1. Rane SIXTY-TWO-Z
Rane SIXTY-TWO-Z
Rane SIXTY-TWO-Z

Rane SIXTY-TWO-Z

Professional Dj Mixer
Item ID: 3190
1 Review(s) Write a Review
On Sale: $2,199.99 $2,099.99
Retail Price:$2,299.99
AVMaxx Savings:$200.00(9%)
Starting at $141/mo with Apply Now >>

Availability: NOT IN STOCK   Free Shipping

Rane SIXTY-TWO-Z

Rane's Sixty-Two Z is a plug-and-play package supporting 2 computers, 2-deck digital vinyl simulation, SP-6 sample player, software and hardware effects and all the record and playback channels you need. Software controls for Library, Loops, Cues and SP-6 are laid out for fast and intuitive access.

The Rane Sixty-Two Z Mixer supports both analog and Digital Vinyl Simulation (DVS) playback. The mixer is bundled with Serato Scratch Live and includes a fully integrated MIDI controller for software controls.

A typical setup includes operation with 2 Scratch Live DVS channels, SP-6 sample player on an independent USB Aux playback channel and Software effects enabled on the USB digital insert in the FlexFx loop. This setup also allows recording PGM1 post-fader, PGM2 post-fader and the Main mix. (NOTE: Only Serato Scratch Live comes with the Sixty-Two Z mixer, all other units are sold separately.)

Features:

  • hepard Fairey-designed face plate
  • Purple & yellow accents
  • Custom purple cables (2 USB, 4 RCA)

Includes:

  • Sixty-Two Z Mixer
  • 2 purple USB cables
  • 4 purple and white RCA cables
  • Printed color manual
  • Quick Start/Keyboard Shortcuts page
  • 2 Serato Control Vinyl Records
  • 2 Serato Control CDs
  • Scratch Live software install disc
  • IEC C5 line cord

Includes:

  • Bundled with Serato Scratch Live along with ASIO and Core Audio Drivers.
  • Control Library, Cues, Loops and Samples on two computers with more than 40 software controls.
  • Each USB port supports six stereo record and four stereo playback channels.
  • 32-bit floating point audio processing sampled at 48 kHz.
  • PGM controls include:
    - Gain trim, 3-band full-cut EQ, Left/Right Pan, HP/LP Filter with adjustable resonance.
    - FlexFx assign, Headphone Cue assign, Q-peak meter.
    - Magnetic fader with contour and reverse controls.
  • Mic/line input on XLR/TRS jack with gain trim, two-band EQ, FlexFx assign and On/Over controls.
  • Internal Effects Engine with Filter, Flanger, Phaser, Echo, Robot and Reverb effects:
    - MIDI beat clock tracking and generation.
    - BPM sync with Scratch Live.
    - TAP engine with time encoder and beat multiplier control.
  • External analog insert for analog effects processor and USB Insert for software effects.
  • USB Aux Input for SP-6 sample playback with HP/LP Filter, Headphone Cue and FlexFx assign.
  • Magnetic crossfader and channel faders with reverse and contour controls.

Mixer Controls:

  • Mic input has switchable mic or line-level with 2-band full-cut tone and pan controls. The Mic can route to FlexFX or record to USB. Mic Over ducks other PGM sources by 12 dB.
  • Two Program buses:
    - Select either USB port for playback and MIDI.
    - Four Phono / Line Inputs.
    - Left / Right Pan.
    - 3-band full-cut tone controls.
    - Sweepable Low / High-pass filter.
  • 2 USB ports, each with 6 stereo record channels and 4 stereo playback channels simultaneously available, allows 2 DJs with their own laptops to share the mixer. The button assigns the SP-6 sample player to the indicated USB port.
  • In Auto mode, Loop buttons use the Scratch Live autoloop, lighting the buttons orange. In Manual mode, Loop buttons use manual looping features, lighting the buttons green. Select knob adjusts the loop length.
  • Back buttons shift between crates & tracks. Scroll knob scrolls crates & tracks, click it to load the track to a deck.
  • Level controls on each Output:
    - Main Output on XLR jacks.
    - Booth Output on 1/4" TRS.
    - Session Output on RCA.
  • FlexFX are stackable:
    - 6 internal effects with seamless on-beat switching between effects.
    - External Insert engages the external analog Effects Loop.
    - Insert engages software effects through USB.
  • Cues button = amber: Recall Cue Points with "Hot Cue" behavior in Scratch Live. Samples button = red: Play samples from the SP-6 sample player in Scratch Live.
  • Aux Input is from the USB playback stereo pair 5-6, usually from the SP-6 sample player. You can sweep the Low-pass / High-pass filter and use FlexFX on samples.
  • True Split Cue for any Program bus or the FlexFX submix with effects to the front panel 1/4" and 3.5 mm headphone jacks.
  • The FlexFx Loop can create a sub-mix with any combination of the two Program buses, Mic, and USB feed, and then add internal or external effects. This submix may be recorded via the USB Send, or output by the analog FlexFx Loop Send.
  • MIDI mapping is done for you as the Sixty-Two Z is plug-and-play with Serato Scratch Live. Advanced users can custom map most mixer controls to many other 3rd-party audio programs. The MIDI control assignments are in the Sixty-Two Manual.
  • Contour controls adjust the faders and the Crossfader for a smooth transistion or a fast cut.
  • The Crossfader and channel faders are no-noise, no-bleed, no-contact magnetic faders.

