Advanced RGBAL+UV Pixel Control with IP65 Protection
The ADJ ElectraPix Par 7 is a high-output wireless LED PAR designed for production-level control and rugged outdoor use. It features seven 20W RGBAL+UV foreground LEDs with full pixel mapping plus a ring of 29 RGB background LEDs for ambient and ‘eye candy’ effects. A selectable white CCT range from 2300K to 9900K makes this fixture versatile for both warm washes and daylight-balanced key light applications.
Outfitted with an IP65-rated housing, the ElectraPix Par 7 can handle demanding outdoor conditions while delivering precise color rendering through calibrated LED engines. Whether deployed wirelessly via Aria X2, Bluetooth, or the included UCIR24 remote, or hardwired via DMX/RDM, this fixture gives designers full flexibility in control protocols. It includes a frost diffusion filter and gel frame, and supports multiple dimmer curves and user-selectable refresh rates up to 25kHz.
Perfect for uplighting, truss warming, architectural accents, or feature wash duties, the ElectraPix Par 7 offers long battery life (5–20 hours depending on output mode), fast recharging, and a lockable L Track mounting system for safe rigging.
Real-World Applications and Sound Roles:
- Outdoor truss and architectural wash (IP65 protection)
- Wireless accent lighting for stages and runways
- DJ booth uplighting with full remote control
- Event wash lighting with battery or AC operation
- Pixel-mapped zone effects for installations and clubs
Where This System Excels
- Wireless Pixel Control: Full RGBAL+UV zone control via Aria X2, Bluetooth, or remote for total creative freedom.
- Rugged IP65 Design: Weather-protected housing for consistent outdoor use across all event environments.
- Selectable White CCT: 2,300K to 9,900K tunable white output for precise mood or key lighting.
- Battery or Mains Operation: Runs up to 20 hours on internal battery—ideal for wireless wash rigs.
- Bundled Pro Accessories: Ships with frost filter, gel frame, remote, and locking power cable for full deployment out of the box.
Control Modes for the ElectraPix Par 7
The ADJ ElectraPix Par 7 supports a wide range of control protocols and channel options designed for both streamlined use and deep pixel mapping. Operators can configure the fixture via the onboard OLED digital display with 4-button navigation, or take advantage of wireless and remote control options for fast deployment in dynamic setups.
- DMX Control: 9 selectable channel modes — 5, 6, 9, 13, 22, 24, 42, 45, and 54 CH layouts for full or simplified control.
- Aria X2 Wireless: Built-in Aria X2 Wireless DMX receiver for cable-free data and system integration.
- Bluetooth Control: App-compatible for quick configuration and wireless programming from mobile devices.
- UCIR24 IR Remote: Included handheld remote allows for direct access to dimming, macros, and program selection.
- RDM + RDM Net: Full RDM compatibility for remote addressing and system status monitoring.
- Manual + Primary/Secondary: Onboard control and Master/Slave operation for synced FX across multiple units.
Additional configuration options include 6 user-selectable dimmer modes, 4 dimmer curves (Linear, Square Law, Inverse Square, S-Curve), selectable strobe from 0.3Hz to 11Hz, and adjustable LED refresh rates from 900Hz to 25kHz to match camera environments.
LED Source & Color Architecture of the ElectraPix Par 7
The ElectraPix Par 7 utilizes a hybrid LED system designed for dynamic visual versatility. It houses seven 20W Hex Color (RGBAL+UV) foreground LEDs paired with twenty-nine 0.2W RGB background LEDs. These two layers of illumination are individually controllable, enabling designers to apply bold front-facing washes or animated backdrop effects with seamless transitions.
Thanks to full pixel control and built-in foreground/background program libraries, the fixture supports creative cueing without external mapping software. The 17° beam angle and 45mm optics deliver tightly focused output, while a 20° diffusion filter (included) expands coverage for ambient applications. The variable white range from 2,300K to 9,900K adds tunable warmth or clarity based on venue mood or event type.
Lime Diode Integration in the ElectraPix Par 7
The ElectraPix Par 7 features a true HEX LED configuration that includes a dedicated Lime emitter, enhancing both brightness and color fidelity beyond traditional RGB or even RGBW setups. Lime fills in a critical part of the spectrum between green and amber, allowing designers to achieve cleaner whites, punchier pastels, and richer skin tones.
By blending RGBAL+UV output with precise color temperature tuning (2700K–9900K), the Par 7 offers exceptional versatility in broadcast, theatrical, and architectural environments where color accuracy is paramount. The inclusion of Lime also improves energy efficiency by reducing the need to overdrive red and green to achieve certain hues—making battery-powered operation more effective during long events.
This is especially useful when using the fixture in film, fashion, or stage design, where saturated colors must remain vivid under camera exposure or layered lighting.
Lime output dramatically improves punch and purity—critical for achieving balanced full-spectrum color in advanced uplighting, skin keying, and ambient zone work.
