Advanced RGB + White Pixel Bar with Wireless FX Control
The ADJ Jolt Bar FX2 is a next-generation linear LED fixture that combines 448 RGB SMDs with 112 high-output 5W white SMDs, delivering immersive color washes, intense strobe bursts, and full-zone pixel mapping from a compact 1-meter form factor. The bar is divided into 48 independently controllable zones (32 RGB + 16 white), making it ideal for visual pixel FX, synchronized chase sequences, or massive wash and blinder looks across large stages.
Out of the box, the Jolt Bar FX2 includes a removable frost lens that softens the pixel definition for cleaner wall washes or stylized installations. ADJ’s proprietary Aria X2 wireless DMX is built-in, allowing for wireless signal distribution, fixture setup, and over-the-air firmware updates—no dongles required. For system expansion, a link plate is included, enabling multiple FX2 units to connect seamlessly for continuous pixel lines across truss or stage front.
With an ultra-wide 117° beam angle and selectable LED refresh rate up to 25kHz, the FX2 is equally at home in concert touring, nightclub installs, or broadcast environments. Its locking power + DMX connectors, intuitive OLED menu, and full macro library give it the flexibility to operate as a standalone strobe, DMX-controlled wash, or mapped pixel FX engine.
Real-World Applications and Sound Roles:
- Pixel-mapped linear bar for stages and visual FX rigs
- RGB wash and strobe accent for nightclubs and touring DJs
- High-CRI white strobe for concert strobe sequences
- Stacked or side-by-side FX wall with continuous zone flow
- Festival ground package or DJ booth front wash
Where This System Excels
- 48-Zone Pixel Control: 32 RGB and 16 white zones for advanced chase FX and pixel animations.
- Hybrid FX Design: Combines powerful white strobe output with rich RGB wash in a single unit.
- Aria X2 Wireless DMX: Built-in wireless control and OTA updates—no external module needed.
- Frost Lens Flexibility: Included removable frost filter gives you two visual styles from one fixture.
- Touring-Grade Build: Locking connectors, steel housing, and compact weight for production use.
- Linkable for Continuous FX: Use the included plate to create seamless light lines across stage widths.
Control Modes
The Jolt Bar FX2 offers extensive control options with full support for DMX512, Aria X2 wireless DMX, and RDM protocols. The fixture includes 17 selectable DMX channel modes ranging from simple static wash control to full pixel-mapped programming. Whether you're busking with macros or mapping each pixel through software, the FX2 scales to your rig with zero compromise.
- DMX Channel Modes: 6, 9, 13, 16, 18, 20, 32, 34, 38, 43, 45, 64, 78, 80, 112, 127, 129 channels
- Pixel Zones: 32 RGB zones + 16 white strobe zones (in extended modes)
- Dimming Modes: Standard, Stage, TV, Architectural, Theatre, Stage 2
- Dimming Curves: Linear, Square Law, Inverse Square, S-Curve
- Strobe Modes: Ramp Up, Ramp Down, Lightning, Random
- Strobe Rate: 0.35Hz (min) to 25Hz (max)
- LED Refresh Rate: Adjustable from 900Hz to 25kHz
Users configure the fixture using a 4-button OLED menu system located on the rear panel. Settings include DMX addressing, dimming behavior, macro access, refresh rate adjustment, and wireless linking. The FX2 is optimized for both standalone use and full integration into larger wireless DMX environments via its built-in
LED Configuration & Pixel Zones in the Jolt Bar FX2
The Jolt Bar FX2 features a powerful hybrid LED layout built for layered FX design. Its central zone holds 112 x 5W Cool White SMDs delivering sharp, high-CRI strobe bursts, while flanking sides contain 448 x 0.5W RGB SMDs for vibrant color washes and zone-based movement effects. Together, these LEDs are divided into 48 addressable zones: 32 RGB and 16 white.
- Beam Angle (Full On): 76.6°
- Field Angle (Full On): 92°
- White LED Color Temp: Typical 7400K (range 6900K–8000K)
- RGB Wavelengths: Red 620–630nm, Green 515–530nm, Blue 460–470nm
- CRI: 86
This wide, high-output engine enables precise visual sequencing, smooth color transitions, and bold strobe layering, whether you’re using it as a stage-front FX strip or building wall-wide matrix designs.
Wireless Control & Aria X2 Functionality
The FX2 features built-in Aria X2 Wireless Management, ADJ’s proprietary protocol designed for robust DMX transmission and fixture networking. No external node is required—each unit can send, receive, and be addressed wirelessly, streamlining programming and eliminating cable clutter.
Aria X2 supports:
- Wireless DMX transmission across large stages or multiple fixture banks
- Over-the-air firmware updates for long-term feature expansion
- Wireless fixture setup and address configuration directly via console or Aria control interface
This makes the Jolt Bar FX2 especially powerful for festival builds, flown rigs, or club installs where physical DMX lines are impractical or costly. RDM compatibility further enhances fixture discovery and remote setting adjus
Internal Macros, Programs & Dimming Modes
For fast programming and eye-catching effects, the Jolt Bar FX2 includes a built-in library of 25 RGB macros and 9 white strobe macros, ready for DMX triggering or standalone playback. These macros are optimized for movement, burst, chase, and wash looks—ideal for mobile DJs, club installs, or fast-paced touring shows.