FlexFx
The FlexFx Bus in the Sixty-Two Z works differently than other basic effect insert solutions. The FlexFx Bus is more like an auxiliary bus that can have multiple signals assigned to it. Those combined signals can have internal effects, external analog effects and external USB effects applied in any combination. This architecture is very flexible and not at all like simply inserting an effect in a signal path and turning it on. The order of processing in the FlexFx Bus is:
1. FlexFx assign for each PGM1, PGM2, USB AUX and MIC.
2. Internal Effects
3. Ext. Analog Insert
4. USB Insert
5. Cue
6. FlexFx On

Internal Audio Effects
The six built-in effects are:

  • Filter
  • Flanger
  • Phaser
  • Hold Echo
  • Robot
  • Reverb

An exciting feature is the Sixty-Two?s ability to synchronize its internal effects to songs tagged with BPM values in Serato Scratch Live.

EXternal Audio Effects
Your favorite stereo effects unit, connected to the FlexFX Loop Send and Return, can be inserted independently or in combination with other effects.

USB EFFECTS
The DJ-FX plugin included with Scratch Live gives you control of two more FX units, each with three chained effects slots per unit. Enable and control DJ-FX in Scratch Live and apply by using the FlexFX USB Insert.

Specifications:

  • Analog Inputs: 4 Stereo unbalanced RCA jacks
    - Phono or Line level input: Rear panel switches for each input
    - Phono Response: RIAA ñ1 dB, Gain: 30 dB at 1 kHz
    - Max Phono Input: 150 mV
    - Max Line Input: 4 Vrms
  • ADCs: 24-bit, 48 kHz; Dynamic range 101 dB A-weighted
  • DACs: 24-bit, 48 kHz; Dynamic range 107 dB A-weighted
  • Digital Signal Processing: 48 kHz, 32-bit floating point
  • USB Audio: Six Stereo Record, Four Stereo Playback
    - 48 kHz, 32-bit floating point
  • FlexFX Return: Stereo unbalanced 1/4" TS (tip-sleeve) phone jack
  • FlexFX Send: Stereo unbalanced 1/4" TS phone jack
  • Mic Input Balanced: 1/4" TRS & XLR combination jack
    - Tone Controls: 2-band, High and Low
    - Mic-Line level switch: Choose Line to connect wireless receiver
  • Line Outputs: Frequency Response 20 Hz to 20 kHz ñ0.25 dB, Line in to Line out
    - THD+N: <0.01% re 0 dBFS, 20 to 20 kHz, 20 kHz BW
    - Unbalanced jacks (RCA & FlexFX): Maximum 4 Vrms
    - Balanced jacks (Main & Booth): Maximum 8 Vrms
  • Universal Power Supply: 100 to 240 VAC, 50 Hz to 60 Hz, 15 W max
  • USB Power: Mixer is self-powered
  • Unit Size: 14.25" x 10.5" x 3.25" (36.2 x 26.7 x 8.3 cm)
  • Unit Weight: 10 lbs (4.3 kg)
  • Shipping Size: 7.75" H x 15" W x 19.25" D (19.7 x 38.1 x 49 cm)
  • Shipping Weight: 14 lbs (6.4 kg)

Catalog Request

TOP
0 Items