ProX XC-USBC2TS06 6ft USB-C to Dual 1/4" TS Cable — Plug-and-Play Playback Into Pro Audio Inputs
Move modern USB-C playback into pro 1/4" TS inputs fast: the ProX XC-USBC2TS06 is a 6ft USB-C to dual 1/4" TS male audio cable built to route audio from USB-C smartphones, tablets, and computers into 1/4" TS-equipped mixers, amplifiers, PA systems, powered speakers, and sound consoles for reliable live playback.
Designed for real show workflows: live sound, DJ performances, AV production, presentations, and mobile playback where you need clean signal and quick setup. The cable is built with an integrated 16-bit / 44.1kHz digital-to-analog conversion chip to support accurate sound reproduction with minimal noise and no hum or distortion when feeding pro inputs.
Built to survive gig life: heavy-duty ProX metal connector shells, high quality contacts, and a 6mm high-density braided jacket with double-layer shielding to help minimize interference. It is specified to support 20,000+ bend cycles for repeated coiling, packing, and re-patching.
Real-World Applications and Signal Roles:
- DJ walk-in music + intros: route phone or laptop playback into 1/4" inputs on mixers, amps, or powered speakers.
- AV presentation audio: connect a USB-C laptop to 1/4" TS inputs for speech, video playback, and event cueing.
- Mobile playback patch: keep a dependable USB-C-to-1/4" solution in the kit for quick venue turns and backup routing.
Where the ProX XC-USBC2TS06 Excels
- USB-C to Dual 1/4" TS Output Routing: purpose-built for one-way playback from USB-C devices into 1/4" TS input workflows.
- Cleaner Playback Into Pro Inputs: integrated 16-bit / 44.1kHz DAC is specified for clear, accurate sound with low noise and full-frequency response.
- Noise Control by Design: double-layer shielding and braided construction are specified to minimize interference in busy booths and production areas.
- Road-Ready Build: heavy-duty metal shells and high quality contacts are intended for long-term reliability.
- Flex That Holds Up: specified 20,000+ bend cycles for repeated gig handling and coiling.
- Wide USB-C Source Compatibility: designed for USB-C phones, tablets, and computers used in modern DJ and AV workflows.
- Clarity on Direction: output-only design helps prevent setup confusion when the room is waiting.
- Chicago DJ Practicality: a fast patch for corporate rooms, ballrooms, and mobile gigs where clean playback matters.
Why Dual 1/4" TS Matters for Playback Setups
The XC-USBC2TS06 is designed to take audio from a USB-C device and feed 1/4" TS inputs on pro gear. That makes it a practical choice when your destination is built around 1/4" input paths on mixers, amplifiers, PA systems, powered speakers, or consoles and you need a direct, show-ready playback connection.
- Built for playback feeds: intros, walk-in music, backing tracks, presentation audio, and mobile content routing.
- Pro destination focus: intended for 1/4" TS input workflows on common event and production systems.
Integrated 16-bit / 44.1kHz DAC for Consistent USB-C Audio Conversion
The cable is specified with a 16-bit / 44.1kHz digital-to-analog conversion chip designed for accurate sound reproduction with minimal noise, full-frequency response, and no hum or distortion. This is especially valuable when system gain is high or the room is quiet and any noise becomes obvious.
- Playback clarity focus: built to support clean program material from phones, tablets, and laptops.
- Less troubleshooting: designed to reduce the common noise issues when integrating consumer devices into pro inputs.
Braided 6mm Jacket + Double Shielding for Real-World Interference Control
Stage and event environments are full of potential interference. The 6mm high-density braided jacket and double-layer shielding are specified to minimize interference while maintaining signal integrity through repeated routing changes, tight booth spaces, and busy cable paths.
- Shielding strategy: designed to help keep playback clean in dense production environments.
- Durability strategy: built for repeated handling and frequent re-patching.
Output-Only Directionality: What This Cable Is and Is Not
This cable is explicitly one-way: USB-C audio out to 1/4" TS inputs. It does not support recording back into the phone/tablet/computer and does not support microphone input into USB-C devices. That clarity prevents mismatches during load-in.
- Designed for: sending playback from USB-C devices to 1/4" TS inputs on pro equipment.
- Not designed for: recording, two-way transmission, or mic input into computers or smartphones.
How to Deploy ProX XC-USBC2TS06 in the Field
Use the XC-USBC2TS06 when you need dependable USB-C playback into 1/4" TS input workflows. Connect USB-C to your source device, then route the dual 1/4" TS male ends to the intended 1/4" TS inputs on your mixer, amplifier, powered speaker, PA system, or console.
- Gain stage like a pro: start with channel levels down, connect, then bring up to target to avoid surprises.
- Route intentionally: patch the dual 1/4" TS outputs to the inputs your system expects for playback routing.
- Keep the path clean: use sensible cable routing to take advantage of the specified shielding in high-interference environments.
- Coil for longevity: relaxed coils support the specified 20,000+ bend-cycle design over long gig seasons.
- Remember direction: output-only playback cable; not for recording or mic input into USB-C devices.
For fast event turns, the XC-USBC2TS06 is a clean way to move USB-C playback into 1/4" TS systems with dependable patching and minimal noise.
Why Choose the ProX XC-USBC2TS06 from AVMaxx:
Playback cabling is where many rigs lose time: fragile connectors, noisy signal paths, or the wrong directionality. The XC-USBC2TS06 is purpose-built for USB-C device playback into 1/4" TS inputs, with a specified DAC stage and a durability-focused braided, shielded build intended for live and mobile production use.
AVMaxx helps Chicago DJs, presenters, and AV teams choose playback cabling that matches real deployment: fast setup, clean routing, and clear limitations so there is no confusion at load-in.
AVMaxx pairs the ProX XC-USBC2TS06 with field-aware routing guidance so Chicago event pros can run USB-C playback into 1/4" TS systems with confidence.
Frequently Asked Questions — ProX XC-USBC2TS06
What does the XC-USBC2TS06 connect?
It is designed to route audio from USB-C-enabled smartphones, tablets, and computers into 1/4" TS input-equipped mixers, amplifiers, PA systems, powered speakers, and sound consoles.
Is this cable for recording audio back into my laptop or phone?
No. This cable is one-way audio transmission only: USB-C device audio out to 1/4" TS inputs. It does not support recording, two-way transmission, or microphone input into computers or smartphones.
What conversion spec is listed for the built-in audio chip?
The cable is specified with a 16-bit / 44.1kHz DAC chip for clean, accurate playback with low noise and full-frequency response.
Is this useful for DJs running walk-in music or backing tracks from a USB-C device?
Yes. It is designed for DJ performances and live playback where a USB-C phone, tablet, or laptop needs to feed 1/4" TS inputs on a mixer, amp, PA system, or powered speakers quickly.
What durability features are specified for stage use?
It is described with heavy-duty metal connector shells, high quality contacts, a 6mm high-density braided jacket, double-layer shielding, and support for 20,000+ bend cycles.
If you share your destination input type and playback source device, AVMaxx can help you plan the cleanest patch for your workflow.
When the room is waiting and your playback has to hit on cue, the right USB-C-to-1/4" TS cable keeps your start clean and your setup stress-free.