- Dimming Modes: Standard, Stage, TV, Architectural, Theatre, Stage 2
- Dimming Curves: Linear, Square Law, Inverse Square Law, S-Curve
- Strobe Rate: Adjustable from 0.35Hz to 25Hz
- LED Refresh Rate: Selectable between 900Hz–25kHz
The OLED menu on the rear panel allows easy access to mode selection, refresh rate tuning, DMX addressing, and wireless configuration. From smooth theatrical fades to hard-edged pixel strobing, the FX2 offers total response control.
Modular Linking & Frost Filter System
To enhance visual continuity across larger rigs, each Jolt Bar FX2 includes a connecting plate that lets multiple units link edge-to-edge for seamless pixel flow. This makes it easy to build full FX walls, continuous strip visuals, or symmetrical chase patterns with no gaps or offsets.
Also included is a removable frost lens assembly that softens pixel output and blends zones for a diffused visual aesthetic. This gives designers two visual modes—crisp pixel definition or soft wash blur—using the same fixture.
- Included: Frost lens, linking plate, and mounting brackets
- Mounting: Dual 180° adjustable brackets double as floor stands
This dual-mode flexibility combined with mechanical linkability makes the FX2 one of the most adaptable linear FX bars in the ADJ arsenal—tailored for clubs, stage truss, or immersive scenic builds.
How to Deploy in the Field
The ADJ Jolt Bar FX2 is engineered for flexible, modular deployment across stages, truss spans, DJ booths, or visual FX walls. Each unit ships with dual 180° adjustable mounting brackets that double as floor stands, enabling vertical or horizontal placement depending on your application. The fixture's compact 1-meter width makes it ideal for evenly spaced grid layouts or side-by-side linking with the included plate for seamless pixel continuity.
- Truss Rigging: Use omega-compatible brackets with clamps to hang from overhead or side truss lines. Ideal for wash/strobe FX facing out or downstage.
- Floor Standing: Brackets function as kickstands for uplighting, stage-edge FX, or backdrop color washes.
- Wall Linking: Use the included connection plate to join multiple FX2 units edge-to-edge for continuous zone programming across wide installs or scenic elements.
- Wiring Strategy: Locking 5-pin DMX and locking AC in/out are positioned for end-to-end chaining along truss or backline rails. Up to 6 units may be linked @120V (12 @230V).
- Visual Modularity: Install the frost lens for blended wall washes or remove it for sharp pixel FX targeting.
Its low profile, lightweight design and integrated wireless DMX make the FX2 ideal for fast load-ins, overhead installs, or mobile rigs requiring minimal cabling.
Why Choose the Jolt Bar FX2 from AVMaxx
At AVMaxx, we work with lighting fixtures in real-world conditions—not just spec sheets. The ADJ Jolt Bar FX2 stands out as one of the most versatile linear LED bars we’ve tested, offering a unique blend of white strobe power, RGB wash control, pixel zone mapping, and wireless DMX in a single bar.
We’ve deployed the FX2 in clubs, flown truss arrays, and festival ground packages. Whether you're building an immersive backdrop or front-facing pixel chase wall, this fixture adapts to your rig without added complexity. We stock the necessary accessories—filters, clamps, and cables—so you're never stuck mid-install. When you order from AVMaxx, you’re getting more than gear—you’re getting a rigging-ready, show-tested solution that performs on every cue.
Frequently Asked Questions
Q: Can I link multiple Jolt Bar FX2 units for continuous effects?
A: Yes. Each unit comes with a link plate that allows multiple bars to be connected seamlessly, enabling pixel chases across an uninterrupted visual line.
Q: Is the frost lens required, or can I remove it?
A: The frost lens is removable. Use it to soften pixel output for smoother wash effects, or remove it for crisp, high-definition pixel mapping and sharp strobe FX.
Q: Does the FX2 support wireless DMX out of the box?
A: Yes. The fixture includes built-in Aria X2 wireless DMX, so you can configure, control, and update fixtures wirelessly without an external transmitter.
Q: What’s the minimum number of channels I need to control it?
A: The FX2 operates in 17 different DMX modes, with as few as 6 channels for basic control and up to 129 channels for full pixel mapping and FX access.
Q: Is the Jolt Bar FX2 good for mobile DJs?
A: Absolutely. It’s lightweight, linkable, wireless-ready, and includes built-in macros—making it perfect for fast setups and dynamic stage presence.
Looking to build a pixel-mapped wall or strobe line with minimal setup time? The Jolt Bar FX2 is built for flexibility, speed, and full-spectrum FX control—rig it right with AVMaxx.
