture also has D-Fi for wireless DMX control and supports RFC-XL and optional FlareCON workflows.
How far will D-Fi reach and what DMX modes are available?
Up to 600 ft (183 m) unobstructed at 2.412–2.484 GHz. Choose 6, 8, or 16-channel personalities per fixture to match programming depth.
What are the runtime and recharge expectations for events?
Select 3/5/8/12-hour profiles from the OLED menu. Typical recharge is about 3 hours on the included multi-charger, which can charge multiple fixtures at once.
Is the X4 kit suitable for outdoor gigs?
Yes—each fixture is IP54 for temporary outdoor use. Follow the published startup/operating temperature ranges and maintain line-of-sight for D-Fi reliability.
When should I use the magnetic diffuser?
Snap on the diffuser for wide, soft coverage (˜40°/79°) over walls and drape. Run native 23°/46° optics for tighter columns or when you want more punch per fixture.
Does the RFC remote need line of sight?
No. The included RFC works without line-of-sight thanks to the fixtures’ built-in RF receiver. For more granular handheld control, consider the RFC-XL.
What exactly comes in the Freedom Par H9 IP X4 kit?
(4) Freedom Par H9 IP, (4) magnetic diffusers, (1) carry bag, (1) RFC remote, (1) multi-charger, power cord, and a Quick Reference Guide.
How big is the kit and how much does it weigh?
Approx. 13.7 × 15.8 × 7.2 in and 26.7 lb—compact enough for single-person load-ins and easy transport.
Choose the Freedom Par H9 IP X4 from AVMaxx when you need a road-ready, IP54-capable, TRUE-wireless 4-pack with fast charging, dependable control, and proven deployment recipes.
