The Pioneer DJ DDJ-SX3 and DAS Audio Vantec Complet DJ System is guaranteed to perform in large venues with Ease. Powered By D.A.S Audio Vantec Series powered speakers giving you approx 9000 Watts of total Power! By combining two moving-yoke fixtures into a single instrument, it makes it easy to program truly sophisticated shows that will Captivate your clients while you Drop the Beats with the best Serato DJ Pro Controller bundled with a fancy DJ Z Table.
Boost your creativity with the Pioneer DDJ-SX3 4-channel DJ controller for Serato DJ Pro. Expanding on the features of our popular DDJ-SX2 controller, the DDJ-SX3 is strong yet portable with a familiar layout and lower latency jog wheels. Loaded with advanced features, this controller is ideal for professional mobile DJs performing at club nights, parties, weddings and corporate events.
Collaborate with MCs, rappers or singers by plugging in 3 different microphones at once via the 3 Mic inputs, then control EQs and apply FX to each. Connect 2 computers at the same time for easy DJ changeovers via the dual USB ports. Coming with free Pitch ‘n Time DJ and Serato Flip Expansion Packs, you can stretch, mix and cut with precision.
– Active Curved Source Line Array
– Class D Bi-amplified 1500 Wpeak
– FIR filters for linear phase response
– 1 x DAS 12F4C + 2 x M-60 compression drivers
– Compact design with high output capabilities
– DAScontrol™ with presets and configurations
– DASlink™ wireless streaming and remote control
– New Click-Lock™ rigging super fast and secure
– +/- 13.5º variable tilt pole mount
The Vantec-20A is an active curved source line array that incorporates an arsenal of hi-tech solutions designed to provide the versatility needed by today’s sound hire professionals. Whether it be stacked on the Vantec-118A companion subwoofer, flown in a compact array, or used alone on a speaker stand, the Vantec -20A can be used effectively in an incredible number of applications that include corporate A/V, mid-size sound reinforcement, and permanent installation.
Designed for use in arrays of up to 5 units, the Vantec-20A is ideal for applications where the power and long-throw characteristics of large line arrays are not needed. Fast and simple deployment is guaranteed thanks to the exclusive DAS Click-Lock™ rigging hardware which allows the system to be securely flown from or stacked on the Vantec-118A. Individual units can be mounted on tripods with precise aiming possible thanks to the variable angle pole mount which allows for 13.5º up or down tilt.
The DAScontrol™ interface allows users to easily configure the Vantec-20A systems for use individually or in combination with other units. Selectable high pass filter presets facilitate alignment with the Vantec-18A and Vantec-118A active bass systems without external processing. Throw compensation settings and array size selection can all be handled simply via the DAScontrol™ interface. When the Vantec-20A is used individually, the DASlink™ APP can be used to stream music in high definition stereo and remotely control the systems functions.
The enclosure is manufactured using Baltic birch plywood and finished with the DAS ISO-flex coating. Power is supplied by a cutting-edge 1500 Wpeak Class D amplifier in a biamplified configuration driving a single DAS 12F4C loudspeaker and twin M-60 compression drivers.
- Powered subwoofer system
- 4000 Wpeak Class D amplifier
- User definable 24-bit DSP with LCD screen
- Presets: Deep, Loud, Cardioid
- Variable Low Pass Filter
- Sub level gain control, polarity reverse
The Vantec 218A is a powered bass subwoofer system designed to provide extended bass response for the Vantec full-range cabinets. A powerful amplifier drives dual D.A.S. 18LX long excursion bass loudspeakers incorporating 4" voice coils and massive magnet structures provide high power handling and impressive output.
The Vantec 218A is powered by a Class D amplifier with switch mode power supply, digital signal processing and a 4000 Wpeak power rating. Signal processing for the Vantec 218A is accomplished by way of a powerful DSP providing unparalleled control over critical signal parameters. Users can select configurations by way of a rotary-knob interface on the rear of the cabinet. A range of presets and low pass filters allow the Vantec 218A to be matched acoustically with the Vantec full-range cabinets.
The compact Vantec 218A cabinet is manufactured using birch plywood and is finished with a coating of the highly resistant ISO-flex black paint for durability. Handles on the sides and the rear of the cabinet along with two rear located wheels make moving the box easier. The powder-coated steel front grille protects the D.A.S. components.
Chauvet DJ Intimidator Spot 155
The Chauvet DJ Intimidator Spot 155 is a bright, compact, and
lightweight LED moving head, perfect for mobile applications. Rely on it
to energize any dance floor with fast and precise movements, crisp
optics and even output. Built-in performance features like separate
color and gobo wheels, ultrasmooth dimming and adjustable strobe speed
enhance any light show. Minimize programming time with built-in movement
macros, move-in-black features and sound-activated and automated
programs that can generate a synchronized show in master/slave mode.
This user-friendly fixture also offers individual reset of pan/tilt,
color, and gobo. Multiple units can be power linked to save time running
cables and extension cords. Fits best in the CHS-X5X VIP Gear Bag.