Elite Sound Quality
Feel the warmth of the mixer’s natural sound and hear every detail in the music. We've adopted studio-quality 96-kHz/64-bit mixing and dithering processing within the D S P, as well as 32-bit high-quality A/D and D/A converters. All of this, plus the low-jitter clock circuit, helps produce a full low-end that’s complemented by vibrant mids and precise highs.
Choose your ideal setup and plug in everything from CDJs and turntables to samplers, synths, and drummachines. To make setup e a s y, the analog input terminals line up with each channel on the top panel, so you’ll always know where to connect your cables when you’re in the booth.
Sculpt your sound just the way you like with the newly developed 4-band EQ. The frequencies, curves,and boost and cut amounts on each band have all been specially designed to give you total flexibility.Completely isolate the high and/or low and tweak the two mid ranges – which have their own customcurves – to fine-tune your mix.
New filter with dedicated knob on each channel
Drastically change the sound of a track or make tiny adjustments using the newly developed filter withresonance control. Switch on high or low pass by pressing either button, then turn the knob from all the way to the left (no filter applied) to the furthest position on the right (maximum filter applied). Because the high and low pass are separated, the entire range of the knob is dedicated to the option you choose,giving you twice the resolution to play with compared to the filter on the DJM-900NXS2. This means youcan make much more nuanced adjustments to the effect.
Send audio to one of four built-in FX and up to two pieces of external equipment to create unique soundsand even live remixes. Yo u can connect a variety of units to the TRS jack send/return terminals such as guitar pedals, FX units, and more.The built-in send/return FX are Short D e l a y, Long Delay, Dub Echo, and Reverb. With parameter knobsat your fingertips, you can further tweak the FX as follows:
- Size/Feedback: changes the room size when using a reverb, and the feedback amount whenusing delays and echoes.
- Time: adjusts the decay time of the reverb and the delay time for delays and echoes.
- Tone: changes the hue of the effected sound, making it deep and heavy or light and crisp.
- Master Mix Level: acts as the overall volume of the effected sound when Master Mix is turnedon.Whether you’re using external equipment or the built-in FX, you decide where you want to return the audio to. Route it to an empty channel and make further changes to the effected sound using the EQ and filter. Yo u can even drop it straight into your mix by turning on the Master Mix to route it to the master output.
3-band master isolator
Effortlessly control the tone of your entire mix using the 3-band master isolator, which features new boost/cut curves and adjustments to the crossover frequencies and other parameters. Grab the large dials and hype up the crowd by drastically changing the sound.
Compressor knob on each channel
If you want to play old or un-mastered tracks but you’re worried they’ll be overwhelmed by the loudness of music made with modern production techniques, the DJM-V10 has the solution. Turn the compressor knob on the relevant channel and the mixer will “beef up” the audio in real time. The quieter the track, the more pressure is added, boosting the sound of “weaker” tracks and having a minimal effect on mastered music.
Dual headphones output and booth EQ
Plug in your headphones at the same time as another DJ and enjoy independent monitoring. Each headphones output has its own Cue/Master Mix control and level adjustment knob so you can choose what you want to hear as you prepare to take over the decks, or during back-to-back sets. And, with booth EQ, you can tweak the sound from the monitor speakers to prevent ear fatigue during long sets.
Support for external devices, apps, and services DJ software
Control rekordbox, TRAKTOR PRO 3, and Serato DJ Pro*1. RMX-1000 for iPadPlug in your iPad via M ULT I I/O, open the RMX-1000 for iPad app, and trigger FX and pre-assigned samples to build up and break down tracks in sync with the beat. ShowKontrol The DJM-V10 supports the extended PRO DJ LINK ShowKontrol protocol. This enables DJs, technical producers, LJs, and VJs to use all the important information from the DJM-V10, such as actual fader and knob positions, to effectively align sound and visuals and create shows that blow audiences away.On top of this, some of the DJM-V10 settings can be remotely configured via ShowKontrol software. DJM-REC Efficiently record and easily archive your mixes via the DJM-REC app for iPhone or iPad. Upload your sounds to cloud services or effortlessly live-stream your sets.
- Lockable power cable*2 – avoid accidental disconnection
- DIN Midi out – sync external production gear using the BPM from rekordbox