ProX X-SP3SC-WX2 2-Pack White 3-Side Stand Scrims

ProX X-SP3SC-WX2 White 3-Side Stand Scrims — Clean Coverage for 5–6 Ft Speaker & Lighting Stands (2-Pack)

The ProX X-SP3SC-WX2 is a two-pack of white, three-side speaker/lighting stand cover scrims built to fit any brand of 5–6 ft tripod stand. Each scrim is made from stretchable Lycra (90% polyester / 10% spandex) so it conforms tightly to edges and stand geometry, giving your rig a smooth, finished look for venues, photos, and video.

Setup is designed for fast event pacing: the bottom uses three leg pockets (feed the tripod legs through to lock placement), and the top secures with a Velcro strap to keep the scrim pulled clean and uniform. For visual impact, you can add lighting inside the scrim to create standout effects while keeping stands visually tidy.

Care is built for repeat use: the fabric is machine washable (cold water) and intended to stay wrinkle-free thanks to the stretch material. A high-quality ProX zip-up bag is included for transport and storage between gigs.

Important use note: these scrims are for temporary use only and are not for permanent installation. Keep away from open flames, sparks, direct heat, and electrical fixtures/outlets. Do not use harsh chemicals or chlorine bleach. Factory fire retardant loses effectiveness with washing and over time; re-treat as needed.

Real-World Applications and Sound Roles:

• Real-World Applications: weddings, birthdays, corporate events, product launches, mobile DJ rigs, and clean stage presentation.
• Real-World Applications: uplighting-style looks by placing lighting inside the scrim for fast room transformation.
• Sound Roles: visually cleans up speaker/lighting stands around PA systems by hiding tripod legs and keeping the footprint looking intentional.
• Sound Roles: creates a uniform, professional “finished rig” appearance for FOH and on-camera coverage.

Where the ProX X-SP3SC-WX2 Excels

• Universal Stand Compatibility: designed to fit any manufacturer of 5–6 ft speaker or lighting stand.
• Cleaner Visual Footprint: three-side coverage gives stands a smooth, finished appearance for venues and camera angles.
• Uplighting-Friendly Presentation: add lighting inside the scrim to create instant effects without changing your stand hardware.
• Fast, Repeatable Setup: three bottom leg pockets stabilize placement and speed up load-ins.
• Secure Top Hold: the Velcro strap helps keep the scrim pulled tight and uniform up top.
• Stretch Lycra Fit: 90% polyester / 10% spandex conforms to edges and stand shape “like a glove.”
• Easy Care for Busy Event Weeks: machine washable (cold water); stretch fabric helps stay wrinkle-free (air dry recommended).
• Transport-Ready: includes a ProX zip-up bag for storage and gig-to-gig protection.
• Built for Chicago DJs: ideal for fast ballroom flips and corporate load-ins where a clean, uniform rig look matters.

Three-Side Coverage That Instantly Looks “Finished”

The X-SP3SC-WX2 scrims cover all three sides of each stand, smoothing out the visual clutter that tripod hardware can create in clean-room venues. The white Lycra finish is especially useful for weddings and corporate events where uniform staging and tidy lines read as more professional on-site and on camera.

If you want more impact without more gear, these scrims support the classic “light-from-within” approach: place lighting inside the scrim to create quick visual effects while keeping your stand footprint consistent.

Quick Installation: Leg Pockets + Velcro Top

The bottom of each scrim uses three pockets that secure by feeding the tripod legs through, helping the fabric stay aligned as you position the stand. Up top, a Velcro strap locks the scrim in place so it stays pulled tight instead of sagging or twisting during a set.

• Result: faster load-ins, cleaner symmetry, and less mid-event adjustment.
• Fit behavior: the stretch Lycra (90/10 blend) helps the scrim conform to edges for a glove-like look.

Care, Safety, and Temporary-Use Guidance

These scrims are built for repeated event use and easy reset: machine wash cold, avoid harsh chemicals and chlorine bleach, and air dry (recommended). The stretch material is intended to stay wrinkle-free for quick turnarounds.

Use is temporary only (not permanent installation). Keep away from open flames, sparks, direct heat, and electrical fixtures/outlets. Factory fire retardant loses effectiveness with washing and over time; re-treat as needed.

How to Deploy ProX X-SP3SC-WX2 in the Field

Deploy the X-SP3SC-WX2 like a finishing layer after your stands are positioned. Open the scrim and feed each tripod leg into its corresponding bottom pocket so the fabric “locks” around the base and stays aligned. Once the base is seated, pull the scrim upward and secure the top with the Velcro strap to keep the material tight and uniform.

• For uplighting-style effects: place lighting inside the scrim and confirm the scrim is kept away from direct heat sources and electrical fixtures/outlets.
• For clean sightlines: rotate the stand so the open side faces away from primary audience camera angles when possible.
• For repeatability: keep the included zip-up bag as your “scrim kit” so the pair is always packed together for fast load-outs.

A fast way to turn basic tripod stands into a uniform, uplight-ready presentation for weddings, corporate rooms, and mobile DJ rigs.

Why Choose the ProX X-SP3SC-WX2 from AVMaxx:

Scrims look simple until you are in a tight load-in window and the room still needs to feel “finished.” AVMaxx helps you choose the right stand-fit range, deploy it cleanly, and avoid common mistakes (like poor pocket alignment or unsafe placement near heat/fixtures). For event pros, the payoff is consistency: a uniform, polished rig that reads professional in-person and on camera.

AVMaxx is your go-to for ProX scrim solutions—practical setup guidance, venue-aware recommendations, and support that keeps Chicago DJs and event teams show-ready.