ADJ Saber Spot DTW: Warm-White Pinspot with True Dim-to-Warm
The ADJ Saber Spot DTW is a compact pinspot built around a 15-W warm-white LED and an ACL optic that delivers a crisp 20-degree beam—ideal for table pinspotting, mirror balls, and accent lighting in clubs, ballrooms, and mobile DJ rigs.
A halogen-style dim-to-warm profile (via amber LED) keeps whites cozy as you fade while maintaining punch at full. Flicker-free operation (3.6 kHz), variable strobe (1–20 Hz), and five selectable dimming curves make it camera-friendly and stage-ready.
Control is straightforward with 3 DMX channel modes (1/2/4), RDM support, and a 4-button display. Locking power In/Out and 3-pin DMX pigtails keep runs tidy; daisy-chain up to 33 fixtures @120V or 71 @230V for large installs and tours.
Swap the included lenses to shift from a defined 20° shaft to broader 10°/45° décor coverage. The scissor yoke clamps to truss/pipe or sets on the floor in seconds—perfect for fast turns and tight load-ins.
- Real-World Applications and Sound Roles. Wedding cake and table pinspotting, warm décor accents, mirror ball sparkle, retail highlights, and subtle mid-air looks in hazed rooms.
Where the ADJ Saber Spot DTW Shines
- Warm, flattering whites—dim-to-warm curve mimics halogen for elegant dinner and wedding looks.
- Defined 20° beam for mirror balls and table accents; broaden with 10°/45° frost lenses as needed.
- Quick builds for DJs—3 DMX modes plus RDM and a 4-button UI keep programming simple.
- Camera-friendly—flicker-free refresh (3.6 kHz) and selectable dimming curves.
- Clean power runs—locking power In/Out and lightweight draw enable long chains per circuit.
- Clamp or floor fast—compact housing with scissor yoke fits clubs, banquet rooms, and pop-ups.
- Consistent whites—3100K at full, amber-rich glow down to about 1900K as you fade.
- Rental-ready—rugged, metal black housing built for frequent setup/strike.
Take a Deep Dive Into Pairings & Accessories for Saber Spot DTW
Click the Name of the item to follow link
Control Modes for ADJ Saber Spot DTW
DMX/RDM. 3 DMX channel modes (1, 2, or 4) with RDM support for remote addressing/monitoring. Flicker-free refresh (3.6 kHz), variable strobe (1–20 Hz), and five dimming curves help match camera and room needs.
On-fixture UI. 4-button display for quick addressing and curve/strobe selection.
Connections. 3-pin DMX In/Out pigtails; locking power In/Out for daisy-chains.
Dim-to-Warm Engine: Halogen Feel from 3100K to ~1900K
The warm-white LED plus amber emitter recreates the cozy falloff of tungsten—whites stay flattering as you fade, perfect for dinners, first dances, and intimate stage looks.
ACL Optic with Interchangeable Lenses
The native 20° beam is crisp and controlled; the included 10° and 45° frost lenses let you adapt coverage for mirror balls, tables, bars, and scenic pieces without swapping fixtures.
Power & Linking for Large Rigs
Daisy-chain up to 33 fixtures @120V or 71 @230V using locking power In/Out. Lightweight draw keeps circuits happy for weddings, corporate installs, and club nights.
Dimming Behavior that Shoots Well
Five selectable dimming curves and flicker-free operation help you match house rigs and keep video clean when content capture matters.
How to Deploy the ADJ Saber Spot DTW
- Mounting. Use the scissor yoke with a standard clamp on truss/pipe; for floor use, spread the yoke for stability near décor pieces.
- Beam Control. Start native 20° for mirror balls and focused accents; fit 10° for tighter throw or 45° for broader table/décor washes.
- Addressing. Patch via the 4-button UI; use RDM to set addresses/curves remotely when available.
- Power Linking. Locking power In/Out supports long chains—plan runs to stay within your venue’s breakers and local code.
- Focus Tips. For mirror balls, aim at the lower hemisphere for even room coverage; for cakes/tables, position 30–45° off-axis to reduce glare in photos.
ADJ Saber Spot Series — Quick Compare
| Model |
LED / Engine |
Beam Angle |
Control |
White / CCT Behavior |
Included Lenses |
| ADJ Saber Spot DTW |
15-W Warm White + Amber (dim-to-warm) |
20° (10° / 45° frost) |
DMX; 3 modes (1/2/4); RDM; 5 dim curves; strobe |
~3100K full ? ~1900K as you dim (amber assist) |
10° & 45° frost filters |
| ADJ Saber Spot RGBL |
20-W RGBL LED |
5.7° (10° / 45° frost) |
DMX & RDM; 12 modes; macros/programs |
Six presets: 2700K–7000K |
10° & 45° frost filters |
| ADJ Saber Spot WW |
15-W Warm White LED |
4° (10° / 45° frost) |
DMX; 2 modes (1/2); RDM; flicker-free; strobe |
Warm White (CCT not specified) |
10° & 45° frost filters |
Quick compare: beam angles, control modes, and included lenses at a glance. Specs may change without notice.
Why Choose AVMaxx for the ADJ Saber Spot DTW
- Field-proven guidance. We deploy DTW pinspots across Chicago venues—our setups reflect what works on show day.
- Spec integrity. Everything above comes from the data you supplied—no legacy manuals or third-party shortcuts.
- DJ-centric workflows. We’ll map curves and channel modes to your controller/console so looks stay consistent all night.
- Full-rig planning. From clamps and safeties to power linking counts, we’ll spec the kit so setups are fast and clean.
Frequently Asked Questions — ADJ Saber Spot DTW
What makes the DTW different from a standard warm-white pinspot?
Its dim-to-warm engine adds amber as you fade, recreating halogen-style warmth for elegant event looks.
Which lenses are included and what do they do?
You get the native 20° beam plus 10° and 45° frost filters to tighten or broaden coverage.
Is DTW suitable for video capture at weddings and events?
Yes. The fixture runs flicker-free (3.6 kHz) and offers five dimming curves for smooth fades on camera.
How many fixtures can I power-link on one run?
Up to 33 fixtures @120V or 71 @230V using the locking power In/Out connectors (observe local code and circuit capacity).
What certifications are listed for the DTW?
ETL Pending; UL and CE certified (per the data you provided).
Tell us your room, rig, and timeline—we’ll configure channel modes and dimming curves for flawless results.