Wireless Control Ecosystem & Protocols
Control of the ElectraPix Par 7 is made fluid and wireless through its built-in Aria X2 DMX system, which supports encrypted wireless DMX transmission over long ranges with full RDM compatibility. This allows remote addressing, monitoring, and over-the-air updates, ideal for venues where cabling is limited or undesirable.
Additional control options include Bluetooth connectivity, direct IR operation using the included UCIR24 wireless remote, and wired DMX via IP-rated 5-pin XLR connectors. A 4-button OLED menu enables onboard access to 9 DMX channel modes (ranging from 5 to 54 channels), dim curves, refresh rates, and gamma settings, all accessible without needing a controller for setup.
Battery Performance & Thermal Optimization
Designed for untethered operation, the ElectraPix Par 7 includes a built-in 7,000mAh rechargeable lithium-ion battery rated for up to 20 hours of runtime depending on user selection. A special full-output mode provides 5 hours of max brightness, while 10-hour saver modes extend usability across longer events. Charge time is approximately 6 hours, with full-cycle protection and an estimated 500 charge cycles over its lifespan.
Thanks to its IP65-rated chassis and advanced thermal regulation, the fixture maintains optimal performance in ambient temperatures ranging from -4°F to 113°F (-20°C to 45°C). Smart charging logic and a secure battery housing make it ideal for mobile lighting designers or outdoor installs where reliability and quick setup matter.
How to Deploy the ElectraPix Par 7 in the Field
The ElectraPix Par 7 is engineered for rapid deployment in both indoor and outdoor environments, whether battery-powered or hardwired. Its integrated L Track system allows for quick attachment of rigging accessories like the optional LTrack CA2 adapter with clamp, ideal for truss mounting in concert settings. For floor-based uplighting, its adjustable dual-purpose kickstand stabilizes the fixture while enabling a 45° throw angle toward backdrops or stage facades.
With IP65-rated locking power and 5-pin DMX ports, this fixture can be safely used in open-air installations. Link up to 15 fixtures on a 120V line or 28 on 230V, using standard outdoor power distro systems. When deploying wirelessly, enable Aria X2 pairing and address fixtures via RDM for fast programming.
- Truss Hanging: Use LTrack CA2 or Omega bracket (not included) for vertical or angled mount positions.
- Uplighting / Ground Effects: Set on the kickstand bracket for wall wash or scenic uplighting applications.
- Battery-Only Mode: Ideal for cable-free decor events — select 5/10/20-hour runtime based on brightness needs.
- Weather-Resistant Rigs: Suitable for temporary outdoor events with full IP65 protection when used with sealed DMX cables.
The ElectraPix Par 7’s wireless DMX, fast mounting, and battery power make it a top-tier fixture for mobile, architectural, and outdoor rigs alike.
Why Choose the ElectraPix Par 7 from AVMaxx
At AVMaxx, we know that flexibility, output, and wireless control are essential for today’s lighting professionals. That’s why we stand behind the ElectraPix Par 7 as a go-to fixture for indoor-outdoor events, architectural uplighting, and mobile DJ rigs. With real-world deployment in live shows and weather-sensitive applications, our team has tested the Par 7’s IP65 sealing, Aria X2 stability, and battery runtime claims — and it delivers.
We stock all accessories in-house — from LTrack clamps to barn doors — and our lighting techs can guide you through Aria X2 pairing, DMX trait mapping, and pixel control programming. If you're building an ILS-free wireless rig or need powerful RGBAL+UV wash effects with zero cabling, the Par 7 is one of our most deployment-ready picks.
AVMaxx is your proven partner for battery-powered IP65 pars — tested, supported, and shipped with pro-grade confidence.
Frequently Asked Questions
Q: How long will the ElectraPix Par 7 run on battery power?
A: In full-output mode, it delivers up to 5 hours. When using saver settings, it can run up to 20 hours. Battery mode is user-selectable from the onboard menu.
Q: Does the ElectraPix Par 7 support wireless control protocols?
A: Yes. It supports Aria X2 Wireless DMX, Bluetooth, and IR (via the included UCIR24 remote), as well as standard DMX and RDM for fully wired use.
Q: Can I use the ElectraPix Par 7 outdoors?
A: Absolutely. The fixture is IP65 rated, making it fully weather-resistant and ideal for outdoor stages, tented events, and semi-permanent installs.
Q: Are the individual LEDs pixel-mappable?
A: Yes. All seven RGBAL+UV LEDs are individually controllable, and the unit includes background LED zones for dynamic eye candy effects.
Q: Does the fixture ship with any filters or accessories?
A: It includes a 20° diffusion filter, gel frame, UCIR24 remote, and locking power cable. Optional barn doors and LTrack adapters are also available.
Need help building a cable-free, weather-ready rig? The AVMaxx team can spec and support a full ElectraPix Par 7 layout for touring, décor, or architectural installs.
