Product Overview of the ADJ Focus Spot 4Z Pearl
The ADJ Focus Spot 4Z Pearl delivers professional-grade moving-head spot performance in a sleek pearl-white finish, powered by a 200W cool-white LED engine rated for 50,000 hours. At just 23 lbs, it’s designed for mobile DJs, touring LDs, clubs, and houses of worship seeking high-output, lightweight fixtures.
Featuring motorized focus and an 11°–22° zoom (with 16-bit fine zoom), the 4Z Pearl produces both tight beam framing and broad wash coverage. A single GOBO wheel houses six replaceable aluminum gobos plus open, while one color wheel offers eight dichroic filters plus white for rapid color shifts. Two indexable prisms (5-facet linear, 6-facet circular) expand creative options, and smooth 0–100% dimming, variable strobe speeds, and dual cooling fans ensure consistent, reliable operation under heavy use.
PowerLock In/Out connectors enable daisy-chain power (4 units @120 V, 10 units @240 V), while 3-pin XLR DMX In/Out (16/18/22 channels) with RDM support, a color LCD menu, and USB firmware updates provide flexible control. Fits two per ADJ DRC MH road case for seamless transport and rapid deployment.
Real-World Applications and Sound Roles:
- Club spot and wash for live DJs and bands
- Touring rigs requiring compact, high-output fixtures
- Houses of worship with dynamic gobo and color effects
- Theatrical and corporate events demanding precise beam control
- Rental inventories prioritizing durable, daisy-chain power setups
Where This System Excels
- Precision Beam Shaping: Motorized focus and 11°–22° zoom with 16-bit fine adjustment deliver razor-sharp gobos and smooth wash transitions.
- Rapid FX Changes: Six replaceable gobos and eight dichroic filters plus white allow instant pattern and color swaps on the fly.
- Kaleidoscopic Prism Effects: Two indexable prisms create layered, multi-beam visuals for dynamic stage and club looks.
- Reliable Dimming & Strobe: Smooth 0–100% dimming across six curve modes and variable strobe speeds ensure cinematic fades and rhythmic pulses.
- Tour-Ready Connectivity: PowerLock daisy-chain power and RDM-enabled DMX simplify cabling and remote setup in any venue.
Control Modes
Flexible DMX Channel Options: Three modes (16, 18, 22 channels) accommodate varying levels of control—from basic pan/tilt to full parameter access.
- DMX-512 & RDM: Standard 3-pin XLR In/Out with Remote Device Management for address configuration and status monitoring.
- Internal Programs: Built-in presets and automated shows for stand-alone operation without a console.
- Dimming Curves: Six selectable curves (Standard, Stage, TV, Architectural, Theatre, Stage 2) for customized fade responses.
- Fine Pan/Tilt & Zoom: 16-bit resolution ensures ultra-smooth movement and precise 11°–22° zoom adjustments.
- USB Firmware Update: Front-panel port for on-site software upgrades and feature enhancements.
Optical and Effects Engine of the Focus Spot 4Z Pearl
Motorized Focus & Zoom: Precision 11°–22° motorized zoom with 16-bit fine focus control delivers razor-sharp beams and wide, even washes with repeatable accuracy.
Dichroic Color Wheel: Single wheel with eight vibrant dichroic filters plus white (including CTO, CTB, UV) enables smooth, gel-free color transitions.
GOBO & Prism Effects: Six-position GOBO wheel (removable/rotatable aluminum gobos + open) and two indexable prisms (5-facet linear, 6-facet circular) create intricate patterns and kaleidoscopic beam splits.
Frost & Dimming Engine: Light and heavy frost filters for soft-edge wash looks; smooth 0–100% dimming across six selectable curves and versatile strobe effects ensure cinematic fades and rhythmic pulses.
Control Fidelity: 16-bit pan/tilt and zoom resolution, RDM-enabled DMX512, and USB firmware update port deliver precise, future-proof performance.
How to Deploy in the Field
- Truss Mounting: Attach the fixture using the included omega bracket and M12 clamp, then secure a safety cable rated for 10× the unit’s weight.
- Floor Placement: Position on stage decks or ground rows for beam sweeps and wash effects, using the flat base and adjustable tilt.
