Chauvet DJ EZPin Pack 4: Battery Pin Spot Kit with Magnetic Mounts, Gels & IRC Control
EZPin Pack 4 bundles four battery-powered EZpin fixtures with an IRC-6 remote in a compact VIP gear bag—purpose-built for lighting centerpieces, cakes, and focal points. Each pin spot uses a cool white 2 W LED (725 mA, 50,000 hr) at 7100 K, and ships with variable white gels (2700 K and 4000 K) for versatile looks. The optical system delivers a tight 3° beam and 6° field with 3,112 lux @ 2 m.
Deployment is fast: the magnetic base affixes to most metal surfaces—no clamps required. No metal? Use the included Scissor Clip with eye loop to attach to drop ceiling supports or air wall frames for clean cable paths. Runtime is rated up to 10 hours per fixture with a ~7 hour recharge. High-frequency PWM 97.3 kHz supports camera-friendly operation. The pack includes 4 USB cables and a multi-charger (charging: 5 VDC, 2.4 A; external PSU 100–240 VAC, 50/60 Hz).
Each unit is compact (7.4 × 2.7 × 2.1 in, 0.6 lb) with an M10 bracket mounting hole and CE approval—optimized for quick, repeatable event workflows.
Where This System Excels
- Centerpieces & Cakes: Tight 3°/6° optics and 3,112 lux @ 2 m make details pop without spill.
- Fast, Tool-Free Mounting: Magnetic base to metal surfaces; Scissor Clip for drop ceilings and air walls.
- Battery Convenience: Up to 10 hr runtime with a 7 hr recharge keeps setups cable-free.
- Variable White Looks: Native 7100 K plus included 2700 K/4000 K gels for warm-to-neutral tones.
- Mobile-Ready Kit: Four fixtures, IRC-6, multi-charger, and gear bag streamline transport and strike.
- Camera-Friendly PWM: 97.3 kHz PWM frequency supports flicker-resistant results for content capture.
Control Modes
- IRC-6 Remote (included): Wireless on/off operation for all four pin spots from the handheld remote.
- Local Operation: Battery-powered fixtures for cable-free placement; color temperature can be altered via the included gels (2700 K, 4000 K).
Single-Source Optics, Photometrics & Gels
Each EZpin uses a 2 W cool-white LED (725 mA, 50,000 hr) at a native 7100 K. Tight optics deliver a 3° beam with a 6° field, producing 3,112 lux @ 2 m. High-frequency PWM 97.3 kHz supports camera-friendly operation. The kit includes variable white gels to shift CCT to 2700 K or 4000 K for warm or neutral looks.
- LED engine: 1 × 2 W, 725 mA, 50,000 hr
- Native CCT: 7100 K • Gels: 2700 K & 4000 K
- Optics: 3° beam • 6° field
- Output: 3,112 lux @ 2 m • PWM: 97.3 kHz
Mounting & Rigging Mechanics
Tool-free installs with a magnetic base that grabs most metal surfaces—no clamps required. When metal isn’t available, use the included Scissor Clip with eye loop to attach to drop-ceiling supports or air-wall frames. An M10 bracket mounting hole is available for conventional hardware as needed.
- Primary mount: Magnetic base (most metal surfaces)
- Alternate mount: Scissor Clip w/ eye loop for drop ceilings & air-walls
- Bracket point: M10 mounting hole
- Physicals (per fixture): 7.4 × 2.7 × 2.1 in • 0.6 lb • CE approval
Battery & Charging Architecture
Each pin spot runs up to 10 hours per charge with a typical ~7 hour recharge. Charging is via 5 VDC, 2.4 A through the included multi-charger and USB cables; the external power supply accepts 100–240 VAC, 50/60 Hz.
- Runtime: up to 10 hr • Recharge: ~7 hr
- Charge input: 5 VDC, 2.4 A (USB multi-charger)
- External PSU: 100–240 VAC, 50/60 Hz
Kit Composition & Workflow
The pack is built for mobile workflows: 4 EZpins, 4 USB cables, 1 multi-charger, 1 IRC-6 remote (wireless on/off), 2 variable white gels, and a carrying bag that keeps everything organized for rapid load-ins and strikes.
- Included: 4 fixtures • IRC-6 remote • 2 gels • 4 USB cables • multi-charger • carrying bag
- Control: IRC-6 provides wireless on/off for quick cues
How to Deploy in the Field
- Charge & Check: Top up all four units on the multi-charger (5 VDC, 2.4 A). Plan for ~7 hr to full and up to 10 hr runtime.
- Mount Fast: Use the magnetic base on metal. For non-metal, clip to drop ceilings or air-walls with the Scissor Clip. Use M10 if you need bracketed mounting.
- Set Color Temperature: Run native 7100 K for crisp highlights, or apply the included 2700 K/4000 K gels for warm/neutral tones.
- Aim the Beam: Position the 3°/6° optics to hit centerpieces, cakes, or signage. Use the high output (3,112 lux @ 2 m) to keep spill minimal.
- Cueing: Use the IRC-6 for wireless on/off during entrances, reveals, or speeches.
- Camera-Friendly: Rely on the 97.3 kHz PWM for flicker-resistant results in photos and video.
- Strike & Pack: Power down with IRC-6, pull magnets/clips, coil USB leads, and return all items to the carrying bag for transport.
Useful Links
Why Choose Your EZPin Pack 4 from AVMaxx
- Manufacturer-Verified Only: We spec strictly from the data you supplied—current Chauvet DJ details, no guesses or legacy figures.
- Mounting Made Simple: We’ll map the fastest rig for your venue using the magnetic base, the included Scissor Clip for drop ceilings/air walls, or the M10 bracket point.
- Look Design with Gels: We translate native 7100 K plus 2700 K/4000 K gels into consistent centerpiece and cake tones.
- Photometrics You Can Plan On: Tight 3°/6° optics and 3,112 lux @ 2 m help you set distance and angle without spill.
- Battery & Charge Workflow: Clear rotations for up to 10 hr runtime and ~7 hr recharge using the included multi-charger and USB cables.
- Camera-Conscious Setups: We account for the high 97.3 kHz PWM when planning for photo/video moments.
- Kit-First Packaging: Four fixtures, IRC-6 on/off control, gels, charger, and bag—everything optimized for mobile entertainers.
Every recommendation is grounded in the EZPin Pack 4 specs you provided—accurate, current, and deployment-focused.
Frequently Asked Questions
What’s included in the EZPin Pack 4?
4 EZpins, 4 USB cables, 1 multi-charger, 1 IRC-6 remote, 2 variable white gels (2700 K & 4000 K), and 1 carrying bag.
How long do the fixtures run and how long to recharge?
Up to 10 hours runtime per fixture, with a typical ~7 hour recharge on the included multi-charger (5 VDC, 2.4 A).
How do I mount the pins without clamps?
Use the magnetic base on most metal surfaces. No metal? Attach with the included Scissor Clip with eye loop to drop ceiling supports or air wall frames. An M10 bracket hole is also provided.
What are the optics and output?
Beam/Field: 3° / 6° • Illuminance: 3,112 lux @ 2 m • LED: 1 × 2 W (725 mA), 50,000 hr life.
Can I change the color temperature?
Yes. Native 7100 K converts using the included gels to 2700 K or 4000 K for warm/neutral looks.
Is it suitable for photo/video?
The fixtures use a high 97.3 kHz PWM, which supports flicker-resistant results in camera environments.
How are the lights controlled?
Wireless on/off via the included IRC-6 remote, plus local operation on each battery-powered fixture.
What are the size and weight per fixture?
7.4 × 2.7 × 2.1 in (189 × 70 × 53 mm) • 0.6 lb (0.3 kg) • Approval: CE.
Tell us your table count, ceiling type, and install time—we’ll return a clean, Chauvet-verified EZPin Pack 4 plan for flawless centerpiece and cake highlights.