- Daisy-Chain Power: Use PowerLock In/Out connectors to link power (up to 4 units at 120 V or 10 units at 240 V) for streamlined cabling.
- DMX Cabling: Daisy-chain DMX via 3-pin XLR In/Out; terminate the last fixture with a 120 O resistor to prevent signal errors.
- Road Case Transport: Pack two units into the ADJ DRC MH road case for secure, stackable shipping and storage.
- Quick Setup: Pre-set DMX channel mode and address via the LCD menu, then connect power and DMX to begin operation immediately.
ADJ Focus Spot Series Comparison Chart
| Model |
Light Source |
Zoom Range |
Gobos |
Color Wheel |
Prisms |
Frost Filters |
DMX Channels |
Weight |
Road Case |
| ADJ Focus Spot 2X |
1×100W White + 1×3W UV LED |
Fixed focus |
6 rotating/replaceable + open |
8 colors + white |
6-facet circular & linear |
None |
16 / 18 |
14.5 lbs |
– |
| ADJ Focus Spot 4Z |
200W Cool White LED |
11°–22° motorized |
6 aluminum + open |
8 colors + white |
5-facet linear & 6-facet circular |
None |
16 / 18 / 22 |
23 lbs |
DRC MH (2 per case) |
| ADJ Focus Spot 4Z Pearl |
200W Cool White LED |
11°–22° motorized |
6 aluminum + open |
8 colors + white |
5-facet linear & 6-facet circular |
None |
16 / 18 / 22 |
23 lbs |
DRC MH (2 per case) |
| ADJ Focus Spot 5Z |
200W Cool White LED |
11°–22° motorized |
6 (5 aluminum, 1 glass) + open |
2× (8 colors + white) |
5-facet linear & 6-facet circular |
Light & heavy |
19 / 22 / 26 |
23 lbs |
DRC MH (2 per case) |
| ADJ Focus Spot 6Z |
300W Cool White LED |
9°–28° motorized |
2× (7 each) + open |
2× (7 colors + white) |
6-facet linear & 6-facet circular |
Light & heavy |
22 / 25 |
43.6 lbs |
DRC MHX (2 per case) |
Why Choose the Focus Spot 4Z Pearl from AVMaxx
Expertise You Can Trust: AVMaxx lighting specialists have deployed the Focus Spot 4Z Pearl in clubs, theatres, and houses of worship—our hands-on experience ensures you get the best rigging and programming advice.
Comprehensive Support: From pre-purchase consultations on system design to post-sale firmware updates via our USB service port, AVMaxx stands by every fixture with dedicated service and troubleshooting.
Accessory & Road Case Solutions: We stock PowerLock cables, safety hardware, and the ADJ DRC MH case for efficient transport—tested together for seamless fit and maximum protection.
Every Focus Spot 4Z Pearl we sell comes pre-configured with optimal DMX modes and accessories hand-picked by AVMaxx field techs.
Partner with AVMaxx for pro-grade deployment guidance and ensure your fixtures perform flawlessly from first power-up to final take-down.
Q: What’s the difference between the Focus Spot 4Z and 4Z Pearl?
A: They share identical optics, gobos, prisms, and LEDs—only the 4Z Pearl features a pearl-white finish for aesthetic integration in light-colored venues.
Q: Can I daisy-chain power and DMX on the 4Z Pearl?
A: Yes. PowerLock In/Out supports up to 4 units at 120 V (10 units at 240 V), and 3-pin XLR DMX In/Out with a terminator prevents signal errors.
Q: Does the fixture support RDM for remote configuration?
A: Absolutely. RDM allows you to set addresses and monitor status directly from any RDM-capable console or software.
Q: Are the gobos and frost filters user-replaceable?
A: The six aluminum gobos are removable and rotatable on site; frost filters (light/heavy) can also be swapped without tools once power is disconnected.
Q: Is the Focus Spot 4Z Pearl suitable for permanent installations?
A: Yes. Its robust housing, safety-certified brackets, and versatile dimming curves make it ideal for fixed applications in churches, theatres, and event spaces.
Elevate your lighting design with the ADJ Focus Spot 4Z Pearl—order from AVMaxx today for unmatched support and performance!
